(RADIATOR) Interpreting Accounting-Response
Hugh Irvine
hugh at open.com.au
Tue Sep 4 17:41:01 CDT 2001
Hello William -
An Accounting-Response is exactly that - the response that Radiator
sends back to the NAS to let it know that the Accounting-Request was
correctly received (the radius protocol is based on UDP, hence the
requirement for the "Ack").
What you show below is a retransmission of an accounting packet
because the NAS either did not receive the initial
Accounting-Response, or it did not understand it or process it
correctly.
You can see that an Accounting-Request is a retransmission by the
presence of a non-zero Acct-Delay-Time attribute. In this case the
second packet has an Acct-Delay-Time = 60, which indicates that this
packet is being retransmitted 60 seconds after the first.
Note that an Accounting-Response does not usually contain any reply attributes.
hth
Hugh
At 16:30 -0400 01/9/4, William Hernandez wrote:
>Hello everyone,
>
>I'm trying to trace a problem that causes multiple accounting
>stop records to be written to my /var/log/radacct/detail. The
>following is an excerpt from Trace 4. I don't know how to
>interpret the Accounting-Response. I see an Identifier that
>matches the Identifier in the Accounting-Request, and an
>Authentic that matches the Authentic in the Accounting-Request.
>But there are no Attributes.
>
>Is the Accounting-Response an accept, a reject, or something
>else?
>
>Thanks in advance,
>William
>
>Mon Aug 27 14:21:28 2001: DEBUG: Packet dump:
>*** Received from 208.249.78.11 port 1813 ....
>Code: Accounting-Request
>Identifier: 48
>Authentic:
><235><208>?i<20><214><167><135>O<26><225><231><226>?K(
>Attributes:
> User-Name = "angelmoran"
> NAS-IP-Address = 208.249.78.11
> NAS-Identifier = "208.249.78.11"
> Acct-Status-Type = Stop
> Acct-Session-Id = "19726770"
> Acct-Delay-Time = 0
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> NAS-Port-Type = Async
> NAS-Port = 309
> USR-Modem-Training-Time = 19
> USR-Interface-Index = 1565
> Chassis-Call-Slot = 2
> Chassis-Call-Span = 2
> Chassis-Call-Channel = 53
> Unauthenticated-Time = 4
> Calling-Station-Id = ""
> Called-Station-Id = "6415050"
> VPN-ID = 0
> Modulation-Type = v90Digital
> Simplified-MNP-Levels = ccittV42SREJ
> Simplified-V42bis-Usage = ccittV42bis
> Connect-Speed = 50666_BPS
> Framed-Protocol = PPP
> Framed-IP-Address = 66.110.2.6
> VTS-Session-Key =
>"<127><26><0>s<153>\<203>9<203><158><207>U<164><28>K<205>"
> Call-Arrived-time = 178478142
> Call-Lost-time = 178482088
> Acct-Session-Time = 3927
> Acct-Terminate-Cause = User-Request
> Disconnect-Reason = 8
> Speed-Of-Connection = 50666
> Acct-Input-Octets = 790359
> Acct-Output-Octets = 5495203
> Acct-Input-Packets = 11831
> Acct-Output-Packets = 14021
>
>Mon Aug 27 14:21:28 2001: DEBUG: Check if Handler
>Realm=surfea.net should be used to handle this request
>Mon Aug 27 14:21:2From owner-radiator at open.com.au Tue Sep 4 16:49:35 2001
Received: (from majordomo at localhost)
by server1.open.com.au (8.11.0/8.11.0) id f84LnZF24389
for radiatorzz-list; Tue, 4 Sep 2001 16:49:35 -0500
X-Authentication-Warning: server1.open.com.au: majordomo set sender to owner-radiator at open.com.au using -f
Received: from entoo.connect.com.au (entoo.connect.com.au [192.189.54.8])
