(RADIATOR) 128k isdn dialup
Hugh Irvine
hugh at open.com.au
Tue Jun 19 07:57:00 CDT 2001
Hello Chris -
Thanks for the files, unfortunately you have sent me an extract from
the accounting detail file, not the debug trace from the logfile. As
mentioned previously, I will need to see a trace 4 debug showing the
access requests for both channels.
thanks
Hugh
At 1:24 PM +0000 6/19/01, Chris Rockett wrote:
>Hi,
>
>Here are the things that u asked for, many thanks for the quick response
>and sorry about the state of the config file :)
>
>
>************* radius.cfg ***********************************
>
># radius.cfg
>#
># Configuration file for radius server
>
>
># LogStdout makes all log file output appear on stdout as well
># You must be running in Foreground mode for this to work
>LogStdout
>
>#normally use trace 3
>Trace 4
>
>PidFile /var/run/radiusd.pid
>AuthPort 1645
>AcctPort 1646
>
>BindAddress tweedledum
>
>#DictionaryFile %D/dictionary
>DictionaryFile %D/dictionary.acc
>
># There are a number of other optional configuration items
># for optional NAS communications. See the reference manual.
># you only need these if you specify Simultaneous-Use and
># a specific NasType in a <Client> statement
># FingerProg defaults to an internal client. If you specify
># a program name for FingerProg, it wil luse that program instead
># of the internal client.
>#FingerProg /bin/finger
>#SnmpgetProg /usr/bin/snmpget
>#PmwhoProg /usr/local/sbin/pmwho
>
>#LivingstonMIB .iso.org.dod.internet.private.enterprises.307
>#LivingstonOffs 29
>#LivingstonHole 2
>SnmpgetProg /usr/local/bin/snmpget
>
><Client **nas-ip-removed**>
> Secret **removed**
> NasType Tigris
>
></Client>
>
><Client **hostmachine-ip-removed**>
> Secret **removed**
></Client>
>#UUNet radius proxies
>
>#danproxy200.dan.uu.net
><Client 195.129.12.2>
>
># danproxy201.dan.uu.net toll210.dan.uu.net
>danproxy201.dan.uu.net
> IdenticalClients 195.129.12.34 195.129.12.42
>195.129.12.50
> Secret **removed**
> DupInterval 60
>
> DefaultRealm argonet
></Client>
>
>
># 0820 number
>
><Handler
>Realm=education.navaho.net,Time="Wk0800-1800",Called-Station-Id=08208420000>
> RewriteUsername s/^([^@]+).*/$1/
> PasswordLogFileName %L/passwordlog
> AcctLogFileName %L/accounting
>
> <AuthBy LDAP>
> HoldServerConnection
>
># auth should have another user
> AuthDN cn=admin,dc=navaho,dc=net
> AuthPassword lnflashd
>
> BaseDN dc=education,dc=navaho,dc=net
> UsernameAttr uid
> PasswordAttr userpassword
> AuthAttrDef iphostnumber,Framed-IP-Address,reply
>
> AddToReply Service-Type = Framed,\
> Framed-Protocol = PPP,\
> Framed-MTU = 1500,\
> Framed-Compression = Van-Jacobson-TCP-IP,\
> Session-Timeout="until 1800"
> </AuthBy>
></Handler>
>
># not 0820 number....
><Handler Realm=education.navaho.net,Called-Station-Id=179700>
> RewriteUsername s/^([^@]+).*/$1/
> PasswordLogFileName %L/passwordlog
> AcctLogFileName %L/accounting
>
> <AuthBy LDAP>
> HoldServerConnection
>
># auth should have another user
> AuthDN cn=admin,dc=navaho,dc=net
> AuthPassword lnflashd
>
> BaseDN dc=education,dc=navaho,dc=net
> UsernameAttr uid
> PasswordAttr userpassword
> AuthAttrDef iphostnumber,Framed-IP-Address,reply
>
> AddToReply Service-Type = Framed,\
> Framed-Protocol = PPP,\
> Framed-MTU = 1500,\
># Framed-Compression = Van-Jacobson-TCP-IP,\
> Idle-Timeout = 300,\
># Port-Limit = 1
> Simultaneous-Use = 2
># Session-Timeout="until 0800"
> </AuthBy>
></Handler>
>
># UUNet ISP backup
>
><Handler Realm=argonet>
> RewriteUsername tr/A-Z/a-z/
> RewriteUsername s/^ukarg\/(.*)@.*$/$1/
> PasswordLogFileName %L/argonet-passwordlog
>
> <AuthBy FILE>
> Filename %D/argonet-users
> Dynamic USR-IP-Input-Filter
> UseAddressHint
> AddToReply Service-Type = Framed-User,\
> Framed-Protocol = PPP,\
> Framed-Routing = None,\
> Framed-MTU = 1500,\
> Framed-Compression = None,\
> Reply-Message="Protocol:"
> </AuthBy>
></handler>
>
><Handler>
> PasswordLogFileName %L/dev-passwordlog
>
> <AuthBy FILE>
> Filename %D/users
>
> AddToReply Service-Type = Framed,\
> Framed-Protocol = PPP,\
> Framed-MTU = 1500
> </AuthBy>
></handler>
>
>************ Log Excert showing the two dialed up channels ************
>
>Tue Jun 19 10:47:45 2001
> User-Name = "testuser"
> NAS-Port = 5
> NAS-Port-Type = ISDN-Synchronous
> Acc-Request-Type = User-Accounting
> Service-Type = Framed
> Framed-Protocol = PPP
> Called-Station-Id = "179700"
> Calling-Station-Id = "1243776030"
> NAS-Identifier = "08:00:03:04:06:BC"
