[RADIATOR] Radiator does not wait for RADIUS requests

[Qiu, Dennis]

Sorry, That is the only change I make.

The server IP matches BindAddress IP. See following ipconfig output.

C:\Perl\bin>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 144.211.2.97
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 144.211.2.248


I also notice radiusd is listening to the port 1812 and 1813.
C:\Program Files\Radiator>netstat -an | grep 18
  UDP    0.0.0.0:57183          *:*
  UDP    127.0.0.1:57185        *:*
  UDP    144.211.2.97:1812      *:*
  UDP    [::]:57184             *:*

C:\Program Files\Radiator>



For some unknown reason, radpwtst cannot connect to radiusd.

From: Alan Buxey [mailto:A.L.M.Buxey at lboro.ac.uk]
Sent: Tuesday, November 06, 2012 12:15 PM
To: Qiu, Dennis; radiator at open.com.au
Subject: Re: [RADIATOR] Radiator does not wait for RADIUS requests

Without ANY changes? Unless your server has the IP address that's the same as the config file you used...then that won't work.

The default config is a starting point , a basic block to build/construct from.

alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20121106/48088c14/attachment.html