[RADIATOR] TTLS/EAP setup

[Heikki Vatiainen]

On 24.12.2016 00:37, rohan.henry cwjamaica.com wrote:

> Logs from another platform show EAP-Type=TTLS.

Check that the configuration file has, or at least starts with: 'EAPType 
TTLS'. This will tell Radiator to start with EAP-TTLS when the client 
starts authentication.

> But I suspect that the NAS is not seeing the responses from Radius and therefore resending the access-request.

If the above configuration change does not work, then you need to check 
NAS logs to see if there's any hint about what's going on. The EAPType 
change should not affect whether the NAS sees the responses or not, 
unless it, or some other devices on the path, does some type of 
filtering based on the responses.

> This is my first time working on this kind of Radius setup so the help is appreciated.

The start of WiMAX authentication is the same as with other TLS based 
EAp methods. The client and Radiator establish a TLS tunnel but now it 
seems that this is not starting up correctly.

Thanks,
Heikki

-- 
Heikki Vatiainen
hvn at open.com.au