> Acct-Status-Type = Stop
> Acct-Delay-Time = 0
> Acct-Session-Id = "010619.105231.010789"
> Acc-Dial-Port-Index = 203
> Connect-Info = "64000 "
> Acc-Connect-Tx-Speed = 64000
> Acc-Connect-Rx-Speed = 64000
> Acct-Multi-Session-Id = "010619.105136.010787"
> Acct-Link-Count = 3
> Acct-Authentic = RADIUS
> Acc-Service-Profile = "tigris"
> Acct-Session-Time = 361
> Acct-Input-Octets = 29716
> Acct-Output-Octets = 536
> Acct-Input-Packets = 483
> Acct-Output-Packets = 41
> Acc-Input-Errors = 0
> Acc-Output-Errors = 0
> Acct-Termination-Cause = User-Request
> Acc-Reason-Code = Requested-By-User
> Framed-IP-Address = 213.161.67.223
> Idle-Timeout = 300
> Framed-MTU = 1500
> Timestamp = 992944065
>
>Tue Jun 19 10:47:46 2001
> User-Name = "testuser"
> NAS-Port = 6
> NAS-Port-Type = ISDN-Synchronous
> Acc-Request-Type = User-Accounting
> Service-Type = Framed
> Framed-Protocol = PPP
> Called-Station-Id = "179700"
> Calling-Station-Id = "1243776030"
> NAS-Identifier = "08:00:03:04:06:BC"
> Acct-Status-Type = Stop
> Acct-Delay-Time = 0
> Acct-Session-Id = "010619.105137.010788"
> Acc-Dial-Port-Index = 204
> Connect-Info = "64000 "
> Acc-Connect-Tx-Speed = 64000
> Acc-Connect-Rx-Speed = 64000
> Acct-Multi-Session-Id = "010619.105136.010787"
> Acct-Link-Count = 3
> Acct-Authentic = RADIUS
> Acc-Service-Profile = "tigris"
> Acct-Session-Time = 415
> Acct-Input-Octets = 35198
> Acct-Output-Octets = 1304878
> Acct-Input-Packets = 560
> Acct-Output-Packets = 1031
> Acc-Input-Errors = 0
> Acc-Output-Errors = 0
> Acct-Termination-Cause = User-Request
> Acc-Reason-Code = Requested-By-User
> Framed-IP-Address = 213.161.67.223
> Idle-Timeout = 300
> Framed-MTU = 1500
> Timestamp = 992944066
>
>
>The ISDN TA is a BT speedway which is a rebadged AVM berliner USB
>TA. AFAIK the adaptor itself has MPPP capabilities under standard
>win98/2k os .
>
>Many thanks for your help in all this.
>
>Cheers,
>Chris Rockett,
>Systems Engineer. Freedom 2 Limited, http://www.freedom2.com
>
>
>
>On Tue, 19 Jun 2001, Hugh Irvine wrote:
>
>>
>> Hello Chris -
>>
>> Thanks for the information.
>>
>> I am not sure whether the problem is with the PC, the NAS, or with
>> Radiator. I can help you with the Radiator part if you send me a copy
>> of the Radiator configuration file (no secrets) together with a trace
>> 4 debug from Radiator showing what happens with the first channel as
>> well as the second channel.
> >
>> For the PC and the NAS, you will have to check with the vendor of the
>> ISDN card (ie. does it support MPPP? and if so how?).
>>
>> cheers
>>
>> Hugh
>>
>>
>> At 12:27 PM +0000 6/19/01, Chris Rockett wrote:
>> >Hi,
>> >
>> >The original company name is Argonet/Argo interactive/VTI limites/Vertical
>> >Twist Interactive. It should be one of those but unfortunatley I cant lay
>> >my hands on the radiator licence atm so I cant be more definate about
>> >which one it is.
>> >
>> >Cheers,
>> >Chris Rockett,
>> >Systems Engineer. Freedom 2 Limited, http://www.freedom2.com
>> >
>> >
>> >On Tue, 19 Jun 2001, Hugh Irvine wrote:
>> >
>> >>
>> >> Hello Chris -
>> >>
>> >> As I can't find you in our customer database, could you please send
>> >> me the name of the registered company that purchased this copy of
>> >> Radiator?
>> >>
>> >> Please reply to me directly.
>> >>
>> >> regards
>> >>
>> >> Hugh
>> >>
>> >>
>> >> At 11:38 AM +0000 6/19/01, Chris Rockett wrote:
>> >> >Hi,
>> >> >
>> >> >Im a bit of a newbie at radiator configuration. I have
>>radiator running
>> >> >and authenticating correctly for 64k isdn but cant seem to get a bonded
>> >> >channel for 128k isdn. Using win2k the dialup works and auths but only
>> >> >works at 64k still, any ideas of where to look for
>>information or what the
>> >> >possible cause could be?
>> >> >
>> >> >Many Thanks.
>> >> >Chris Rockett.
>> >> >
>> >> >===
>> >> >Archive at http://www.open.com.au/archives/radiator/
>> >> >Announcements on radiator-announce at open.com.au
>> >> >To unsubscribe, email 'majordomo at open.com.au' with
>> >> >'unsubscribe radiator' in the body of the message.
>> >>
>> >>
>>
>>
>
>===
>Archive at http://www.open.com.au/archives/radiator/
>Announcements on radiator-announce at open.com.au
>To unsubscribe, email 'majordomo at open.com.au' with
>'unsubscribe radiator' in the body of the message.
--
NB: I am travelling this week, so there may be delays in our correspondence.
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list