(RADIATOR) Emergency - Please help

[Craig Gittens]

Ok Mike. I get that the only variable it replaces is the IP. But can I
possibly get a patch that will replace the username since it is in the stop
packet?

Desperate,

Craig.

Fri Aug 29 09:32:35 2003: DEBUG: Packet dump:
*** Received from 205.214.223.130 port 1646 ....
Code:       Accounting-Request
Identifier: 209
Authentic:  <177><206><16><161><244><205>Ya/<219>2<148><243>~`j
Attributes:
	NAS-IP-Address = x.x.x.x
	NAS-Port = 311
	NAS-Port-Type = Async
	User-Name = "cbravo"
	Called-Station-Id = "1111111111"
	Calling-Station-Id = "111111111111"
	Acct-Status-Type = Stop
	Acct-Authentic = RADIUS
	Service-Type = Framed-User
	Acct-Session-Id = "000005C5"
	Framed-Protocol = PPP
	Tunnel-Server-Endpoint = 192.168.255.20
	Tunnel-Client-Endpoint = 10.193.5.9
	Tunnel-Type = 0:L2TP
	Tunnel-Client-Auth-ID = lnsbios3
	Tunnel-Server-Auth-ID = sunbeachrout
	Tunnel-ID = 43383
	Framed-IP-Address = 66.205.10.9
	Acct-Terminate-Cause = Host-Request
	Acct-Input-Octets = 184107
	Acct-Output-Octets = 1256882
	Acct-Input-Packets = 2436
	Acct-Output-Packets = 2427
	Acct-Session-Time = 5073
	Acct-Delay-Time = 0



-----Original Message-----
From: owner-radiator at open.com.au [mailto:owner-radiator at open.com.au]On
Behalf Of Mike McCauley
Sent: Friday, August 29, 2003 8:56 AM
To: Craig Gittens; Radiator
Cc: Hugh Irvine
Subject: Re: (RADIATOR) Emergency - Please help


Hello Craig,


On Fri, 29 Aug 2003 10:27 pm, Craig Gittens wrote:
> I have been having endless problems with an upgrade the modem providers
> have done. What I am seeing now is that IP allocation is done and gives
6-8
> IP addresses to the same person. Ok we are investigating and I will get
> back to you with data. However, in the mean time I want to add the
> Deallocate Query and change the default query to use USERNAME = %2 instead
> of looking for the IP used in the stop packet. This would solve my porblem
> temporarily. However when I add it to the config and restart radius at
> debug, it still uses the default query. Is it a bug with 3.6.0?

Sounds curious. BTW The only positional arg that is used by DeallocateQuery
is
%0, which is replaced by the address.

If Radiator is not using the Deallocate Query in your config file, then the
possibilites are:

1. You have incorrect spelling or capitalisaiton of DeallocateQuery
2. The config file you changed is _not_ the one that Radiaotr is not
actually
using (Radiator will tell you which it read in the log file when it starts
up).

To tell more we would need to see your configuraiton file (no secrets) and a
log file at trace level 4.

Cheers.



===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.