(RADIATOR) Strange Problem, no billing data

[Marcel Welschbillig]

Hugh,

Thanks for the reply. I have attached the config and debug info, i have 
looked at this for many days and found nothing obvious (my knowlege on 
radius is limited) and tried many different things and come to no 
conclusion. If you can see anything wrong please let me know. Also i 
have removed all filters and access lists on the routers between here 
and there and had no luck.

Regards,

Marcel


Hugh Irvine wrote:

> Hello Marcel -
> 
> It sounds like the 2611 is not configured correctly for radius accounting.
> 
> You should do a debug on the 2611 to see what it is doing. You might also 
> check your access lists and filters, as the accounting port number is 
> different from the authentication port (1645/1812 and 1646/1813).
> 
> regards
> 
> Hugh
> 
> 
> On Mon, 11 Mar 2002 16:31, Marcel Welschbillig wrote:
> 
>> Hi,
>> 
>> Was hopping someone can shed some light on our problem, the story goes
>> like this.....
>> 
>> We are running radiator with platypus billing system and things are
>> working fine on our local ISP system. We recently got into the satellite
>> telecommunications business and decided to put a 2611 router out on a
>> remote site with an 8AM analog modem module to provide access to the
>> data stream and authenticate via radiator/platypus. The data stream is
>> via VSAT satellite equipment ( Basicly a serial at both routers with
>> VSAT equipment between, using HDSL Encapsulation, introduces about 700ms
>> delay round trip )
>> 
>> The strange thing is that i can seem to authenticate from the remote
>> 2611 but there is no call/download information sent back. The radius
>> server and platypus server are local and work fine with our other access
>> servers. Why can it authenticate over the SAT link but not send the
>> billing data back ?? I know the radius server and platypus server are
>> configured correctly because they are accounting for our loacl dialin
>> customers, the router is configured nearly identical to our access
>> servers with regards to CISCO aaa.
>> 
>> Any help would be great, i have tried just about everything and dont
>> know where to go next.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: areac-debug
URL: <http://www.open.com.au/pipermail/radiator/attachments/20020311/9f00b603/attachment.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: areac.cfg
URL: <http://www.open.com.au/pipermail/radiator/attachments/20020311/9f00b603/attachment-0001.ksh>