(RADIATOR) cisco avpair questions

[Mike Greene]

Hello again,

Making some progress on this issue but have run into a problem.  We are 
trying to assign IP static addresses via radius, and also have radius 
reference a dynamic IP pool on a cisco 7206vxr router.  We have followed 
the advice given by cisco TAC and suggestions by Hugh here, but still quite 
haven't got it resolved.

We have the following configuration on our cisco:

!
interface Virtual-Template1
  ip unnumbered FastEthernet0/0
  ip mtu 1492
  no peer default ip address pool
  ppp authentication pap centurytel
!
ip local pool centurytel 64.119.12.1 64.119.15.254


And this is a portion of our Radius "users" file for the cisco 
authenticated users.


DEFAULT Client-Identifier = dsl, Auth-Type = System
         Service-Type = Framed-User,
         Framed-Protocol = PPP,
         Framed-Address = 255.255.255.254,
         Framed-Netmask = 255.255.255.0,
         Framed-Routing = None,
         Framed-Compression = Van-Jacobson-TCP-IP,
         Framed-MTU = 1500,
         cisco-avpair = "ip:addr-pool=centurytel"

However when we implement this DSL users will not authenticate and receive 
an IP address.

What are we missing here?

- Mike

------------------------------------------------
Rock Island Communications, Inc.  (360)-378-5884
http://www.rockisland.com/  San Juan Islands, WA
------------------------------------------------

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.