[RADIATOR] Raddius Question : Acct-Interim-Interval session time not working (Want to Top-Up Session Time Online)

[Hugh Irvine]

Hello -

This is the Radiator mailing list, not the freeradius mailing list.

regards

Hugh


On 21 Feb 2012, at 14:47, Supphasak Ninjarat wrote:

> Hello all, 
> 
> Purpose : Want to Top-Up Session Time Online Login
> 
> I am using freeradius 2.1.0 on Ubuntu 10.10 and using rp-pppoe server and chillispot server for user login authentication method on same machine and set up radius attribute for end user such as 
> #------------------------------------------------------------------------------------- 
> radtest   abc   abc123   127.0.0.1  0   SecretKey
> Sending Access-Request of id 185 to 127.0.0.1 port 1812 
>         User-Name = "abc" 
>         User-Password = "abc123" 
>         NAS-IP-Address = 127.0.1.1 
>         NAS-Port = 0 
> rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, length=80 
>         Idle-Timeout = 600 
>         WISPr-Bandwidth-Max-Down = 100000000 
>         WISPr-Bandwidth-Max-Up = 100000000 
>         Acct-Interim-Interval = 60
>         Acct-Status-Type = Interim-Update 
>         Session-Timeout = 300
> 
> ( All  user can login all of session is 5mins ) 
> #------------------------------------------------------------------------------------- 
> 
> 1.After first use logged in  ( with pppoe or chillispot) the user "abc" use the network times 200secs  (left time=100secs) and logged off later. 
> 
> 2.The user "abc"  logged in again with radius message 
>         User-Name = "abc" 
>         User-Password = "abc123" 
>         NAS-IP-Address = 127.0.1.1 
>         NAS-Port = 0 
> rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, length=80 
>         Idle-Timeout = 600 
>         WISPr-Bandwidth-Max-Down = 100000000 
>         WISPr-Bandwidth-Max-Up = 100000000 
>         Acct-Interim-Interval = 60  
>         Acct-Status-Type = Interim-Update 
>         Session-Timeout = 100
> 
>  During live logged in session , In the radius database and radacct table has 2 record insert (first record is first login and secondary record is now login)    
> 
>  I delete the first database record (use time= 200secs) so that the attribute Acct-Interim-Interval it is  updating  all sessiontime count to 0 and "abc" can use the network 300secs. But it is not updating session and the user "abc" was terminate after 100 secs normally  by AcctTerminateCause  is "Session-Timeout" . 
>  
>      What does debug or how? 
> 
> Thanks for every thing. 
> 
> 
> -- 
> Touch Technologies
> Mr. Supphasak Ninjarat
> 089-4595046
> _______________________________________________
> radiator mailing list
> radiator at open.com.au
> http://www.open.com.au/mailman/listinfo/radiator


--

Hugh Irvine
hugh at open.com.au

Radiator: the most portable, flexible and configurable RADIUS server 
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, 
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS, 
TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
DIAMETER etc. 
Full source on Unix, Windows, MacOSX, Solaris, VMS, NetWare etc.