(RADIATOR) Radiator4 serverhttp web GUI login failed

[ScottXiao163]

Hello Mike
I am reinstalling it. during installation I saw my files skipped. I had a 
3.14 installed before.Do I need to remove 3.14 before install 4.0?

C:\Radiator\Radiator-Locked-4.0>perl makefile.pl install
Skipping C:\Perl\site\lib\Radius\AddressAllocatorDHCP.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\AddressAllocatorGeneric.pm (unchanged
Skipping C:\Perl\site\lib\Radius\AddressAllocatorSQL.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\AES.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\ApplePasswordServer.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\AttrList.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\AttrVal.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\AuthACE.pm (unchanged)
Skipping C:\Perl\site\lib\Radius\AuthADSI.pm (unchanged)

....

Thanks
Scott
----- Original Message ----- 
From: "Mike McCauley" <mikem at open.com.au>
To: "ScottXiao163" <scottshaw at 163.com>
Cc: "Radiator MailingList" <radiator at open.com.au>
Sent: Wednesday, February 20, 2008 6:43 PM
Subject: Re: (RADIATOR) Radiator4 serverhttp web GUI login failed


> Hello Scott,
>
> I have just tested the config file and users file you sent, and they work 
> fine
> here.
>
> I notice that you have configured the users file to be ./users, whereas 
> your
> earlier tests, the users file was in c:/Program Files/Radiator/users, and
> Radiator was installed in c:\Radiatorinstallv4\Radiator-Locked-4.0 . Is 
> the
> users file really in the same directory as where you are running Radiator?
>
> I suspect that Radiator is not looking at the files you think its looking 
> at.
>
> Cheers.
>
> On Wednesday 20 February 2008 20:22, ScottXiao163 wrote:
>>  Hi Team
>> I need your advice on web GUI login .
>> I installed radiator 4 on my XP laptop after perl's module installation 
>> and
>> radpwtst  done;  and started with the sample serverhttp config file with
>> some small changes in order to make sure the daemon read this correct
>> file.But it always failed to let me login the admin page.No matter if I
>> changed port, the authby,user file,etc. I copy the serverhttp .conf to
>> programfiles\radiator\ and ran it.The error captured below and also in
>> attachment.Please advise, thanks!
>> Regards
>> Scott
>>
>>
>> <Port changed>
>> http://localhost:9058/login
>>
>>
>> Radiator 4.0 on L-068134-A (LOCKED). Not logged in
>>      Bad username or password
>>             Log in to access Radiator.
>>             Username:
>>             Password:
>
> -- 
> Mike McCauley                               mikem at open.com.au
> Open System Consultants Pty. Ltd            Unix, Perl, Motif, C++, WWW
> 9 Bulbul Place Currumbin Waters QLD 4223 Australia 
> http://www.open.com.au
> Phone +61 7 5598-7474                       Fax   +61 7 5598-7070
>
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
> TTLS, PEAP etc on Unix, Windows, MacOS, NetWare etc.
>
> --
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message. 


--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.