(RADIATOR) RE:PrePaid for Voip

[Chiao Liang]

Hi Neil,
 
I'm using Cisco AS5300 VOIP GW, the session-timeout do work. But it only
will cut off when the call is finish, it would cut off the call half way
when the credit is used up. Therefore I would like to know is there a
way do it, as I might not configure the Radiator correctly.
 
Thanks
 
Chan
 
-----Original Message-----
From: neil d. quiogue [mailto:quioguen at cpcnet-hk.com] 
Sent: Monday, June 17, 2002 2:24 PM
To: Chiao Liang; radiator at open.com.au
Subject: Re: (RADIATOR) RE:PrePaid for Voip
 
Hello,
 
Since your email didn't contain much details, check your VoIP gateway
(or the system that provides call control).  Your VoIP gateway or system
should understand the Session-Timeout RADIUS attribute and implement
session termination.  Check with your vendor on it.
 
Regards,
 
Neil D. Quiogue
 
"Information and attachments herein are intended for the named
recipients
only.  It may contain attorney-client privileged or confidential matter.
If you have received this message in error, please notify the sender
immediately, and destroy the original message.  Do not disclose the
contents to anyone.  Thank you."
----- Original Message ----- 
From: Chiao <mailto:chiaoliang at asiacoms.com>  Liang 
To: radiator at open.com.au 
Sent: Monday, June 17, 2002 12:42 PM
Subject: (RADIATOR) RE:PrePaid for Voip
 
Hi All
 
I'm using Radiator for pre-paid solution, I have an issue with it. As it
will not cut-off the session instantaneously when the pre-paid credit is
using up, it will only cut off the account till the use finish the
session. Is the a way to cut off the user session once the database
credit is use up, needed it for real-time usage.
 
Thanks, with regards
Chan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.open.com.au/pipermail/radiator/attachments/20020617/9f78ae15/attachment.html>