(RADIATOR) FW: As requested.
Martin Edge
martinedge at kbs.net.au
Thu Sep 5 02:16:00 CDT 2002
Hey Guys,
On what conditions does a packet appear to Radiator as Duplicate?
Below I attach two RADIUS packets I received, within 1 second of each other.
Of course, the second packet was said to be duplicated, but the packets
themselves would show they are completely different..
Thanks,
Martin :-)
------------------ FIRST PACKET IN ------------------------
Thu Sep 5 00:14:46 2002: DEBUG: Packet dump:
*** Received from 203.194.56.121 port 1813 ....
Code: Accounting-Request
Identifier: 167
Authentic: h<254>]<166>V<243>.<18><245>V<248><0>Y<236><211>v
Attributes:
NAS-IP-Address = 203.220.252.241
NAS-Port = 7204
NAS-Port-Type = Async
Called-Station-Id = "142330886300424"
Calling-Station-Id = "886324356"
Acct-Status-Type = Alive
Acct-Authentic = RADIUS
Service-Type = Framed-User
Acct-Session-Id = "0009E3D8"
Framed-Protocol = PPP
Ascend-Session-Svr-Key = "AA9D6ABD"
Acct-Link-Count = 1
Ascend-Num-In-Multilink = 1
Acct-Multi-Session-Id = "25972"
Framed-IP-Address = 203.220.230.249
Ascend-PreSession-Time = 24
Ascend-Pre-Input-Octets = 157
Ascend-Pre-Output-Octets = 113
Ascend-Pre-Input-Packets = 5
Ascend-Pre-Output-Packets = 4
Acct-Input-Octets = 706094
Acct-Output-Octets = 2766801
Acct-Input-Packets = 5904
Acct-Output-Packets = 5436
Acct-Session-Time = 2286
Ascend-Multilink-ID = 25972
Acct-Delay-Time = 0
User-Name = "andym"
Proxy-State =
BSP2ims01-syd/72480B24F09399CB54AE56B24540BA02B5A54B62BCBA8CA37CCA09027797F0
3488D35E66BCBA8CADB716F56D71F9EC12
430FB8C3BCA889FA4DB97DF311AEA447CFE22D4ED3DCB5B22B8D68F213EE81
Thu Sep 5 00:14:46 2002: DEBUG: Handling request with Handler ''
Thu Sep 5 00:14:46 2002: DEBUG: mysessiondb Adding session for andym,
203.220.252.241, 7204
Thu Sep 5 00:14:46 2002: DEBUG: do query is: delete from RADONLINE where
NASIDENTIFIER='203.220.252.241' and NASPORT=07204
------------------- FIRST PACKET END -----------------------
------------------- FIRST PACKET RESPONSE START ------------
Thu Sep 5 00:14:46 2002: DEBUG: Accounting accepted
Thu Sep 5 00:14:46 2002: DEBUG: Packet dump:
*** Sending to 203.194.56.121 port 1813 ....
Code: Accounting-Response
Identifier: 167
Authentic: h<254>]<166>V<243>.<18><245>V<248><0>Y<236><211>v
Attributes:
Proxy-State =
BSP2ims01-syd/72480B24F09399CB54AE56B24540BA02B5A54B62BCBA8CA37CCA09027797F0
3488D35E66BCBA8CADB716F56D71F9EC12
430FB8C3BCA889FA4DB97DF311AEA447CFE22D4ED3DCB5B22B8D68F213EE81
------------------- FIRST PACKET RESPONSE STOP -------------
------------------- SECOND PACKET START---------------------
Thu Sep 5 00:14:47 2002: DEBUG: Packet dump:
*** Received from 203.194.56.121 port 1813 ....
Code: Accounting-Request
Identifier: 167
Authentic: <2>I<136>PA<3>s<244>{<30>k<191><143>hN<196>
Attributes:
Acct-Session-Id = "00003541"
Framed-Protocol = PPP
Framed-IP-Address = 203.220.218.5
Ascend-Connect-Progress = prLanSessionUp
Ascend-PreSession-Time = 36
Ascend-Xmit-Rate = 33600
Ascend-Data-Rate = 33600
Acct-Session-Time = 12200
Connect-Info = "33600 V34+/V42bis/LAPM"
Acct-Input-Octets = 817119
Acct-Output-Octets = 4990544
Ascend-Pre-Input-Octets = 122
Ascend-Pre-Output-Octets = 114
Acct-Input-Packets = 9177
Acct-Output-Packets = 11655
Ascend-Pre-Input-Packets = 5
Ascend-Pre-Output-Packets = 5
Acct-Terminate-Cause = Session-Timeout
Ascend-Disconnect-Cause = sessTimeOut
Acct-Authentic = RADIUS
Acct-Status-Type = Stop
NAS-Port = 7241
Called-Station-Id = "142320198333414"
Calling-Station-Id = "891881736"
NAS-Port-Type = Async
Service-Type = Framed-User
NAS-IP-Address = 203.220.251.113
Ascend-Session-Svr-Key = "EE3451F2"
Event-Timestamp = 1031148888
Acct-Delay-Time = 0
User-Name = "noseeds"
Proxy-State =
BSP2ims01-syd/7685C184EE7199F2CBEA363B01DDDD1E321B84656D6D2109E1F70235F83144
1D0F6D91616D6D21E52A2BF9E7FE5F5856
C4B14B386D7F2682D08476F99E081003485CE249020B18CAB6B06CF98B543D307C
Thu Sep 5 00:14:47 2002: INFO: Duplicate request id 167 received from
203.194.56.121(1813): ignored
------------------- SECOND PACKET STOP ---------------------
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list