[RADIATOR] FW: doubt on Radiator Radius Authentication server

Wed May 2 02:37:00 CDT 2012

Since I got an error stating "Is being held until the list moderator can review it for approval", so iam resending the email so that I can get faster response.

Thanks,
Santhosh

From: radiator-bounces at open.com.au [mailto:radiator-bounces at open.com.au] On Behalf Of Santhosh Katta
Sent: Monday, April 30, 2012 6:46 PM
To: Neil Quiogue
Cc: radiator at open.com.au
Subject: Re: [RADIATOR] doubt on Radiator Radius Authentication server

Hi Neil,
Thanks for your response.

I have followed the steps in http://www.open.com.au/radiator/install.html document for installation on Windows 7 PC and installation went well and even installed 'ppm install win32-daemon' on the Windows 7 PC.

I have changed the configuration in radius.cfg, but still I get issue as

To extend your license period, contact admin at open.com.au<mailto:admin at open.com.au>

Mon Apr 30 18:29:08 2012: DEBUG: Reading dictionary file './dictionary'

Mon Apr 30 18:29:08 2012: ERR: Could not open dictionary file './dictionary': No

such file or directory

Mon Apr 30 18:29:08 2012: DEBUG: Creating authentication port 0.0.0.0:1645

Mon Apr 30 18:29:08 2012: ERR: Could not bind authentication socket: Only one us

age of each socket address (protocol/network address/port) is normally permitted

.

Mon Apr 30 18:29:08 2012: DEBUG: Creating accounting port 0.0.0.0:1646

Mon Apr 30 18:29:08 2012: ERR: Could not bind accounting socket: Only one usage

of each socket address (protocol/network address/port) is normally permitted.

Mon Apr 30 18:29:08 2012: NOTICE: Server started: Radiator 4.9 on BL10408A (LOCK

ED)

Iam sure installation every thing is fine. I have attached the radius.cfg file which is configured in "C:\Program Files\Radiator". Can you please go through and check where is the issue.
I will Explain you what iam looking out, so that you can help me in changing the appropriate configuration on the radius.cfg file.
I want the my client to authenticate(either with PEAP/TLS/EAP-FAST) with Radiator Authentication server. For that I have Cisco AP with IP address 10.99.168.64 and the shared secret I have given is "radiator".  I want the authentication port to be configured to 1812.
Can you please help in configuring radius.cfg file.  Should I do any changes in dictionary file which is in "C:\Program Files\Radiator" location
Iam following the reference guide which I have downloaded and following the document, but still iam unable to do it.
Thanks for your help.

Regards,
Santhosh

From: Neil Quiogue [mailto:neil at quiogue.com]
Sent: Saturday, April 28, 2012 12:35 PM
To: Santhosh Katta
Cc: radiator at open.com.au
Subject: Re: [RADIATOR] doubt on Radiator Radius Authentication server

Hello Santhosh,

Did you go through the installation document specifically the Windows section at http://www.open.com.au/radiator/install.html ?

There is also reference there on where to go to for the configuration.

For your #1 and #2, it is normally the radius.cfg file and located under Program Files\Radiator if you went through the instructions.

And then when running it as a service though you need to have Win32::Daemon (installed as 'ppm install win32-daemon' if using ActiveState Perl).  Some instructions are on Reference Manual 3.6.1

Once that is installed, it's just a matter of running 'perl c:\perl\bin\radiusd -installservice'.

And radpwtst is just a tool for testing RADIUS as it acts like a client.  It is found either in the c:\perl\bin directory or in the installation directory (where you unzipped it).

Regards,

Neil

Friday, April 27, 2012, 2:02:51 PM, you wrote:

Hi All,

I have installed Radiator radius on Windows 7 laptop and installation went well. But I am not getting how to configure and run Radiator for PEAP, TLS....etc authentication. I went through the document, but unable to follow on how to add Authentication port, Authentication type, Radius Client.

When  I give "perl radiusd" command, then below output I get

Legacy library timelocal.pl will be removed from the Perl core distribution in t

he next major release. Please install it from the CPAN distribution Perl4::CoreL

ibs. It is being used at (eval 8), line 27.

Legacy library newgetopt.pl will be removed from the Perl core distribution in t

he next major release. Please install it from the CPAN distribution Perl4::CoreL

ibs. It is being used at (eval 8), line 28.

Fri Apr 27 15:07:12 2012: DEBUG: Finished reading configuration file 'C:\Program

Files\Radiator\radius.cfg'

This Radiator license will expire on 2012-08-01

This Radiator license will stop operating after 1000 requests

To purchase an unlimited full source version of Radiator, see

http://www.open.com.au/ordering.html

To extend your license period, contact admin at open.com.au<mailto:admin at open.com.au>

Fri Apr 27 15:07:12 2012: DEBUG: Reading dictionary file './dictionary'

Fri Apr 27 15:07:12 2012: ERR: Could not open dictionary file './dictionary': No

such file or directory

Fri Apr 27 15:07:12 2012: DEBUG: Creating authentication port 0.0.0.0:1645

Fri Apr 27 15:07:12 2012: DEBUG: Creating accounting port 0.0.0.0:1646

Fri Apr 27 15:07:12 2012: NOTICE: Server started: Radiator 4.9 on BL10408A (LOCK

ED)

I have below queries:

1.       In which file should I configure Authentication Port, Authentication type, shared secret.

2.       In Which file I should configure Radius Client.

3.       Once I configure, the above info, how to run the file

4.       What is "radpwtst" and what is the use of "radpwtst".

Iam stuck in the basic on how to run and configure Radiator. Please help me.

Regards,

Santhosh

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20120502/054343bb/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: radius.cfg
Type: application/octet-stream
Size: 10426 bytes
Desc: radius.cfg
Url : http://www.open.com.au/pipermail/radiator/attachments/20120502/054343bb/attachment-0001.obj 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT00001..txt
Url: http://www.open.com.au/pipermail/radiator/attachments/20120502/054343bb/attachment-0001.txt 