by server1.open.com.au (8.11.0/8.11.0) with ESMTP id f84LnY324386
for <radiator at open.com.au>; Tue, 4 Sep 2001 16:49:34 -0500
Received: from [210.10.222.26] (acc2-ppp26.cai.dialup.connect.net.au [210.10.222.26])
by entoo.connect.com.au (Postfix) with ESMTP
id 06ADCDDBE5; Wed, 5 Sep 2001 09:33:38 +1000 (EST)
Mime-Version: 1.0
X-Sender: hugh at oscar.open.com.au (Unverified)
Message-Id: <f04320402b7bb097cd1d3@[210.10.222.5]>
In-Reply-To: <000b01c13520$981c4660$0ce1a6c3 at linkserve.net>
References: <200108300935.f7U9Zo303768 at server1.open.com.au>
<0108311037581R.00948 at hugo>
<00b301c132eb$ded09700$0ce1a6c3 at linkserve.net>
<f04320400b7b865b0f39a@[210.10.242.241]>
<007d01c13517$4a8a92c0$05e7a6c3 at linkserve.net>
<f04320400b7ba59a77eb3@[210.10.242.185]>
<000b01c13520$981c4660$0ce1a6c3 at linkserve.net>
Date: Wed, 5 Sep 2001 08:45:50 +1000
To: "'Tunde Ogedengbe" <tunde at linkserve.net>
From: Hugh Irvine <hugh at open.com.au>
Subject: (RADIATOR) Re: Radiator on Windows 2000
Cc: <radiator at open.com.au>
Content-Type: text/plain; charset="us-ascii" ; format="flowed"
Sender: owner-radiator at open.com.au
Precedence: bulk
List-Id: <radiator.list-id.open.com.au>
Hello 'Tunde -
You will find the instructions in section 16.4 of the Radiator 2.18.3
reference manual. I would suggest you read the RFC's and the manual
(all found in the "doc" directory) at least once - you will find the
answers to almost all of your questions there.
regards
Hugh
At 11:04 +0200 01/9/4, 'Tunde Ogedengbe wrote:
>We are planning to move our Radiator Radius from Linux to Windows 2000. I
>need instruction on how to make Radiusd run as a service automatically.
>
>'Tunde Ogedengbe
>Linkserve Limited
>22 Akin Adesola Street
>Victoria Island
>Lagos - Nigeria
>Tel: +234 1 2623900
>Fax: +234 1 2623906
>URL: http://www.linkserve.net
>----- Original Message -----
>From: "Hugh Irvine" <hugh at open.com.au>
>To: "'Tunde Ogedengbe" <tunde at linkserve.net>
>Sent: Tuesday, September 04, 2001 12:15 PM
>Subject: Re: Re: (RADIATOR) SimultaneousUse
>
>
>>
>> Hello 'Tunde -
>>
>> There are two different files - one for debug messages (known as the
>> log file), and the other for accounting information (known as the
>> detail file). I need to see a copy of a trace 4 debug file as written
>> to the log file (not an accounting detail file).
>>
>> thanks
>>
>> Hugh
>>
>>
>>
>> At 9:57 +0200 01/9/4, 'Tunde Ogedengbe wrote:
>> >Hugh:
>> >
>> >I dont understand. It was the accounting output (detail) that I sent to
>you
>> >under trace 4 debug. Do you require a different trace level?
>> >
>> >'Tunde Ogedengbe
>> >Linkserve Limited
>> >22 Akin Adesola Street
>> >Victoria Island
>> >Lagos - Nigeria
>> >Tel: +234 1 2623900
>> >Fax: +234 1 2623906
>> >URL: http://www.linkserve.net
>> >----- Original Message -----
>> >From: "Hugh Irvine" <hugh at open.com.au>
>> >To: "'Tunde Ogedengbe" <tunde at linkserve.net>
>> >Sent: Monday, September 03, 2001 12:41 AM
>> >Subject: Re: Re: (RADIATOR) SimultaneousUse
>> >
>> >
>> >>
>> >> Hello 'Tunde -
>> >>
>> >> Thanks for sending this, however it is the accounting output from the
>> >> detail file, not a trace 4 debug. Could you please send me the trace
>> >> 4 debug showing what is happening?
