[RADIATOR] How do I configure a Juniper NAS for Radius?

[王冠]

Hi ,

I was configure a Juniper as NAS , I got in trouble with Radius, When i use
Framed-IP-Address,I found it could't asign IP(10.0.0.2) to remote clients
and report 691 error.

But when i configure a local address pool on Juniper device , Remote
clients would be  asigned IPs form the address pool.

I want to use address pool " POOOL1"for  remote user PC1 at abc.com   .and use
address pool "POOL2" for user PC2 at xyz.com .

or use Framed-IP-Address assign IPs to remote-client.

Any suggests to slvoe this problem ?
**
Belows was the config on Radius and Juniper.

Radius configure:
pc1 at abc.com  Password=pc2
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address=10.0.0.2,
Framed-IP-Netmask = 255.255.255.255,

pc2 at xyz.com   Password=pc2
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address=10.1.1.2,
Framed-IP-Netmask = 255.255.255.255,


Juniper configure:
radius authentication server x.x.x.x
radius accounting server x.x.x.x
radius update-source-addr x.x.x.x
aaa authentication ppp default radius
aaa accounting ppp default radius
!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.open.com.au/pipermail/radiator/attachments/20090404/f9abf38d/attachment.html>