[RADIATOR] Custom AuthBy Identifier not being picked up

[Heikki Vatiainen]

On 05/21/2013 02:50 PM, Tim Jones wrote:

> I am creating a custom AuthBy and made a copy of the provided
> AuthTEST.pm module following the documentation.
> 
> The module gets imported & loaded when radiator restarts, but if I try
> to assign it an identifier I get error messages saying it can't be
> found,e.g.

You have a typo in the config file:
>     Identifer test_mod

Identifier is missing an i.

When you put the AuthBy in the group and the Handler has 'AuthBy group',
your AuthBy will be accessed through the group and the misspelled
Identifier does not matter. If you fix the typo you do not need to use
the group.

There's probably an error somewhere in the messages too:
ERR: Unknown keyword 'Identifer'

Thanks,
Heikki

> ----------------------------------------------------------------------------------------
> <AuthBy FILE>
>     Identifier users_file
> </AuthBy>
> 
> <AuthBy MYMODULE>
>     Identifer test_mod
> </AuthBy>
> 
> <AuthBy GROUP>
>     Identifier group
>     AuthByPolicy ContinueWhileAccept
>     AuthBy test_mod
>     AuthBy users_file
> </AuthBy>
> 
> <Handler>
>     Identifier default
>     AuthBy group
> </Handler>
> ----------------------------------------------------------------------------------------
> Tue May 21 12:40:21 2013 541542: DEBUG: AuthMYMODULE loaded
> Tue May 21 12:40:21 2013 542564: WARNING: Could not find AuthBy clause
> with Identifier test_mod
> Tue May 21 12:40:21 2013 545893: DEBUG: Finished reading configuration
> file '/etc/radiator/simple-rad.cfg'
> Tue May 21 12:40:23 2013 090787: DEBUG: Reading dictionary file
> '/etc/radiator/simple/dictionary'
> Tue May 21 12:40:27 2013 501376: DEBUG: Creating authentication port
> 0.0.0.0:1645 <http://0.0.0.0:1645>
> Tue May 21 12:40:27 2013 501648: DEBUG: Creating accounting port
> 0.0.0.0:1646 <http://0.0.0.0:1646>
> Tue May 21 12:40:27 2013 501809: NOTICE: Server started: Radiator 4.11
> on VM-RADMOD
> ----------------------------------------------------------------------------------------
> 
> But when I put the AuthBy clause directly into the AuthBy GROUP, it
> works just fine:
> 
> ----------------------------------------------------------------------------------------
> <AuthBy FILE>
>     Identifier users_file
> </AuthBy>
> 
> <AuthBy GROUP>
>     Identifier group
>     AuthByPolicy ContinueWhileAccept
>     <AuthBy MYMODULE>
>          Identifer test_mod
>     </AuthBy>
>     AuthBy users_file
> </AuthBy>
> 
> <Handler>
>     Identifier default
>     AuthBy group
> </Handler>
> ----------------------------------------------------------------------------------------
> Tue May 21 12:39:49 2013 694468: DEBUG: Handling request with Handler
> '', Identifier 'default'
> Tue May 21 12:39:49 2013 694675: DEBUG:  Deleting session for test,
> 203.63.154.1, 1234
> Tue May 21 12:39:49 2013 694806: DEBUG: Handling with Radius::AuthGROUP:
> group
> Tue May 21 12:39:49 2013 694938: INFO: AuthMYMODULE handle_request:
> Received from 127.0.0.1 port 49037
> Tue May 21 12:39:49 2013 695061: DEBUG: Radius::AuthGROUP:group  result:
> ACCEPT, 
> Tue May 21 12:39:49 2013 695190: DEBUG: Handling with Radius::AuthFILE:
> users_file
> Tue May 21 12:39:49 2013 695372: DEBUG: Reading users file
> /etc/radiator/simple/users
> Tue May 21 12:39:49 2013 695594: DEBUG: Radius::AuthFILE looks for match
> with test [test]
> Tue May 21 12:39:49 2013 695864: DEBUG: Radius::AuthFILE ACCEPT: : test
> [test]
> Tue May 21 12:39:49 2013 696022: DEBUG: Radius::AuthGROUP:group
> users_file result: ACCEPT, 
> Tue May 21 12:39:49 2013 696314: DEBUG: AuthBy GROUP result: ACCEPT, 
> Tue May 21 12:39:49 2013 696461: DEBUG: Access accepted for test
> 
> 
> Any help & suggestions would be appreciated,
> 
> Many thanks & regards,
> 
> Tim Jones
> /Technology & Quality
> /
> **
> ** 
> tim.jones at fon.com <mailto:tim.jones at fon.com>
> Skype: Tim.Jones.Fon
>  
> C/ Quintanavides 15. Edificio 2, Planta 1ª
> Parque Empresarial Vía Norte, de Metrovacesa
> 28050 Las Tablas. Madrid
> 
> 
> _______________________________________________
> radiator mailing list
> radiator at open.com.au
> http://www.open.com.au/mailman/listinfo/radiator
> 


-- 
Heikki Vatiainen <hvn at open.com.au>

Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
NetWare etc.