[RADIATOR] EAP Nak desires type 26

[Aman Arneja]

An EAP NAK is usually issued by the Client Side when the server initiates
the connection with a method and the client is not configured from it. In
the NAK the client sends the EAP Method type it supports/is configured for.
>From the Log snipped it seems that the client is setup for EAPMsChapv2
instead of PEAP Eap-MsChapv2


On Mon, Mar 26, 2012 at 3:33 PM, Richard Dunne <richard.dunne at dit.ie> wrote:

> I found this on a cisco book ****
>
> ** **
>
> VALUE   EAP-Type                       MS-EAP-Authentication  26****
>
> ** **
>
> ** **
>
> Now the problem is I use ms-chap v2 and it works fine. So why am I seeing
> this message ****
>
> ** **
>
> Thanks for any ideas****
>
> ** **
>
> Richard****
>
> *From:* radiator-bounces at open.com.au [mailto:radiator-bounces at open.com.au]
> *On Behalf Of *Richard Dunne
> *Sent:* 26 March 2012 10:55
> *To:* radiator at open.com.au
> *Subject:* [RADIATOR] EAP Nak desires type 26****
>
> ** **
>
> Hello all ****
>
> ** **
>
> I use a PEAP ,MSCHAPV2 auth set up , going to an AD server. I will send on
> config file if needed , but hopefully it’s a simple fix****
>
> ** **
>
> I get the error *EAP Nak desires type 26. *From Google and everything
> else I don’t get much. Can anyone send me on my way, ****
>
>
> Regards ****
>
> ** **
>
> Richard Dunne ****
>
> DIT.IE****
>
>
> This message has been scanned for content and viruses by the DIT
> Information Services E-Mail Scanning Service, and is believed to be clean.
> http://www.dit.ie ****
>
> This message has been scanned for content and viruses by the DIT
> Information Services E-Mail Scanning Service, and is believed to be clean.
> http://www.dit.ie
>
> _______________________________________________
> radiator mailing list
> radiator at open.com.au
> http://www.open.com.au/mailman/listinfo/radiator
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20120326/b583fb20/attachment.html