>> >>
>> >> thanks
>> >>
>> >> Hugh
>> >>
>> >>
>> >>
>> >> >Pls find below the sample details records for our connection:
>> >> >
>> >> >Sat Sep 1 15:15:08 2001
>> >> >User-Name = "xxxxx"
>> >> >NAS-IP-Address = x.x.x.x
>> >> >Acct-Status-Type = Stop
>> >> >Acct-Session-Id = "50332430"
>> >> >Acct-Delay-Time = 0
>> >> >Acct-Authentic = RADIUS
>> >> >Service-Type = Framed-User
>> >> >NAS-Port-Type = Async
>> >> >NAS-Port = 769
>> >> >USR-Modem-Training-Time = 16
>> >> >USR-Interface-Index = 2025
>> >> >USR-Chassis-Call-Slot = 4
>> >> >USR-Chassis-Call-Span = 16
>> >> >USR-Chassis-Call-Channel = 1
>> >> >USR-Unauthenticated-Time = 7
>> >> >Calling-Station-Id = ""
>> >> >Called-Station-Id = ""
>> >> >USR-Modulation-Type = v34
>> >> >USR-Simplified-MNP-Levels = NONE
>> >> >USR-Simplified-V42bis-Usage = NONE
>> >> >USR-Connect-Speed = 28800_BPS
>> >> >Framed-Protocol = PPP
>> >> >Framed-IP-Address = x.x.x.x
>> >> >Acct-Session-Time = 93
>> >> >Acct-Terminate-Cause = User-Request
>> >> >Acct-Input-Octets = 4685
>> >> >Acct-Output-Octets = 1756
>> >> >Acct-Input-Packets = 104
>> >> >Acct-Output-Packets = 69
>> >> >Timestamp = 999353708
>> >> >
>> >> >Sat Sep 1 15:15:09 2001
>> >> >Acct-Session-Id = "3100131A"
>> >> >User-Name = "xxxxx"
>> >> >NAS-IP-Address = x.x.x.x
>> >> >NAS-Port = 10
>> >> >Acct-Status-Type = Start
>> >> >Acct-Authentic = RADIUS
>> >> >Service-Type = Framed-User
>> >> >Framed-Protocol = PPP
>> >> >Framed-IP-Address = x.x.x.x
>> >> >Acct-Delay-Time = 0
>> >> >Timestamp = 999353709
>> >> >
>> >> >Sat Sep 1 15:15:09 2001
>> >> >User-Name = "xxxx"
>> >> >NAS-IP-Address = x.x.x.x
>> >> >Acct-Status-Type = Start
>> >> >Acct-Session-Id = "328015"
>> >> >Acct-Delay-Time = 0
>> >> >Acct-Authentic = RADIUS
>> >> >Service-Type = Framed-User
>> >> >NAS-Port-Type = Async
>> >> >NAS-Port = 6
>> >> >USR-Modem-Training-Time = 11
>> >> >USR-Interface-Index = 1262
>> >> >USR-Chassis-Call-Slot = 1
>> >> >USR-Chassis-Call-Span = 1
> > >> >USR-Chassis-Call-Channel = 6
>> >> >USR-Unauthenticated-Time = 4
>> >> >Calling-Station-Id = ""
>> >> >Called-Station-Id = ""
>> >> >USR-Modulation-Type = v34
>> >> >USR-Simplified-MNP-Levels = ccittV42SREJ
>> >> >USR-Simplified-V42bis-Usage = ccittV42bis
>> >> >USR-Connect-Speed = 19200_BPS
>> >> >Framed-Protocol = PPP
>> >> >Framed-IP-Address = x.x.x.x
>> >> >Timestamp = 999353709
>> >> >
>> >> >Sat Sep 1 15:15:10 2001
>> >> >User-Name = "xxx"
>> >> >NAS-IP-Address = x.x.x.x
>> >> >Acct-Status-Type = Start
>> >> >Acct-Session-Id = "1638681"
>> >> >Acct-Delay-Time = 0
>> >> >Acct-Authentic = RADIUS
>> >> >Service-Type = Framed-User
>> >> >NAS-Port-Type = Async
>> >> >NAS-Port = 26
>> >> >USR-Modem-Training-Time = 22
>> >> >USR-Interface-Index = 1282
>> >> >USR-Chassis-Call-Slot = 1
>> >> >USR-Chassis-Call-Span = 1
>> >> >USR-Chassis-Call-Channel = 26
>> >> >USR-Unauthenticated-Time = 6
>> >> >Calling-Station-Id = ""
>> >> >Called-Station-Id = ""
>> >> >USR-Modulation-Type = v90Digital
>> >> >USR-Simplified-MNP-Levels = ccittV42
>> >> >USR-Simplified-V42bis-Usage = ccittV42bis
>> >> >USR-Connect-Speed = 45333_BPS
>> >> >Framed-Protocol = PPP
>> >> >Framed-IP-Address = x.x.x.x
>> >> >Timestamp = 999353710
>> >> >
>> >> >>
>> >> >> Hello 'Tunde -
>> >> >>
>> >> >> Thanks for the configuration file, however I will also need to see
>a
>> >trace
>> >> >4
>> >> >> debug from Radiator showing the problem.
