(RADIATOR) radiator on solaris SPARC

[Eapen Joseph]

hi,
i have radiator working fine without any problem on sun. The compiler 
i've used is workshop6. All the perl modules installation also went 
fine.

rgds
eapen

----- Original Message -----
From: "Ayotunde Itayemi" <aitayemi at metrong.com>
Date: Tuesday, August 5, 2003 2:06 pm
Subject: Re: (RADIATOR) radiator on solaris SPARC

> Hi Elias, hi Richard,
> 
> You are both right! To think I spent the whole of yesterday on this!
> I have started installing the perl modules in less than 30minutes!
> 
> Ok. I uninstalled perl 5.005 which came with Solaris and installed the
> GNU perl 5.6.1 instead ( I had done that before reading Richard's 
> reply)I guess I could have kept both.
> 
> I also installed the GNC gcc 3.3 and libgcc 3.3
> 
> soft-linked /usr/ucb/cc to /usr/local/bin/gcc
> 
> and I am compiling away!
> 
> Thanks, it goes to show that "Knowledge is indeed power!"
> 
> Tunde Itayemi.
> 
>  ----- Original Message ----- 
>  From: Elias 
>  To: Ayotunde Itayemi 
>  Sent: Tuesday, August 05, 2003 11:00 AM
>  Subject: Re: (RADIATOR) radiator on solaris SPARC
> 
> 
> ***********************
> Your mail has been scanned by TMnet VirusWall.
> ***********************
> 
> 
> 
>  Hi,
> 
>  I'm running my Radiator setup on Solaris 8 with an Oracle DB. I 
> think your problem is more with Perl. The default Perl 
> installation that comes with Solaris is linked to use cc. I 
> normally reinstall Perl to get it to run with gcc. 
>    ----- Original Message ----- 
>    From: Ayotunde Itayemi 
>    To: radiator at open.com.au 
>    Cc: Hugh Irvine 
>    Sent: Tuesday, August 05, 2003 5:31 PM
>    Subject: (RADIATOR) radiator on solaris SPARC
> 
> 
> ***********************
> This e-mail was scanned by TM Net E-Mail Virus Shield.
> ***********************
> 
> 
> 
> 
>    Hi All,
> 
>    I have a Netra X1 (Solaris 8 SPARC) (and also a Sun SureFire 
> v100) and I have tried without 
>    sucess to install radiator on them.
>    I can't install most perl modules either, and yes I have seen 
> all the mails on the net about 
>    installing GNU gcc and pointing the cc (wrapper) for the 
> inexistent SUN compiler to gcc.
> 
>    perl Makefile.PL works everytime but make always bombs with 
> something similar to
>    (see below). I have tried both the solaris make and the GNU 
> make (v 3.80)
> 
>    someone suggested gcc 2.95.2 which is supposed to be 
> compatible with most OS, 
>    I have also tried 3.2.2 and 3.3.
> 
>    Has anyone installed radiator on solaris 8 sparc? and used it 
> with a database?
>    I was able to install the Oracle 9i client by the way on the s.
>    perl version is 5.005_03
> 
>    Thanks.
>    Regards,
>    Tunde I.
> 
>    =================================================
>    cp Changes blib/lib/DBI/Changes.pm
>    cc -c   -xO3 -xdepend    -DVERSION=\"1.21\" -
> DXS_VERSION=\"1.21\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE -
> DDBI_NO_THREADS Perl.c
>    cc: unrecognized option `-KPIC'
>    cc: language depend not recognized
>    cc: Perl.c: linker input file unused since linking not done
>    /usr/bin/perl -I/usr/perl5/5.00503/sun4-solaris -
> I/usr/perl5/5.00503 /usr/perl5/5.00503/ExtUtils/xsubpp  -typemap 
> /usr/perl5/5.00503/ExtUtils/typemap DBI.xs >xstmp.c && mv xstmp.c 
> DBI.c    cc -c   -xO3 -xdepend    -DVERSION=\"1.21\" -
> DXS_VERSION=\"1.21\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE -
> DDBI_NO_THREADS DBI.c
>    cc: unrecognized option `-KPIC'
>    cc: language depend not recognized
>    cc: DBI.c: linker input file unused since linking not done
>    Running Mkbootstrap for DBI ()
>    chmod 644 DBI.bs
>    LD_RUN_PATH="" cc -o bli    cc: DBI.o: No such file or directory
>    cc: No input files
>    make: *** [bli    bash-2.03#
> 
> 

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.