[RADIATOR] (no subject)

[Cottrell, Charles P.]

We have 3 devices that are supposed to have the ability to do enterprise authentication via radius.  We are trying to use them as bridges.  These devices are:

Linksys WET54G
3Com WL-560
Silex SX-500

The Linksys connected via WPA only using PEAP and MSCHAP-V2, but is inconsistent.  The 3Com will connect with WPA using TTLS and PAP, but not with WPA/WPA2 and PEAP.  We must also assign a static address to the 3com bridge.  The Silex bridge will not connect via any method, and appears to have certificate issues.  However, it has no troubleshooting capabilities from the device side.

The questions we have are:


1.       Has anyone worked with any of these devices?  If so, are they configured for WPA2 Enterprise?   What version of firmware?

2.       If you tried to work with any of these devices and failed, what device did you move to that was reliable?

3.       For the Radiator crew specifically, have you worked with clients on any of these devices and have you had success in assisting with enterprise authentication?

4.       A copy of our radius.cfg file is attached.  Can you give it a look and see if there are any issues that would prevent these wireless devices from authenticating?

We do have some other wireless bridges that work fine from these manufacturers (except Silex), but they are different models.

Charles P. Cottrell
Network Engineer
Medical University of South Carolina
843.792.9938

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.open.com.au/pipermail/radiator/attachments/20080721/3647376b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cleaned_radius.cfg
Type: application/octet-stream
Size: 7650 bytes
Desc: cleaned_radius.cfg
URL: <http://www.open.com.au/pipermail/radiator/attachments/20080721/3647376b/attachment-0001.obj>