>> > > >>
>> >> >> thanks
>> >> >>
>> >> >> Hugh
>> >> >>
>> >> >>
>> >> >> On Friday 31 August 2001 02:22, 'Tunde Ogedengbe wrote:
>> >> >> > Hugh:
>> >> >> >
>> >> >> > See conf below:
>> >> >> >
>> >> >> > (radius.cfg)
>> >> >> >
>> >> >> > Foreground
>> >> >> >
>> >> >> > LogStdout
>> >> >> >
>> >> >> > Trace 3
>> >> >> >
>> >> >> > PidFile /usr/local/etc/raddb/radiusd.pid
>> >> >> >
>> >> >> > AuthPort 1645
>> >> >> >
>> >> >> > AcctPort 1646
>> >> >> >
>> >> >> > LogDir /usr/local/etc/raddb
>> >> >> >
>> >> >> > DbDir /usr/local/etc/raddb
>> >> >> >
>> >> >> > LogFile %L/logfile.%Y.%m.%d
>> >> >> >
>> >> >> > DictionaryFile %D/dictionary
>> >> >> >
>> >> >> > SnmpgetProg /usr/bin/snmpget
>> >> >> >
>> >> >> > <Client X.X.X.X>
>> >> >> > Secret ****
>> >> >> > IgnoreAcctSignature
>> >> >> > </Client>
>> >> >> >
>> >> >> >
>> >> >> > <Realm DEFAULT>
>> >> >> > AcctLogFileName %L/detail.%Y.%m.%d
>> >> >> >
>> >> >> > RejectHasReason
>> >> >> >
>> >> >> > <AuthBy FILE>
>> >> >> > Identifier Check-FILE
>> >> >> > Filename %D/users
>> >> >> > DefaultSimultaneousUse 1
>> >> >> > </AuthBy>
>> >> >> >
>> >> >> > <AuthBy UNIX>
>> >> >> > Identifier Check-UNIX
>> >> >> > Filename /etc/shadow
>> >> >> > DefaultSimultaneousUse 1
>> >> >> > </AuthBy>
>> >> >> >
>> >> >> > </Realm>
>> >> >> >
>> >> >> >
>> >> >> > 'Tunde Ogedengbe
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > -------- ORIGINAL MESSAGE BELOW --------
>> >> >> >
>> >> >> > Hello Camilo, Hello 'Tunde -
>> >> >> >
>> >> >> > In general, problems with simultaneous use are usually due to
>> >dropped
>> >> > > > accounting packets (sometimes congested links, sometimes NAS
>bugs,
>> >> >> > sometimes
>> >> >> > configuration problems with Radiator).
>> >> >> >
>> >> >> > I am happy to assist with any problems, but I need to see what
>is
>> >> >> > going on.
>> >> >> >
>> >> >> > Please send me a copy of the configuration file (no secrets)
>> >together
>> >> >> > with a
>> >> >> > trace 4 debug from Radiator showing the problem.
>> >> >> >
>> >> >> > It would also be helpful if you could provide some description
>of
>> >> >> > what you
>> >> >> > are trying to accomplish.
>> >> >> >
>> >> >> > thanks
>> >> >> >
>> >> >> > Hugh
>> >> >> >
>> >> >> > On Thursday 30 August 2001 01:04, Camilo Fernando Corena G.
>wrote:
>> >> >> > > I have the same problem.
>> >> >> > >
>> >> >> > > Someone can help us???
