(RADIATOR) Reply Attribute

[Gionata Lamia]

Hi all,
I've some different types of users, the difference between the types of users is
into the replay attributes. In this moment I've configured different "<AuthBy
RADMIN>" one for every types of users, the only differences are the replay
attributes.
The problem is that in this way I've got a large and extended file radius.cfg.
Is there way to reduce the configuration files ?
For example :

<AuthBy RADMIN>
        Identifier Default
        DBSource        dbi:mysql:radmin:localhost
        DBUsername      radius
        DBAuth          radiator

        AccountingTable RADUSAGE
        AcctColumnDef   USERNAME,User-Name
        AcctColumnDef   TIME_STAMP,Timestamp,integer
        AcctColumnDef   ACCTSTATUSTYPE,Acct-Status-Type,integer
        AcctColumnDef   ACCTDELAYTIME,Acct-Delay-Time,integer
        AcctColumnDef   ACCTINPUTOCTETS,Acct-Input-Octets,integer
        AcctColumnDef   ACCTOUTPUTOCTETS,Acct-Output-Octets,integer
        AcctColumnDef   ACCTSESSIONID,Acct-Session-Id
        AcctColumnDef   ACCTSESSIONTIME,Acct-Session-Time,integer
        AcctColumnDef   ACCTTERMINATECAUSE,Acct-Terminate-Cause,integer
        AcctColumnDef   FRAMEDIPADDRESS,Framed-IP-Address
        AcctColumnDef   NASIDENTIFIER,NAS-Identifier
        AcctColumnDef   NASIDENTIFIER,NAS-IP-Address
        AcctColumnDef   NASPORT,NAS-Port,integer
        AcctColumnDef   DNIS,Called-Station-Id
        AcctColumnDef   CALLINGSTATIONID,Calling-Station-Id
        AcctColumnDef   CALLEDSTATIONID,Called-Station-Id
        AcctColumnDef   CLIENTE,RADUSERS.CLIENTE
        AcctColumnDef   NUMERO_VERDE,RADUSERS.NUMERO_VERDE
        AcctSQLStatement update RADUSERS set \
                TIMELEFT=TIMELEFT-0%{Acct-Session-Time}, \
                OCTETSINLEFT=OCTETSINLEFT-0%{Acct-Input-Octets}, \
                OCTETSOUTLEFT=OCTETSOUTLEFT-0%{Acct-Output-Octets} where
USERNAME='%n'

        AddToReply Service-Type=2, \
                Framed-Protocol = PPP,\
                Framed-IP-Netmask = 255.255.255.255,\
                Framed-Routing = None,\
                Framed-MTU = 1500,\
                Framed-Compression = Van-Jacobson-TCP-IP
</AuthBy>

<AuthBy RADMIN>
        Identifier Callback
        DBSource        dbi:mysql:radmin:localhost
        DBUsername      radius
        DBAuth          radiator

        AccountingTable RADUSAGE
        AcctColumnDef   USERNAME,User-Name
        AcctColumnDef   TIME_STAMP,Timestamp,integer
        AcctColumnDef   ACCTSTATUSTYPE,Acct-Status-Type,integer
        AcctColumnDef   ACCTDELAYTIME,Acct-Delay-Time,integer
        AcctColumnDef   ACCTINPUTOCTETS,Acct-Input-Octets,integer
        AcctColumnDef   ACCTOUTPUTOCTETS,Acct-Output-Octets,integer
        AcctColumnDef   ACCTSESSIONID,Acct-Session-Id
        AcctColumnDef   ACCTSESSIONTIME,Acct-Session-Time,integer
        AcctColumnDef   ACCTTERMINATECAUSE,Acct-Terminate-Cause,integer
        AcctColumnDef   FRAMEDIPADDRESS,Framed-IP-Address
        AcctColumnDef   NASIDENTIFIER,NAS-Identifier
        AcctColumnDef   NASIDENTIFIER,NAS-IP-Address
        AcctColumnDef   NASPORT,NAS-Port,integer
        AcctColumnDef   DNIS,Called-Station-Id
        AcctColumnDef   CALLINGSTATIONID,Calling-Station-Id
        AcctColumnDef   CALLEDSTATIONID,Called-Station-Id
        AcctColumnDef   CLIENTE,RADUSERS.CLIENTE
        AcctColumnDef   NUMERO_VERDE,RADUSERS.NUMERO_VERDE

        AcctSQLStatement update RADUSERS set \
        TIMELEFT=TIMELEFT-0%{Acct-Session-Time}, \
        OCTETSINLEFT=OCTETSINLEFT-0%{Acct-Input-Octets}, \
        OCTETSOUTLEFT=OCTETSOUTLEFT-0%{Acct-Output-Octets} where USERNAME='%n'

        AddToReply Service-Type=2,\
                cisco-avpair = "lcp:callback-dialstring=",\
                Framed-IP-Netmask = 255.255.255.255,\
                Framed-Protocol = PPP,\
                Framed-Routing = None,\
                Framed-MTU = 1500,\
                Framed-Compression = Van-Jacobson-TCP-IP
</AuthBy>

the "AcctColumnDef" row are duplicate in both types of users, the best solution
should be that the "AcctColumnDef" is put once int the file, but I don't know if
 it is
possible and how.


Regards

Gionata Lamia

Networking Services/Systems Integrations
T-Systems Italia - debis IT Services Italia S.p.A.
Strada 2 Palazzo D
20090 - Assago - MI
Phone: +39 02 89248240
Fax: +39 02 89248231
Mobile: +39 348 4521210
e-mail: Gionata.Lamia at T-Systems.it
Internet: http://www.T-Systems.it




Gionata Lamia

Networking Services/Systems Integrations
T-Systems Italia - debis IT Services Italia S.p.A.
Strada 2 Palazzo D
20090 - Assago - MI
Phone: +39 02 89248240
Fax: +39 02 89248231
Mobile: +39 348 4521210
e-mail: Gionata.Lamia at T-Systems.it
Internet: http://www.T-Systems.it


===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.