[RADIATOR] Radiator Version 4.7 released

[JHONNY FREIRE DE OLIVEIRA]

Hi,

This is what happens if try to update with the new package:

# rpm -Uvh /root/Radiator-4.7-3.noarch.rpm
Preparing...                ########################################### [100%]
   1:Radiator               ########################################### [100%]
error: unpacking of archive failed on file /usr/lib/perl5/Radius: cpio: rename failed - Is a directory
#

Cumprimentos,
___________________________________________________________________________
Jhonny Freire de Oliveira


-----Original Message-----
From: radiator-bounces at open.com.au [mailto:radiator-bounces at open.com.au] On Behalf Of Mike McCauley
Sent: quarta-feira, 22 de Setembro de 2010 0:12
To: radiator at open.com.au
Subject: Re: [RADIATOR] Radiator Version 4.7 released

Hello Heikki,

Thanks for reporting this.

The RPM has always had version specific dirs in it with links from non-version 
specific dirs to the version specific dirs. However we have addressed some 
issues with some of the links (specifically with the symlink 
in /usr/lib/perl5/vendor_perl) which apparently  caused the problems you 
report.

New RPMS have been uploaded.

Cheers.

On Tuesday 21 September 2010 06:42:51 pm Heikki Vatiainen wrote:
> On 09/15/2010 07:49 PM, Hugh Irvine wrote:
> > New RPM now available on the web site.
>
> I just received a report that indicates there is at least one hard coded
> path that has Perl version in it. This was with the RPM packaged on
> 15.9. In short: Perl 5.8.8 is installed on RHEL 5.5 but somehow the RPM
> creates paths for 5.10.0 when installed.
>
> Can you check if the RPM could be redone once more?
>
> Thanks!
>
>
> Here is a transcript:
>
> # rpm -Uvh Radiator-4.7-2.noarch.rpm
> [ No complaints there, installation was successful]
>
> # service radiator stop
> # service radiator start
> Starting Radiator: Can't locate Radius/ServerConfig.pm in @INC
>                  (@INC contains: .
> /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi
>      /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl
>       /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi
>                  /usr/lib/perl5/vendor_perl/5.8.8
> /usr/lib/perl5/vendor_perl
>                  /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi
>                  /usr/lib/perl5/5.8.8 .) at /usr/bin/radiusd line 25.
>
>
> [ updatedb has not yet run. Use locate to see where the old version was ]
>
> # locate Radius/ServerConfig.pm
> /usr/lib/perl5/site_perl/5.8.8/Radius/ServerConfig.pm
>
>
>
> [ Now check the loaction of new version]
>
> # updatedb
> # locate Radius/ServerConfig.pm
> /usr/lib/perl5/site_perl/5.10.0/Radius/ServerConfig.pm
>
> [ 5.10.0 above seems to be the problem]
>
>
>
> # perl --version
> This is perl, v5.8.8 built for x86_64-linux-thread-multi
>
>
>
> [ Downgrade back to working version ]
>
> # yum --nogpgcheck downgrade Radiator-4.6-1.noarch.rpm



-- 
Mike McCauley                               mikem at open.com.au
Open System Consultants Pty. Ltd
9 Bulbul Place Currumbin Waters QLD 4223 Australia   http://www.open.com.au
Phone +61 7 5598-7474                       Fax   +61 7 5598-7070

Radiator: the most portable, flexible and configurable RADIUS server 
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, 
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS, 
TTLS, PEAP, TNC, WiMAX, RSA, Vasco, Yubikey, MOTP, HOTP, TOTP,
DIAMETER etc. Full source on Unix, Windows, MacOSX, Solaris, VMS, NetWare etc.
_______________________________________________
radiator mailing list
radiator at open.com.au
http://www.open.com.au/mailman/listinfo/radiator