[RADIATOR] [IPv6] Issues with Framed-Interface-Id assignment

[Elias]

Hi Heikki,

The patch works and I can successfully assign the v6 addresses correctly 
now. However, it'll not work if I try to return a simplified IP address, 
eg: 10:1:1:1.

Thu Sep 22 15:20:01 2011: DEBUG: Packet dump:
*** Received from 10.55.254.100 port 51207 ....
Code:       Access-Request
Identifier: 76
Authentic: <127>v<195>J}<2<29><143><8><163>Yv<16>=<143>
Attributes:
         User-Name = "dual_stack03 at v6"
         Service-Type = Framed-User
         NAS-IP-Address = 203.63.154.1
         NAS-Identifier = "203.63.154.1"
         NAS-Port = 1234
         Called-Station-Id = "123456789"
         Calling-Station-Id = "987654321"
         NAS-Port-Type = Async
         User-Password = 
<252><166><201>od<23><190>,<224><29><235><222><217><199><165><236>

Thu Sep 22 15:20:01 2011: DEBUG: Handling request with Handler 'Realm = 
/v6/i', Identifier ''
Thu Sep 22 15:20:01 2011: DEBUG: LimitLabConnection Deleting session for 
dual_stack03 at v6, 203.63.154.1, 1234
Thu Sep 22 15:20:01 2011: DEBUG: Handling with Radius::AuthFILE:
Thu Sep 22 15:20:01 2011: DEBUG: Reading users file 
/usr/local/etc/radius/users.conf
Thu Sep 22 15:20:01 2011: DEBUG: Radius::AuthFILE looks for match with 
dual_stack03 at v6 [dual_stack03 at v6]
Thu Sep 22 15:20:01 2011: DEBUG: Radius::AuthFILE ACCEPT: : 
dual_stack03 at v6 [dual_stack03 at v6]
Thu Sep 22 15:20:01 2011: DEBUG: AuthBy FILE result: ACCEPT,
Thu Sep 22 15:20:01 2011: DEBUG: Access accepted for dual_stack03 at v6
*Thu Sep 22 15:20:01 2011: WARNING: Failed to parse ifid: 10:1:1:1*
Thu Sep 22 15:20:01 2011: DEBUG: Packet dump:
*** Sending to 10.55.254.100 port 51207 ....
Code:       Access-Accept
Identifier: 76
Authentic: <<5><250><197><157><201>r<150><130>Pp<158><234><193>4Y
Attributes:
         Framed-IP-Address = 255.255.255.254
         Framed-IP-Netmask = 255.255.255.255
         Framed-Interface-Id = 10:1:1:1



On 09/21/2011 08:37 PM, Elias wrote:
> That's excellent news! Will test it out and tell you how it works.
>
> On 09/21/2011 04:41 PM, Heikki Vatiainen wrote:
>> On 08/25/2011 01:00 PM, Eddie Stassen wrote:
>>
>> Hello Eddie and Elias,
>>
>>>> What I'm looking for is ideas or more information what the itf ids may
>>>> look like. This would be needed to correctly pack the attribute when it
>>>> is sent to the wire.
>>>>
>>> The only ones I have seen use the un-abbreviated form i.e.
>>> %x:%x:%x:%x, but then my IPv6 experience is very limited.
>> The latest patch set for Radiator 4.8 now supports IPv6 interface id:
>>
>> 2011-09-19 dictionary Radius.pm
>>       Changed the type of Framed-Interface-Id in dictionary to be ifid.
>>       You can now specify Framed-Interface-Id as strings in the format
>>       'aaaa:bbbb:cccc:dddd', which is compatible with FreeRadius.
>>
>> If you can test this, please let us know how it works.
>>
>> Thanks!
>>
> _______________________________________________
> radiator mailing list
> radiator at open.com.au
> http://www.open.com.au/mailman/listinfo/radiator
>
> ----------------------------------------------------------------------
> This message has been scanned by TM antivirus for viruses and spyware and found to be clean.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.open.com.au/pipermail/radiator/attachments/20110922/68f7db17/attachment.html