No subject
Tue Jun 24 01:20:26 CDT 2008
MS-MPPE-Encryption-Types is set to 0=20
Anybody know how to set the value of MS-MPPE-Encryption-Types to 1 or 2 =
on a Windows
2000 server. On the windows 2000 client, it goes as far as "registering =
your computer on remote
network" then it immediately comes up with "the remote comuter does not =
support the required
encryption type" - when I configure the VPN client to require =
encryption.
I noticed that Radiator actually send an access-accept packet to the =
windows RAS and also
that the windows RAS immediately send another accounting request packet =
back to radiator
stating that the user was disconnected at "user's request". Any ideas?
Acct-Output-Packets =3D 13
Acct-Input-Packets =3D 12
Acct-Terminate-Cause =3D User-Request =20
The original access-request is below:
Sat May 18 08:51:04 2002: DEBUG: Packet dump:
*** Received from 80.247.140.4 port 1109 ....
Code: Accounting-Request
Identifier: 3
Authentic: <219><145><210><146><203><226>\<12><185>;<248><171>tEO<230>
Attributes:
Acct-Status-Type =3D Start
Acct-Delay-Time =3D 0
NAS-IP-Address =3D 80.247.140.4
Service-Type =3D Framed-User
Framed-Protocol =3D PPP
NAS-Port =3D 5
MS-RAS-Vendor =3D 311
MS-RAS-Version =3D "MSRASV5.00"
NAS-Port-Type =3D Virtual
Tunnel-Type =3D 0:PPTP
Tunnel-Medium-Type =3D 0:IP
Calling-Station-Id =3D "172.31.1.18"
Tunnel-Client-Endpoint =3D 49:72.31.1.18
Acct-Session-Id =3D "133"
User-Name =3D "kdavid"
Framed-IP-Address =3D 80.247.156.36
Framed-MTU =3D 1500
Session-Timeout =3D 54596
Acct-Multi-Session-Id =3D "3"
Acct-Link-Count =3D 1
Event-Timestamp =3D 1027622370
Acct-Authentic =3D RADIUS
MS-MPPE-Encryption-Types =3D 0=20
------=_NextPart_000_0057_01C23418.B38718B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi All, Hi Hugh,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Okay, I am back with my encryption =
questions=20
:-)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>From the accouting request below, I =
noticed=20
that MS-MPPE-Encryption-Types is set to 0 =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Anybody know how to set the =
value=20
of MS-MPPE-Encryption-Types to 1 or 2 on a Windows</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>2000 server. On the windows 2000 =
client, it goes as=20
far as "registering your computer on remote</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>network" then it immediately comes up =
with "the=20
remote comuter does not support the required</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>encryption type" - when I configure the =
VPN client=20
to require encryption.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I noticed that Radiator actually send =
an=20
access-accept packet to the windows RAS and also</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>that the windows RAS immediately send =
another=20
accounting request packet back to radiator</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>stating that the user was disconnected =
at "user's=20
request". Any ideas?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2> =20
Acct-Output-Packets =3D 13<BR> =
Acct-Input-Packets =3D 12<BR> =20
Acct-Terminate-Cause =3D User-Request =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The original access-request is =
below:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Sat May 18 08:51:04 2002: DEBUG: Packet =
dump:<BR>*** Received from 80.247.140.4 port 1109=20
....<BR>Code: =20
Accounting-Request<BR>Identifier: 3<BR>Authentic: =20
<219><145><210><146><203><226>\<12=
><185>;<248><171>tEO<230><BR>Attributes:<BR>&n=
bsp; =20
Acct-Status-Type =3D Start<BR> =
Acct-Delay-Time =3D 0<BR> =
NAS-IP-Address=20
=3D 80.247.140.4<BR> =
Service-Type =3D=20
Framed-User<BR> =
Framed-Protocol =3D=20
PPP<BR> NAS-Port =3D=20
5<BR> MS-RAS-Vendor =3D=20
311<BR> MS-RAS-Version =3D=20
"MSRASV5.00"<BR> NAS-Port-Type =
=3D=20
Virtual<BR> Tunnel-Type =3D=20
0:PPTP<BR> Tunnel-Medium-Type =
=3D=20
0:IP<BR> Calling-Station-Id =
=3D=20
"172.31.1.18"<BR> =20
Tunnel-Client-Endpoint =3D=20
49:72.31.1.18<BR> =
Acct-Session-Id =3D=20
"133"<BR> User-Name =3D=20
"kdavid"</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> =20
Framed-IP-Address =3D =
80.247.156.36<BR> =20
Framed-MTU =3D 1500<BR> =
Session-Timeout=20
=3D 54596<BR> =
Acct-Multi-Session-Id =3D=20
"3"<BR> Acct-Link-Count =3D=20
1<BR> Event-Timestamp =3D=20
1027622370<BR> Acct-Authentic =
=3D=20
RADIUS<BR> =
MS-MPPE-Encryption-Types =3D=20
0 </FONT></DIV></BODY></HTML>
------=_NextPart_000_0057_01C23418.B38718B0--
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list