[RADIATOR] Radiator

[Sudhir Harwalkar]

Hi Heikki,

I have replaced current <client> clause with whatever you mentioned below, but in log file it shows an error.
Please see the command line message in screenshot "cmd_msg.PNG" also see the log file attached with this.
Yes my AP IP is 192.168.37.184.

In the log file as I found .directory is not found need to mention the path for directory?
 If possible please make changes in the log file attached with this and send me, I will verify with this.

Thanks in Advance
Sudhir H


-----Original Message-----
From: radiator-bounces at open.com.au [mailto:radiator-bounces at open.com.au] On Behalf Of Heikki Vatiainen
Sent: Thursday, March 22, 2012 4:08 AM
To: radiator at open.com.au
Subject: Re: [RADIATOR] Radiator

On 03/21/2012 11:40 AM, Sudhir Harwalkar wrote:

> Thanks Heikki, I installed Net-SSLeay.ppd.

Ok, good to hear.

> 1.Please find the radius.cfg file, in that I have added AP IP address and Authentication port, is that correct way that I mentioned in the config file radius.cfg file or need to make some other things and where do I need to mention Shared Secrete.

Try replacing your current <Client> clause with this:

Trace 4
LogStdout
AuthPort 1812
AcctPort 1813
# This clause defines a single client to listen to <Client 192.168.37.184>
        Secret   GSDEMO
</Client>

AuthPort and AcctPort do not go into Client and I am assuming
192.168.37.184 is your AP.

I added Trace 4 and LogStdout so that you will easily see the debug and other messages on the console.

> 2. send me command for running radius.cfg file, that I have stored in c:/ProgramFile.

First, see http://www.open.com.au/radiator/install-demo.html and the installation instructions there. They give examples how to start radiusd (Radiator).

Typically something like this should work:

perl c:\perl\bin\radiusd -trace 4 -config_file c:\path\to\your.conf

--
Heikki Vatiainen <hvn at open.com.au>

Radiator: the most portable, flexible and configurable RADIUS server anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS, TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP, DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS, NetWare etc.
_______________________________________________
radiator mailing list
radiator at open.com.au
http://www.open.com.au/mailman/listinfo/radiator


Larsen & Toubro Limited

www.larsentoubro.com

This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cmd_msg.PNG
Type: image/png
Size: 56190 bytes
Desc: cmd_msg.PNG
Url : http://www.open.com.au/pipermail/radiator/attachments/20120322/60aae081/attachment-0001.png 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: radius.cfg
Type: application/octet-stream
Size: 1516 bytes
Desc: radius.cfg
Url : http://www.open.com.au/pipermail/radiator/attachments/20120322/60aae081/attachment-0002.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logfile
Type: application/octet-stream
Size: 658 bytes
Desc: logfile
Url : http://www.open.com.au/pipermail/radiator/attachments/20120322/60aae081/attachment-0003.obj