[RADIATOR] RSAAM 7.1 using ACE

[Grant Le Brun]

Steve,
	You might want to start with the RSA Secured Implementation Guide for configuring RSA AM 7.1 with Radiators 'AuthBy ACE' handler, it's available here: https://gallery.emc.com/docs/DOC-1385?viewTab=collateral&version=6

The error you are getting relating to ACECLNT.dll suggests that you haven't installed the RSA Authentication Agent software on your server that is running Radiator. You can download this from RSA here: http://www.rsa.com/node.aspx?id=1175 

As you're using RSA AM 7.1 I'd recommend looking at using the 'AuthBy RSAAM' handler instead, guide available here https://gallery.emc.com/docs/DOC-1386?viewTab=collateral&version=10

I hope that helps. 


Regards,

--
Grant 


From: radiator-bounces at open.com.au [mailto:radiator-bounces at open.com.au] On Behalf Of Steve K.
Sent: 31 March 2010 00:14
To: radiator at open.com.au
Subject: [RADIATOR] RSAAM 7.1 using ACE

Good Day,
I am trying to get Radiator to authenticate against RSA AM 7.1 using the ACE authentication module. I have never used PERL before so this is all quite foreign to me.
 
I did install Radiator (on a Windows 2003 server) and was able to use radpwtest to confirm that basic authentication worked (using the radius.cfg  file).
 
However, this is where I am stuck. 
 
How do I run radius using the ace.cfg file - i tried
perl c:\perl\bin\radiusd - config_file ace.cfg
 
but get this error:
 
Could not read config file 'ace.cfg': No such file or directory at (eval 8) line
 176, <_> line 575.
        ...caught at c:\perl\bin\radiusd line 2, <_> line 575.
 
I then tried copying ace.cfg into C:\Program Files\Radiator and changed the filename to radius.cfg. 
 
Now when i run 
perl c:\perl\bin\radiusd
I get the following error: 
 
The application has failed to start because ACECLNT.dll was not found.
 
I am lost at this point.
 
Also, how do i get the web-based GUI to load?
 
Thank you very much in advance. 
 
Steve
 
 
 


The information in this e-mail and in any attachments is CONFIDENTIAL and may be privileged. If you are NOT the intended recipient, please destroy this message and notify the sender immediately.
Any views expressed in this message are those of the individual sender, EXCEPT where the sender specifically states them to be the views of Signify.

Registered in England number 3915262 registered office: Signify Solutions Limited, Endeavour House, Chivers Way, Vision Park, Histon, Cambridge, Cambridgeshire, CB24 9ZR