[RADIATOR] RSAAM 7.1 using ACE

[Steve K.]

I figured out how to start the web gui and how to run other cfg files. thanks for the help. hopefully i can get the securid piece working then move onto the wireless portion.




________________________________
From: Timothy A. Sawyer <tsawyer at mybowlingdiary.com>
To: Steve K. <kovets at yahoo.com>; Grant Le Brun <Grant.LeBrun at signify.net>; radiator at open.com.au
Sent: Tue, March 30, 2010 6:53:26 PM
Subject: RE: [RADIATOR] RSAAM 7.1 using ACE

 
You don’t necessarily have to install the agent. If you have
access to the ACE Authentication API you can just follow the instructions for
installing the supporting files. You still have to create the RADIUS host in
the 7.1 Security console.
 
-          Tim Sawyer
 
From:radiator-bounces at open.com.au
[mailto:radiator-bounces at open.com.au] On Behalf Of Steve K.
Sent: Tuesday, March 30, 2010 9:36 PM
To: Grant Le Brun; radiator at open.com.au
Subject: Re: [RADIATOR] RSAAM 7.1 using ACE
 
Thanks
Grant.

I actually was following the implementation guide you recommended and it
instructed to copy the sdconf.rec file from the RSA Server to C:\Windows\System32
on the Radiator host. While I did that, I did not realize I had to install the
RSA Agent software as well.

Just a couple of follow ups relating to PERL (i think) ...

1) How do I run a  specific .cfg file (other than the default)

2) How do I get the Radiator web GUI to load?

Thanks again

Steve
 
 

________________________________
 
From:Grant Le Brun
<Grant.LeBrun at signify.net>
To: radiator at open.com.au
Cc: Steve K. <kovets at yahoo.com>
Sent: Tue, March 30, 2010 5:07:41 PM
Subject: RE: [RADIATOR] RSAAM 7.1 using ACE

Steve,
    You might want to start with the RSA Secured Implementation
Guide for configuring RSA AM 7.1 with Radiators 'AuthBy ACE' handler, it's
available here: https://gallery.emc.com/docs/DOC-1385?viewTab=collateral&version=6

The error you are getting relating to ACECLNT.dll suggests that you haven't
installed the RSA Authentication Agent software on your server that is running
Radiator. You can download this from RSA here: http://www.rsa.com/node.aspx?id=1175 

As you're using RSA AM 7.1 I'd recommend looking at using the 'AuthBy RSAAM'
handler instead, guide available here https://gallery.emc.com/docs/DOC-1386?viewTab=collateral&version=10

I hope that helps. 


Regards,

--
Grant 


From: radiator-bounces at open.com.au [mailto:radiator-bounces at open.com.au]
On Behalf Of Steve K.
Sent: 31 March 2010 00:14
To: radiator at open.com.au
Subject: [RADIATOR] RSAAM 7.1 using ACE

Good Day,
I am trying to get Radiator to authenticate against RSA AM 7.1 using the ACE
authentication module. I have never used PERL before so this is all quite
foreign to me.
 
I did install Radiator (on a Windows 2003 server) and was able to use radpwtest
to confirm that basic authentication worked (using the radius.cfg  file).
 
However, this is where I am stuck. 
 
How do I run radius using the ace.cfg file - i tried
perl c:\perl\bin\radiusd - config_file ace.cfg
 
but get this error:
 
Could not read config file 'ace.cfg': No such file or directory at (eval 8)
line
 176, <_> line 575.
        ...caught at c:\perl\bin\radiusd
line 2, <_> line 575.
 
I then tried copying ace.cfg into C:\Program Files\Radiator and
changed the filename to radius.cfg. 
 
Now when i run 
perl c:\perl\bin\radiusd
I get the following error: 
 
The application has failed to start because ACECLNT.dll was not found.
 
I am lost at this point.
 
Also, how do i get the web-based GUI to load?
 
Thank you very much in advance. 
 
Steve
 
 
 


The information in this e-mail and in any attachments is CONFIDENTIAL and may
be privileged. If you are NOT the intended recipient, please destroy this
message and notify the sender immediately.
Any views expressed in this message are those of the individual sender, EXCEPT
where the sender specifically states them to be the views of Signify.

Registered in England number 3915262 registered office: Signify Solutions
Limited, Endeavour House, Chivers Way, Vision Park, Histon, Cambridge,
Cambridgeshire, CB24 9ZR


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20100330/8676eea7/attachment-0001.html