>> >> >> > >
>> >> >> > > 'Tunde Ogedengbe wrote:
>> >> >> > > > Hello:
>> >> >> > > >
>> >> >> > > > We are having problems with this attribute. In some of our
> > >> >> > > > installations, the attribute does not work at all and so no
>> >> >restriction
>> >> >> > > > is enforced. On another installation, it works but with
>severe
>> >> >> > > > problems. For instance customers with an attribute of 1 who
>> >> >previously
>> >> >> > > > connected to our system and later disconnected are having
>> >problems
>> >> >> > > > reconnecting. This has resulted in a serious problem in
>which a
>> >> >> > > > significant percentage of connection problems were related
>to
>> >the
>> >> >> > > > SimultaneousUse attribute. What we have done in the interim
>is
>> >to
>> >> >set
>> >> >> > > > the attribute to 3. How can we resolve this problem?
>> >> >> > > >
>> >> >> > > > 'Tunde Ogedengbe
>> >> >> > > > Linkserve Limited
>> >> >> > > > 22 Akin Adesola Street
>> >> >> > > > Victoria Island
>> >> >> > > > Lagos - Nigeria
>> >> >> > > > Tel: +234 1 2623900
>> >> >> > > > Fax: +234 1 2623906
>> >> >> > > > URL: http://www.linkserve.net
>> >> >> > > > ----- Original Message -----
>> >> >> > > > From: "Hugh Irvine" <hugh at open.com.au>
>> >> >> > > > To: "lloyd" <dagocl at team.ph.inter.net>;
><radiator at open.com.au>
>> >> >> > > > Cc: <hugh at open.com.au>
>> >> >> > > > Sent: Wednesday, August 29, 2001 8:48 AM
>> >> >> > > > Subject: (RADIATOR) Re: two authby clauses
>> >> >> > > >
>> >> >> > > > > Hello Lloyd -
>> >> >> > > > >
>> >> >> > > > > What exactly are you trying to do?
>> >> >> > > > >
>> >> >> > > > > thanks
>> >> >> > > > >
>> >> >> > > > > Hugh
>> >> >> > > > >
>> >> >> > > > > On Wednesday 29 August 2001 14:28, lloyd wrote:
>> >> >> > > > > > hi,
>> >> >> > > > > > how do i configure radiator in such a way that before it
>> >proxy's
>> >> >to
>> >> >> > > > > > another radius server, it checks for the
>Called-Station-Id
>> >in
>> >> >say a
>> >> >> > > > > > flat file or a database?
>> >> >> > > > > >
>> >> >> > > > > >
>> >> >> > > > > > will this work (file based with only one field:
>> > > >> > > > > > telephonenumbers).....
>> >> >> > > > > >
>> >> >> > > > > > <AuthBy FILE>
>> >> >> > > > > > Identifier calledstationid
>> >> >> > > > > > FileName %d/Called-Station-ID
>> >> >> > > > > > </AuthBy>
>> >> >> > > > > >
>> >> >> > > > > > <AuthBy RADIUS>
>> >> >> > > > > > Identifier radiusproxy>
>> >> >> > > > > > Host ***.***.***.***
>> >> >> > > > > > Secret ******
>> >> >> > > > > > AuthPort ****
>> >> >> > > > > > AcctPort ****
>> >> >> > > > > > </AuthBy>
>> >> >> > > > > >
>> >> >> > > > > > <Realm>
>> >> >> > > > > > AuthByPolicy ContinueAlways
>> >> >> > > > > > AuthBy calledstationid
>> >> >> > > > > > AuthBy radiusproxy
>> >> >> > > > > > </Realm>
>> >> >> > > > > >
>> >> >> > > > > >
>> >> >> > > > > > Lloyd Dagoc
>> >> >> > > > > > InterDotNet Philippines Inc.
>> >> >> > > > >
>> >> >> > > > > --
>> >> >> > > > > Radiator: the most portable, flexible and configurable
>RADIUS
>> >> >server
>> >> >> > > > > anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT,
>> >MacOS
>> >> >X.
>> >> >> > > > > -
>> >> >> > > > > Nets: internetwork inventory and management - graphical,
>> >> >extensible,
>> >> >> > > > > flexible with hardware, software, platform and database
>> >> >independence.
