(RADIATOR) Radiator crashes without trace

[Martin Wallner]

Thanks for your fast answer. 

> So when you say "crashes" and "stops", is the perl process 
> that's running radiusd still in the process list or is it gone?

No, radiusd is gone with the perl process.

> 
> Does your system log show anything (eg, /var/log/messages)?

I searched every possible logfile, no avail... :-/

> 
> Are you low on disk or RAM?

Both Systems have 1GB RAM, and are dedicated RADIUS-Server..

> 
> Does the box get too hot?

Climatized, and in 2 different locations.

> 
> Do you have any patches installed?

WhiteBox 3 with all upgrades. Perl is on 5.8.0...


> 
> You might want to try swapping out the RAM from the 
> problematic box with the box that's working fine and see what 
> happens...

That is the problem: the error is on _both_ boxes (they are identical DL360 with the same hardware stuffed in...). The radiator-installation I talked about which is NOT crashing has nothing to do with these two boxes... And since _everything else_ running on the questionable boxes is running perfectly, I'm a bit stuck... 

There is the possibility that I'm running the radiusd under the wrapper, but that would be fighting the symptom, and not the problem... 

Yes, that I forgot: I'm running Radiator 3.11... 

regards
Martin Wallner (=mw=)

-----
Eunet Telekom GmbH			e-mail 'martin.wallner at eunet.co.at
vorm. Nextra Österreich			e-mail 'martin.wallner at nextranet.at'
vorm. ViP EDV-Dienstleistungs GesmbH	e-mail 'hostmaster at vip.at'
vorm. Gramtel Austria GmbH.		e-mail 'hostmaster at gramtel.at'
Systems					RIPE:     WM355-RIPE
Nussdorfer Lände 23			NicAT:    WM503823-NICAT
1190 Wien, Vienna, Austria		Tel. +43 (0) 59 1 59 - 1354     

--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.