[RADIATOR] EAP-PEAP,EAP-TTLS to Radiator to LDAP

[Alexander Hartmaier]

We are using Radiator successfully for wired dot1x with PEAP-TLS and wireless PEAP-TLS and EAP-TLS for years.
You can find quite a lot of example configs in the goodies directory all starting with eap_.

Best regards, Alex

On 2013-02-27 14:34, benson, john wrote:
I used radiator years ago for a much simpler task than what I have in mind now.  We have a need to authenticate wired clients via Cisco switches using EAP-PEAP and EAP-TTLS to a radius server, where the radius server converts that authentication request into a secure LDAP authentication request to be passed on to our LDAP server which front-ends our Microsoft AD.  We currently use Juniper SBR for similar authentication tasks, however, we've hit a limitation with this particular requirement.  Can someone point me to some additional documentation that confirms or denies radiator's ability to do this?

Regards

John Benson




_______________________________________________
radiator mailing list
radiator at open.com.au<mailto:radiator at open.com.au>
http://www.open.com.au/mailman/listinfo/radiator



*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*
T-Systems Austria GesmbH Rennweg 97-99, 1030 Wien
Handelsgericht Wien, FN 79340b
*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*
Notice: This e-mail contains information that is confidential and may be privileged.
If you are not the intended recipient, please notify the sender and then
delete this e-mail immediately.
*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20130227/25fa24f5/attachment.html