(RADIATOR) radpwtst does not authenticate
Alan Murrell
alan at zoolink.net
Fri Aug 8 10:17:43 CDT 2003
Hello,
Sorry for the delay in response, but I did not get a chance to do further testing on this until now (I left my original post intact down at the bottom of this message in case a refresher is needed <grin>).
> You should run "radiusd" from the command line first so you can see if
> there are any errors:
> perl radiusd -foreground -log_stdout -trace 4 -config_file .....
Nope, no errors. Here is the output from the above:
[root at winnie radius]# perl ./radiusd -foreground -log_file /usr/local/radius/log_20030808.log -trace 4 -config_file ./radius.cfg
Fri Aug 8 08:00:43 2003: INFO: Server started: Radiator 2.18.2 on winnie.domain.com
> If you still have problems please send me a copy of your configuration
> file (no secrets) together with a trace 4 debug from startup as shown
> above.
Configuration file and trace 4 output are below. Hopefully they help?
> BTW - the latest version of Radiator is 3.6 (plus patches) so you might
> want to consider upgrading.
Yup, considered that, but unfortunately, I am unable to find our license information, which I assume i would need to upgrade. Besides that, I also wanted to use the same version as our currently-working RADIUS server, so I could use the same config file and setup (which I am).
Note: Hostnames, passwords, and IP addresses have been changed for protection.
--- trace 4 output ---
Fri Aug 8 08:00:43 2003: INFO: Server started: Radiator 2.18.2 on winnie.domain.com
Fri Aug 8 08:00:56 2003: DEBUG: Packet dump:
*** Received from 127.0.0.1 port 32772 ....
Code: Access-Request
Identifier: 86
Authentic: 1234567890123456
Attributes:
User-Name = "greg"
Service-Type = Framed-User
NAS-Identifier = "203.63.154.1"
NAS-Port = 1234
Client-Port-DNIS = "123456789"
Caller-Id = "987654321"
NAS-Port-Type = Async
User-Password = "<1><234><150><20>L<231><131><163><160><2><251><31>9'<202><154>"
Fri Aug 8 08:00:56 2003: DEBUG: Handling request with Handler 'Realm=DEFAULT'
Fri Aug 8 08:00:56 2003: DEBUG: Rewrote user name to greg
--- trace 4 output ---
--- radius.cfg ---
Foreground
LogStdout
Trace 3
PidFile /var/run/radiusd.pid
AuthPort 1645
AcctPort 1646
LogDir /var/log
DbDir /usr/local/radius/raddb
LogFile %L/radius
DictionaryFile %D/dictionary
DictionaryFile %D/dictionary.ascend
<Client DEFAULT>
Secret PROTECTED
DupInterval 0
NasType Cisco
IdenticalClients 10.10.10.1
</Client>
<Realm DEFAULT>
RewriteUsername tr/[A-Z/[a-z]/
AcctLogFileName %L/detail
PasswordLogFileName %L/password
<AuthBy EMERALD>
DBSource dbi:ODBC:boddingtons
DBUsername platuser
DBAuth PROTECTED
AccountingTable Calls
AcctColumnDef UserName,User-Name
AcctColumnDef CallDate,Timestamp,integer-date
AcctColumnDef AcctStatusType,Acct-Status-Type,integer
AcctColumnDef AcctDelayTime,Acct-Delay-Time,integer
AcctColumnDef AcctInputOctets,Acct-Input-Octets,integer
AcctColumnDef AcctOutputOctets,Acct-Output-Octets,integer
AcctColumnDef AcctSessionId,Acct-Session-Id
AcctColumnDef AcctSessionTime,Acct-Session-Time,integer
AcctColumnDef AcctTerminateCause,Acct_Terminate-Cause
AcctColumnDef NASIdentifier,NAS-Identifier
AcctColumnDef NASIdentifier,NAS-IP-Address
AcctColumnDef NASPort,NAS-Port,integer
AcctColumnDef FramedAddress, Framed-Address
AuthSelect ,sa.LoginLimit
AuthColumnDef 0,Simultaneous-Use,check
</AuthBy>
</Realm>
<SessionDatabase SQL>
DBSource dbi:ODBC:boddingtons
DBUsername platuser
DBAuth PROTECTED
</SessionDatabase>
--- radius.cfg ---
TIA for your help.
Alan Murrell <alan at zoolink.net>
On Saturday, Aug 2, 2003, at 05:48 Australia/Melbourne, Alan Murrell
wrote:
> Hello,
>
> Mandrake 9.1
> Radiator 2.18
> iODBC 3.06
> FreeTDS 0.53 (using version 4.2 "emulation")
> DBD-ODBC 1.05
> Connection to MSSQL database (Platypus)
>
> I am setting up a secondary RADIUS server, just in case our primary
> ones goes kaput (plus, the current RADIUS server is due for a *major*
> upgrade!)
>
> I insatlled the above, and since the current RADIUS server is running
> Radiator 2.18, I just copied over the configs, dictionary files, and
> '/etc/odbc.ini' file to the new server, so all the configs should be
> identical. The current RADIUS server is also using iODBC (albeit a
> little older), and FreeTDS.
>
> I started Radiator with the following command:
>
> /usr/local/radiusd -daemon
>
> It started fine. However, I tried testing with radpwtst. All I get
> is:
>
> --- CUT HERE ---
> [root at winnie radius]# ./radpwtst
> sending Access-Request...
> No reply
> sending Accounting-Request Start...
> No reply
> sending Accounting-Request Stop...
> No reply
> --- CUT HERE ---
>
> Nothing appears in the /var/log/radius log files. I do not believe
> the current RADIUS server uses OpenLink. If need be, I can post some
> of the configs here.
>
> Thank you, in advance, for any help and insight you are able to offer.
>
> Alan Murrell <alan at zoolink.net>
>
>
>
>
>
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
>
>
NB: have you included a copy of your configuration file (no secrets),
together with a trace 4 debug showing what is happening?
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list