(RADIATOR) User-Name encrypted

Thu Feb 21 04:15:12 CST 2002

    That's right....I knew it was a config change, but I couldn't remember
what it was.  Missed it when looking through all the old backup configs...

-Ronan
----- Original Message -----
From: "Fabio Nitti (TEI)" <Fabio.Nitti at tei.ericsson.se>
To: "Ronan Eckelberry" <radiator at gowebco.com>; "Hugh Irvine"
<hugh at open.com.au>; <radiator at open.com.au>
Sent: Thursday, 21 February, 2002 04:17
Subject: RE: (RADIATOR) User-Name encrypted

Hi all
I solved my problem!
I changed the configuration on Cisco System as5300 in the section "Interface
Group-async1"
I modified the parameter "async mode"
old config: async mode dedicated
new config: async mode interactive

The Nas pass correct user-name now.
thanks a lot
bye

-----Original Message-----
From: Fabio Nitti (TEI) [mailto:Fabio.Nitti at tei.ericsson.se]
Sent: mercoledì 20 febbraio 2002 11.38
To: radiator at open.com.au
Subject: (RADIATOR) User-Name encrypted

Hi All,
I've a problem whit my system Radiator 2.17.1
It receives access-request from dialin throught the Nas
with user-name encrypted
I don't know where is the problem because I did all test with radpwtst GUI
and I verified the correct configuration
The NAS is a Cisco 5300
It doesn't work fine for regular users when I do a dialin connection with
modem and a correct user

The Nas pass a User-name encrypted
This is my logfile
Thanks a lots

*** Received from 113.254.2.2 port 1645 ....
Code:       Access-Request
Identifier: 12
Authentic:  <30>K<223><238><0><201><17><143><239><161><152>/L<211>%d
Attributes:
        NAS-IP-Address = 113.254.2.2
        NAS-Port = 19
        NAS-Port-Type = Async
        User-Name = "}#@!}!} }
$}"}&} } } } }%}&} } }*P}'}"}(}"}-}#}&}1}$}&N}3})}#} PZocV/r~<2>"
        Called-Station-Id = "672908919"
        Calling-Station-Id = "672588404"
        User-Password = "3/<149>|{+-]<141>e at Eq<218><131><140>"

Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Request-Type =
Accounting-Request, Acct-Status-Type = Stop, User-Name = waptim at tilab should
be used to handle this request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Request-Type =
Accounting-Request, Acct-Status-Type = Stop, User-Name = waptim at cuori should
be used to handle this request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Request-Type =
Accounting-Request, Acct-Status-Type = Stop should be used to handle this
request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Request-Type =
Accounting-Request, Acct-Status-Type = Start should be used to handle this
request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Realm = ia should be used
to handle this request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Realm = tilab should be
used to handle this request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler Realm = cuori should be
used to handle this request
Tue Feb 19 20:15:48 2002: DEBUG: Check if Handler  should be used to handle
this request
Tue Feb 19 20:15:48 2002: DEBUG: Handling request with Handler ''
Tue Feb 19 20:15:48 2002: DEBUG:  Deleting session for }#@!}!} }
$}"}&} } } } }%}&} } }*P}'}"}(}"}-}#}&}1}$}&N}3})}#} PZocV/r~, 113.254.2.2,
19
Tue Feb 19 20:15:48 2002: DEBUG: Running command:
/export/home/IVLR/R2.0/bin/ivlr_Authenticator.exe
/export/home/IVLR/R2.0/bin/conf/Authenticator.ini
Tue Feb 19 20:15:53 2002: INFO: Access rejected for }#@!}!} }
$}"}&} } } } }%}&} } }*P}'}"}(}"}-}#}&}1}$}&N}3})}#} PZocV/r~:
Tue Feb 19 20:15:53 2002: DEBUG: Packet dump:
*** Sending to 113.254.2.2 port 1645 ....
Code:       Access-Reject
Identifier: 12
Authentic:  <30>K<223><238><0><201><17><143><239><161><152>/L<211>%d
Attributes:
        Reply-Message = "Request Denied"

Fabio Nitti
===========================================
Research & development Consultant
ANS s.p.a.
c/o
TEI Ericsson Italy
Intelligence Network & Fixed
Mobile Convergence
DT/DW
System Specialist Engineer
Via Anagnina 203 Rome
C.A.P. 00040
tel. +39 0672583246 ECN 839 73246
fax +39 06 72583127
e-mail fabio.nitti at tei.ericsson.se

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.