[RADIATOR] radiator never gets to the 2nd authentication phase in PEAP - MSCHAPv2

[Hugo Veiga]

Hi,


Heikki I bow to you. :)


So the problem was this:

(Topology)

Radiator Machine/ IP: 10.253.1.12/24
--------------Router--------------wireless switch/IP:10.240.1.1/24

- The radiator machine receives requests from wireless switch.

- Wireless switch never receives the answer.

:: So Radiator machine is a virtual machine and installed by a
colleague of mine (system admin) that inserted the mask 255.0.0.0 in
the network mask. Radiator machine with the supplied mask will try to
contact 10.240.1.1 through arp discovery and will never find it
because it's on a different broadcast domain. The solution was
obvious, insert the correct netmask and it started to work perfectly.


Problem solved.

Many thanks Heikki,

Hugo Veiga




>* Code:       Access-Request
*>* Identifier: 180
*>* Authentic:  <139><3>(<143><10><139>N<158><F<172><194><163><168><135>O
*
Radiator notices this and retransmits its previous reply

>* Tue Jan 26 15:54:57 2016: INFO: Duplicate request id 180 received from
*>* 10.240.1.1(20004): retransmit reply
*>* Tue Jan 26 15:54:57 2016: DEBUG: Packet dump:
*>* *** Sending to 10.240.1.1 port 20004 ....
*
There are multiple retransmits back and forth and the authentication
does not proceed.

I would check the Wi-Fi controller logs and make sure it is receiving

the responses from Radiator.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20160201/a00a7a0d/attachment.html