>> >> >> > > > > ===
>> >> >> > > > > Archive at http://www.open.com.au/archives/radiator/
>> >> >> > > > > Announcements on radiator-announce at open.com.au
>> >> >> > > > > To unsubscribe, email 'majordomo at open.com.au' with
>> >> >> > > > > 'unsubscribe radiator' in the body of the message.
>> >> >> > > >
>> >> >> > > > ===
>> >> >> > > > Archive at http://www.open.com.au/archives/radiator/
>> >> >> > > > Announcements on radiator-announce at open.com.au
>> >> >> > > > To unsubscribe, email 'majordomo at open.com.au' with
>> >> >> > > > 'unsubscribe radiator' in the body of the message.
>> >> >>
>> >> >> --
>> >> >> Radiator: the most portable, flexible and configurable RADIUS
>server
>> >> >> anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS
>X.
>> >> >> -
>> >> >> Nets: internetwork inventory and management - graphical,
>extensible,
>> >> > > flexible with hardware, software, platform and database
>independence.
>> >> >> ===
>> >> >> Archive at http://www.open.com.au/archives/radiator/
>> >> >> Announcements on radiator-announce at open.com.au
>> >> >> To unsubscribe, email 'majordomo at open.com.au' with
>> >> >> 'unsubscribe radiator' in the body of the message.
>> >> >>
>> >>
>> >> --
>> >>
>> >> NB: I am travelling this week, so there may be delays in our
>> >correspondence.
>> >>
>> >> Radiator: the most portable, flexible and configurable RADIUS server
>> >> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
>> >> Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
>> >> Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
>> >>
>>
>> --
>>
>> NB: I am travelling this week, so there may be delays in our
>correspondence.
>>
>> Radiator: the most portable, flexible and configurable RADIUS server
>> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
>> Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
>> Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
>>
--
NB: I am travelling this week, so there may be delays in our correspondence.
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
8 2001: DEBUG: Check if Handler
>Realm=prwebtv.net should be used to handle this request
>Mon Aug 27 14:21:28 2001: DEBUG: Check if Handler
>Realm=holaplaneta.net should be used to handle this request
>Mon Aug 27 14:21:28 2001: DEBUG: Check if Handler
>Realm=prdigital.com should be used to handle this request
>Mon Aug 27 14:21:28 2001: DEBUG: Check if Handler
>Called-Station-Id=/5050$/ should be used to handle this request
>Mon Aug 27 14:21:28 2001: DEBUG: Handling request with Handler
>'Called-Station-Id=/5050$/'
>Mon Aug 27 14:21:28 2001: DEBUG: Rewrote user name to
>angelmoran at prdigital.com
>Mon Aug 27 14:21:28 2001: DEBUG: prdigital-sessiondb Deleting
>session for angelmoran, 208.249.78.11, 309
>Mon Aug 27 14:21:28 2001: DEBUG: do query is: delete from
>RADONLINE where NASIDENTIFIER='208.249.78.11' and NASPORT=0309
>
>Mon Aug 27 14:21:28 2001: DEBUG: Handling with Radius::AuthSQL
>Mon Aug 27 14:21:28 2001: DEBUG: Handling accounting with
>Radius::AuthSQL
>Mon Aug 27 14:21:28 2001: DEBUG: Processing
>PostAuthHook:setSessionTimeout
>Mon Aug 27 14:21:28 2001: DEBUG: setSessionTimeout: username is:
>angelmoran at prdigital.com
>Mon Aug 27 14:21:28 2001: DEBUG: setSessionTimeout:
>Called-Station-Id is: 6415050
>Mon Aug 27 14:21:28 2001: DEBUG: Accounting accepted
>Mon Aug 27 14:21:28 2001: DEBUG: Packet dump:
>*** Sending to 208.249.78.11 port 1813 ....
>Code: Accounting-Response
>Identifier: 48
>Authentic:
><235><208>?i<20><214><167><135>O<26><225><231><226>?K(
>Attributes:
>
>Mon Aug 27 14:22:28 2001: DEBUG: Packet dump:
>*** Received from 208.249.78.11 port 1813 ....
