(RADIATOR) <Log Syslog> not working on HPUX 11i =/

[Jon Nistor]

by default HPUX uses syslogd -D (Prevent the kernel from directly printing
its messages on the system console.).   I've tried with -r, syslog by
itself, you name the combination, I can't figure out why it wouldn't be
doing it =/

its an HPUX 11i, Lclass PA2.0RISC box (800 series).


On Fri, 13 Jul 2001, Hugh Irvine wrote:

:::
:::Hello John, Hello Chris -
:::
:::What platform are you running on? Note that some syslog systems need to be
:::run with the -r flag.
:::
:::>From http://www.open.com.au/radiator/faq.html#66:
:::
:::Recent versions of Linux syslogd do not by default listen to the UDP port
:::that the Perl Sys::Syslog module uses. In order to let Radiator and other
:::Perl sysloggers work, you need to restart syslogd with the -r flag.
:::
:::Check the documentation for syslogd on your system.
:::
:::hth
:::
:::Hugh
:::
:::
:::On Friday 13 July 2001 07:59, Jon Nistor wrote:
:::> [nistor at outpost2] /opt/radiator/bin: ./radiusd -v
:::>
:::>
:::> This is Radiator 2.18 on outpost2
:::>
:::> Copyright Open System Consultants
:::>
:::> http://www.open.com.au/radiator
:::>
:::> On Thu, 12 Jul 2001, Chris M wrote:
:::> :::Is this 2.18.2?  If so, I think I am having the same or similar issues.
:::> :::
:::> :::Chris
:::> :::
:::> :::> From: Jon Nistor <nistor at primus.ca>
:::> :::> Date: Thu, 12 Jul 2001 17:36:01 -0400 (EDT)
:::> :::> To: <radiator at open.com.au>
:::> :::> Subject: (RADIATOR) <Log Syslog> not working on HPUX 11i =/
:::> :::>
:::> :::> Hey all,
:::> :::>
:::> :::> I've checked through the mail archives, and tried everything listed,
:::> :::> but I still can't get syslog to work for the life of me =/
:::> :::>
:::> :::> This is whats in the config:
:::> :::> <Log SYSLOG>
:::> :::> Facility    INFO
:::> :::> Trace       4
:::> :::> </Log>
:::> :::>
:::> :::> I've tried DEBUG, LOG_DEBUG, LOG_INFO, etcetcetc.  There is a
:::> :::> syslog.ph file, /opt/perl5/lib/site_perl/5.6.0/PA-RISC2.0/syslog.ph.
:::> :::>
:::> :::> Nothing comes through on syslog, when I test it out using Sys::Syslog,
:::> :::>
:::> :::> <start>
:::> :::> #!/opt/perl5/bin/perl
:::> :::> use Sys::Syslog;
:::> :::> openlog($ident,$logopt,$facility);
:::> :::> syslog('info', 'this is another test');
:::> :::> syslog('mail', 'this is a better test: %d', time);
:::> :::> closelog();
:::> :::> syslog('debug', 'this is the last test');
:::> :::>
:::> :::> <end>
:::> :::>
:::> :::> All that works fine ..  Anyone have any insight? =/
:::> :::>
:::> :::>
:::> :::> --
:::> :::> ..+.+.=.....+.....*..-...\//...-..+..._+($)(_)#
:::> :::> ......%%@......[]@#.....! Jon (nistor at primus.ca)     Unix Systems
:::> :::> Administrator, Primus Canada. Tel.  (416) 207-7612
:::> :::> emerg/afterhour: pagenistor at primus.ca. cell. (416) 294-7780
:::> :::> Internet Services Group
:::> :::> ..EOF
:::> :::>
:::> :::> ===
:::> :::> Archive at http://www.open.com.au/archives/radiator/
:::> :::> Announcements on radiator-announce at open.com.au
:::> :::> To unsubscribe, email 'majordomo at open.com.au' with
:::> :::> 'unsubscribe radiator' in the body of the message.
:::
:::

-- 
.+.+.=.....+.....*..-...\//...-..+..._+($)(_)# ......%%@......[]@#.....!
Jon (nistor at primus.ca)     Unix Systems Administrator, Primus Canada.
Tel.  (416) 207-7612       emerg/afterhour: pagenistor at primus.ca.
cell. (416) 294-7780       Internet Services Group
.EOF

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.