(RADIATOR) radiator on solaris SPARC

[Ayotunde Itayemi]

Hi Eapen, hi All,

This is no longer radiator but ...
By the way, I couldnt install the DBD-Oracle perl module - it seems
anything short of a full Oracle DB install wont work - I installed only
the runtime client so now I have to reinstall the whole thing again.
Now whenever I start the Oracle installer, it crashes out with a JVM error!
Why me! :-(

Eapen, what sort of SUN do you have? I also have a Netra X1 here with me
that the owner has lost its LOMlite password.
I got some info from tech-tips about resetting a jumper on the board
(J13) but that was for a larger SUN machine so I couldnt find the jumper
on the board. I noticed though that there is a jumper right next to the
flash card on the SUN ... :-)

Any ideas?

Regards,
Tunde I.


----- Original Message ----- 
From: "Eapen Joseph" <eapen at q8online.com>
To: "Ayotunde Itayemi" <aitayemi at metrong.com>
Cc: "Elias" <elias at tmnet.com.my>; <radiator at open.com.au>;
<richard at bactel.net>
Sent: Wednesday, August 06, 2003 5:41 AM
Subject: Re: (RADIATOR) radiator on solaris SPARC


> hi,
> i have radiator working fine without any problem on sun. The compiler
> i've used is workshop6. All the perl modules installation also went
> fine.
>
> rgds
> eapen
>
> ----- Original Message -----
> From: "Ayotunde Itayemi" <aitayemi at metrong.com>
> Date: Tuesday, August 5, 2003 2:06 pm
> Subject: Re: (RADIATOR) radiator on solaris SPARC
>
> > Hi Elias, hi Richard,
> >
> > You are both right! To think I spent the whole of yesterday on this!
> > I have started installing the perl modules in less than 30minutes!
> >
> > Ok. I uninstalled perl 5.005 which came with Solaris and installed the
> > GNU perl 5.6.1 instead ( I had done that before reading Richard's
> > reply)I guess I could have kept both.
> >
> > I also installed the GNC gcc 3.3 and libgcc 3.3
> >
> > soft-linked /usr/ucb/cc to /usr/local/bin/gcc
> >
> > and I am compiling away!
> >
> > Thanks, it goes to show that "Knowledge is indeed power!"
> >
> > Tunde Itayemi.
> >
> >  ----- Original Message ----- 
> >  From: Elias
> >  To: Ayotunde Itayemi
> >  Sent: Tuesday, August 05, 2003 11:00 AM
> >  Subject: Re: (RADIATOR) radiator on solaris SPARC
> >
> >
> > ***********************
> > Your mail has been scanned by TMnet VirusWall.
> > ***********************
> >
> >
> >
> >  Hi,
> >
> >  I'm running my Radiator setup on Solaris 8 with an Oracle DB. I
> > think your problem is more with Perl. The default Perl
> > installation that comes with Solaris is linked to use cc. I
> > normally reinstall Perl to get it to run with gcc.
> >    ----- Original Message ----- 
> >    From: Ayotunde Itayemi
> >    To: radiator at open.com.au
> >    Cc: Hugh Irvine
> >    Sent: Tuesday, August 05, 2003 5:31 PM
> >    Subject: (RADIATOR) radiator on solaris SPARC
> >
> >
> > ***********************
> > This e-mail was scanned by TM Net E-Mail Virus Shield.
> > ***********************
> >
> >
> >
> >
> >    Hi All,
> >
> >    I have a Netra X1 (Solaris 8 SPARC) (and also a Sun SureFire
> > v100) and I have tried without
> >    sucess to install radiator on them.
> >    I can't install most perl modules either, and yes I have seen
> > all the mails on the net about
> >    installing GNU gcc and pointing the cc (wrapper) for the
> > inexistent SUN compiler to gcc.
> >
> >    perl Makefile.PL works everytime but make always bombs with
> > something similar to
> >    (see below). I have tried both the solaris make and the GNU
> > make (v 3.80)
> >
> >    someone suggested gcc 2.95.2 which is supposed to be
> > compatible with most OS,
> >    I have also tried 3.2.2 and 3.3.
> >
> >    Has anyone installed radiator on solaris 8 sparc? and used it
> > with a database?
> >    I was able to install the Oracle 9i client by the way on the s.
> >    perl version is 5.005_03
> >
> >    Thanks.
> >    Regards,
> >    Tunde I.
> >
> >    =================================================
> >    cp Changes blib/lib/DBI/Changes.pm
> >    cc -c   -xO3 -xdepend    -DVERSION=\"1.21\" -
> > DXS_VERSION=\"1.21\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE -
> > DDBI_NO_THREADS Perl.c
> >    cc: unrecognized option `-KPIC'
> >    cc: language depend not recognized
> >    cc: Perl.c: linker input file unused since linking not done
> >    /usr/bin/perl -I/usr/perl5/5.00503/sun4-solaris -
> > I/usr/perl5/5.00503 /usr/perl5/5.00503/ExtUtils/xsubpp  -typemap
> > /usr/perl5/5.00503/ExtUtils/typemap DBI.xs >xstmp.c && mv xstmp.c
> > DBI.c    cc -c   -xO3 -xdepend    -DVERSION=\"1.21\" -
> > DXS_VERSION=\"1.21\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE -
> > DDBI_NO_THREADS DBI.c
> >    cc: unrecognized option `-KPIC'
> >    cc: language depend not recognized
> >    cc: DBI.c: linker input file unused since linking not done
> >    Running Mkbootstrap for DBI ()
> >    chmod 644 DBI.bs
> >    LD_RUN_PATH="" cc -o bli    cc: DBI.o: No such file or directory
> >    cc: No input files
> >    make: *** [bli    bash-2.03#
> >
> >
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.