>Code: Accounting-Request
>Identifier: 74
>Authentic:
><195><161><215>Y<134><159>n2k<142><131>!<6>Y<189><236>
>Attributes:
> User-Name = "angelmoran"
> NAS-IP-Address = 208.249.78.11
> NAS-Identifier = "208.249.78.11"
> Acct-Status-Type = Stop
> Acct-Session-Id = "19726770"
> Acct-Delay-Time = 60
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> NAS-Port-Type = Async
> NAS-Port = 309
> USR-Modem-Training-Time = 19
> USR-Interface-Index = 1565
> Chassis-Call-Slot = 2
> Chassis-Call-Span = 2
> Chassis-Call-Channel = 53
> Unauthenticated-Time = 4
> Calling-Station-Id = ""
> Called-Station-Id = "6415050"
> VPN-ID = 0
> Modulation-Type = v90Digital
> Simplified-MNP-Levels = ccittV42SREJ
> Simplified-V42bis-Usage = ccittV42bis
> Connect-Speed = 50666_BPS
> Framed-Protocol = PPP
> Framed-IP-Address = 66.110.2.6
> VTS-Session-Key =
>"<127><26><0>s<153>\<203>9<203><158><207>U<164><28>K<205>"
> Call-Arrived-time = 178478142
> Call-Lost-time = 178482088
> Acct-Session-Time = 3927
> Acct-Terminate-Cause = User-Request
> Disconnect-Reason = 8
> Speed-Of-Connection = 50666
> Acct-Input-Octets = 790359
> Acct-Output-Octets = 5495203
> Acct-Input-Packets = 11831
> Acct-Output-Packets = 14021
>
>Mon Aug 27 14:22:28 2001: DEBUG: Check if Handler
>Realm=surfea.net should be used to handle this request
>Mon Aug 27 14:22:28 2001: DEBUG: Check if Handler
>Realm=prwebtv.net should be used to handle this request
>Mon Aug 27 14:22:28 2001: DEBUG: Check if Handler
>Realm=holaplaneta.net should be used to handle this request
>Mon Aug 27 14:22:28 2001: DEBUG: Check if Handler
>Realm=prdigital.com should be used to handle this request
>Mon Aug 27 14:22:28 2001: DEBUG: Check if Handler
>Called-Station-Id=/5050$/ should be used to handle this request
>Mon Aug 27 14:22:28 2001: DEBUG: Handling request with Handler
>'Called-Station-Id=/5050$/'
>Mon Aug 27 14:22:28 2001: DEBUG: Rewrote user name to
>angelmoran at prdigital.com
>Mon Aug 27 14:22:28 2001: DEBUG: prdigital-sessiondb Deleting
>session for angelmoran, 208.249.78.11, 309
>Mon Aug 27 14:22:28 2001: DEBUG: do query is: delete from
>RADONLINE where NASIDENTIFIER='208.249.78.11' and NASPORT=0309
>
>Mon Aug 27 14:22:28 2001: DEBUG: Handling with Radius::AuthSQL
>Mon Aug 27 14:22:28 2001: DEBUG: Handling accounting with
>Radius::AuthSQL
>Mon Aug 27 14:22:28 2001: DEBUG: Processing
>PostAuthHook:setSessionTimeout
>Mon Aug 27 14:22:28 2001: DEBUG: setSessionTimeout: username is:
>angelmoran at prdigital.com
>Mon Aug 27 14:22:28 2001: DEBUG: setSessionTimeout:
>Called-Station-Id is: 6415050
>Mon Aug 27 14:22:28 2001: DEBUG: Accounting accepted
>Mon Aug 27 14:22:28 2001: DEBUG: Packet dump:
>*** Sending to 208.249.78.11 port 1813 ....
>Code: Accounting-Response
>Identifier: 74
>Authentic:
><195><161><215>Y<134><159>n2k<142><131>!<6>Y<189><236>
>Attributes:
>
>===
>Archive at http://www.open.com.au/archives/radiator/
>Announcements on radiator-announce at open.com.au
>To unsubscribe, email 'majordomo at open.com.au' with
>'unsubscribe radiator' in the body of the message.
--
NB: I am travelling this week, so there may be delays in our correspondence.
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list