[RADIATOR] Cannot install rpm file
Simon Morley
simon.morley at me.com
Mon Feb 20 17:40:57 CST 2012
How on earth can I unsubscribe from this list?
I don't think the email unsubscribe options work...
Please take me off the list.
On 21 Feb 2012, at 13:38, Jay Tuala wrote:
> Hello there Heikki,
>
> With your help I was finally able to get radiator downloaded and installed. Thanks a bunch and keep up the good work.
>
> I will now focus on configuring and testing.
>
>
> Cheers,
> Jay
>
> On Mon, Feb 20, 2012 at 10:36 PM, Heikki Vatiainen <hvn at open.com.au> wrote:
> On 02/17/2012 04:19 PM, Jay Tuala wrote:
>
> Hello Jay,
>
> > Using cat to view the downloaded RPM file shows the software license
> > agreement. the following command is what i used to download the file,
> >
> > wget --http-user=XXXXXX --http-password=XXXXXX
> > _http://www.open.com.au/radiator/demo-downloads/dl.cgi/Radiator-Locked-4.9-2.noarch.rpm_
>
> Ok, that explains what happens. Using a non-interactive tool such as
> wget may not work here because of the CGI that creates the actual
> download link.
>
> > I suspect this is where the problem lies. Would be able to point me in
> > the right direction?
>
> Try this: Use Chrome, IE, Firefox or any other browser to download the
> software to your workstation and then copy it to the target machine
> unless you can run the browser on the target machine directly.
>
> Or you could install one of elinks, links or lynx. These are test mode
> browsers that can run in the terminal. You can install one of those on
> your Radiator evaluation host and use text mode browser to access the
> download link.
>
> In any case you need to accept the license agreement before the actual
> download link becomes available.
>
> Please let us know how it goes.
>
> Thanks!
> Heikki
>
>
> > thanks again.
> >
> >
> > On Fri, Feb 17, 2012 at 11:10 PM, Heikki Vatiainen <hvn at open.com.au
> > <mailto:hvn at open.com.au>> wrote:
> >
> > On 02/17/2012 03:27 AM, Jay Tuala wrote:
> >
> > > I followed the 'RPM format for Linux' link and accepted the license
> > > agreement to download the file. After downloading the file onto the
> > > Centos, I tried the 'rpm -ivh Radiator-Locked-4.9-2.noarch.rpm'
> > command
> > > but still getting the same issue. By the way, is there any issue with
> > > running Radiator on a vm. I wouldn't think so but just wondering if I
> > > needed a seperate box for radiator?
> >
> > If you use e.g. less command or editor to view the downloaded RPM file
> > do you see HTML page or RPM binary? It still sounds like HTML file was
> > downloaded.
> >
> > Running Radiator on a virtual machine is not a problem. It's actually
> > quite common.
> >
> > Thanks!
> > Heikki
> >
> > > Many thanks,
> > > Jay #radiatornewbie :-|
> > >
> > >
> > >
> > >
> > >
> > > On Fri, Feb 17, 2012 at 1:45 PM, Heikki Vatiainen <hvn at open.com.au
> > <mailto:hvn at open.com.au>
> > > <mailto:hvn at open.com.au <mailto:hvn at open.com.au>>> wrote:
> > >
> > > On 02/15/2012 10:31 PM, Jay Tuala wrote:
> > >
> > > Hello Jay,
> > >
> > > > following the setup notes and can't seem to install Radiator
> > rpm file.
> > > > I'm a newbie to centos/radiator but am really keen to set it up
> > > and test it.
> > > >
> > > > the error i'm getting is as follows:
> > > >
> > > > [root at radiator1 ~]# rpm -ivh Radiator-Locked-4.9-2.noarch.rpm
> > > > Retrieving
> > http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd>
> > > > error: skipping
> > > http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd>
> > > > - transfer failed - Unknown or unexpected error
> > >
> > > That looks like head of HTML file from the Radiator downloads
> > section.
> > > The link titled 'RPM format for Linux' in the table listing
> > different
> > > versions gives you the download page, not the RPM. So please try
> > > downloading again.
> > >
> > > Thanks!
> > > Heikki
> > >
> > >
> > > > I have the file located below,
> > > >
> > > > [root at radiator1 ~]# ls
> > > > anaconda-ks.cfg install.log install.log.syslog
> > > > Radiator-Locked-4.9-2.noarch.rpm
> > > >
> > > >
> > > >
> > > > I would greatly appreciate any help i can get.
> > > >
> > > >
> > > > Many thanks,
> > > > J
> > > >
> > > >
> > > > _______________________________________________
> > > > radiator mailing list
> > > > radiator at open.com.au <mailto:radiator at open.com.au>
> > <mailto:radiator at open.com.au <mailto:radiator at open.com.au>>
> > > > http://www.open.com.au/mailman/listinfo/radiator
> > >
> > >
> > > --
> > > Heikki Vatiainen <hvn at open.com.au <mailto:hvn at open.com.au>
> > <mailto:hvn at open.com.au <mailto:hvn at open.com.au>>>
> > >
> > > Radiator: the most portable, flexible and configurable RADIUS
> > server
> > > anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT,
> > Emerald,
> > > Platypus, Freeside, TACACS+, PAM, external, Active Directory,
> > EAP, TLS,
> > > TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
> > > DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
> > > NetWare etc.
> > >
> > >
> >
> >
> > --
> > Heikki Vatiainen <hvn at open.com.au <mailto:hvn at open.com.au>>
> >
> > Radiator: the most portable, flexible and configurable RADIUS server
> > anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> > Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
> > TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
> > DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
> > NetWare etc.
> >
> >
>
>
> --
> Heikki Vatiainen <hvn at open.com.au>
>
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
> TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
> DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS,
> NetWare etc.
>
> _______________________________________________
> radiator mailing list
> radiator at open.com.au
> http://www.open.com.au/mailman/listinfo/radiator
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20120220/db81a4fc/attachment-0001.html
More information about the radiator
mailing list