(RADIATOR) Problem with windows install of radiator 3.16

[Alex Sharaz]

Just installed a copy of radiator 3.16 on a windows 2003 virtual server
along with openssl-0.9.8e and the appropriate extension from the
radiator site.
I've also installed the patch file from 270207 for 3.16

When I try and perform a peap auth I get 

Wed Mar  7 14:06:04 2007: ERR: Could not load EAP module Radius::EAP_25:
Can't load 'C:/Perl/site/lib/auto/Net/SSLeay/SSLeay.dll' for module
Net::SSLeay: load_file:The specified module could not be found at
C:/Perl/lib/DynaLoader.pm line 230.
 at C:/Perl/site/lib/Radius/EAP_25.pm line 24
Compilation failed in require at C:/Perl/site/lib/Radius/EAP_25.pm line
24.
BEGIN failed--compilation aborted at C:/Perl/site/lib/Radius/EAP_25.pm
line 24.
Compilation failed in require at (eval 83) line 3.


I've checked and the SSLeay.dll module is in there. I've also tried to
reinstall SSLeay via the ppm again but it doesn't seem to make any
difference.

Alex

Log output:-

Wed Mar  7 12:20:19 2007: DEBUG: Finished reading configuration file
'C:\Program Files\Radiator\radius.cfg'
Wed Mar  7 12:20:19 2007: DEBUG: Reading dictionary file 'c:\Program
Files\Radiator/dictionary'
Wed Mar  7 12:20:19 2007: DEBUG: Creating authentication port
150.237.54.135:1645
Wed Mar  7 12:20:19 2007: DEBUG: Creating authentication port
150.237.54.135:1812
Wed Mar  7 12:20:19 2007: DEBUG: Creating accounting port
150.237.54.135:1646
Wed Mar  7 12:20:19 2007: DEBUG: Creating accounting port
150.237.54.135:1813
Wed Mar  7 12:20:19 2007: NOTICE: Server started: Radiator 3.16 on rd1
Wed Mar  7 13:18:00 2007: DEBUG: Finished reading configuration file
'C:\Program Files\Radiator\radius.cfg'
Wed Mar  7 13:18:00 2007: DEBUG: Reading dictionary file 'c:\Program
Files\Radiator/dictionary'
Wed Mar  7 13:18:00 2007: DEBUG: Creating authentication port
150.237.54.135:1645
Wed Mar  7 13:18:00 2007: DEBUG: Creating authentication port
150.237.54.135:1812
Wed Mar  7 13:18:00 2007: DEBUG: Creating accounting port
150.237.54.135:1646
Wed Mar  7 13:18:00 2007: DEBUG: Creating accounting port
150.237.54.135:1813
Wed Mar  7 13:18:00 2007: NOTICE: Server started: Radiator 3.16 on rd1
Wed Mar  7 14:06:04 2007: DEBUG: Packet dump:
*** Received from 150.237.74.200 port 1024 ....
Code:       Access-Request
Identifier: 59
Authentic:  <212>Y<3>'7j<208><218>|<198><149><234><0>c$b
Attributes:
	Framed-MTU = 1480
	NAS-IP-Address = 150.237.74.200
	NAS-Identifier = "CC_Alex_HP3400-24"
	User-Name = "ccsas at hull.ac.uk"
	Service-Type = Framed-User
	Framed-Protocol = PPP
	NAS-Port = 5
	NAS-Port-Type = Ethernet
	NAS-Port-Id = "5"
	Called-Station-Id = "00-17-a4-88-c6-20"
	Calling-Station-Id = "00-16-76-c3-e6-c3"
	Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex"
	Tunnel-Type = 0:VLAN
	Tunnel-Medium-Type = 0:802
	Tunnel-Private-Group-ID = 740
	EAP-Message = <2><1><0><21><1>ccsas at hull.ac.uk
	Message-Authenticator =
<182><229>4<12><166><247>.E<13><169>U$<163><140>H<166>

Wed Mar  7 14:06:04 2007: DEBUG: Handling request with Handler
'Realm=hull.ac.uk'
Wed Mar  7 14:06:04 2007: DEBUG: Handling with Radius::AuthFILE: eapAuth
Wed Mar  7 14:06:04 2007: DEBUG: Handling with EAP: code 2, 1, 21
Wed Mar  7 14:06:04 2007: DEBUG: Response type 1
Wed Mar  7 14:06:04 2007: ERR: Could not load EAP module Radius::EAP_25:
Can't load 'C:/Perl/site/lib/auto/Net/SSLeay/SSLeay.dll' for module
Net::SSLeay: load_file:The specified module could not be found at
C:/Perl/lib/DynaLoader.pm line 230.
 at C:/Perl/site/lib/Radius/EAP_25.pm line 24
Compilation failed in require at C:/Perl/site/lib/Radius/EAP_25.pm line
24.
BEGIN failed--compilation aborted at C:/Perl/site/lib/Radius/EAP_25.pm
line 24.
Compilation failed in require at (eval 83) line 3.

Wed Mar  7 14:06:04 2007: DEBUG: EAP result: 1, Unsupported default EAP
Response/Identity 25
Wed Mar  7 14:06:04 2007: DEBUG: AuthBy FILE result: REJECT, Unsupported
default EAP Response/Identity 25
Wed Mar  7 14:06:04 2007: INFO: Access rejected for ccsas at hull.ac.uk:
Unsupported default EAP Response/Identity 25
Wed Mar  7 14:06:05 2007: DEBUG: Packet dump:
*** Sending to 150.237.74.200 port 1024 ....
Code:       Access-Reject
Identifier: 59
Authentic:  <212>Y<3>'7j<208><218>|<198><149><234><0>c$b
Attributes:
	Reply-Message = "Request Denied"


-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: not available
URL: <http://www.open.com.au/pipermail/radiator/attachments/20070307/01b206c6/attachment.ksh>