(RADIATOR) More parameters from AddressAllocator SQL to AuthBy Dynaddress?

[Toomas Kärner]

Hello Hugh,

I don't use PoolHint for anything jet. I'm just looking over the
possibilities for getting the results I need and it seemed like a nice
development to add some extra "slots" between AddressAllocator SQL and
AuthBy Dynaddress for carrying some extra parameters.
But as you said already, I can always use AuthBy Groups togethet with
AuthBy SQL to fetch these parameters later. It's just more queries where
I could do with less.

Rgds.
Toomas

Tuesday, April 22, 2008, 2:33:53 AM, you wrote:

> Hello Toomas -

> Thanks for the additional information.

> As mentioned in my previous mail, I would just use a supplementary  
> AuthBy SQL clause to use the PoolHint to get the additional  
> attributes from the additional table.

> What are you using for the PoolHint currently?

> regards

> Hugh



> On 21 Apr 2008, at 18:54, Toomas Kärner wrote:

>> Hello Hugh,
>>
>> It's a case of DHCP setup where the NAS has several IP pools and
>> together with the Framed-IP-Address I need to give default gateway
>> (dependent on the pool from which I got the address) and some other
>> VSA's that are depending on the Pool only (not the subscriber). I'd
>> use the pool-hint as the pool_id to join them from another table where
>> I would keep a set of parameters that are the same for all IP's in
>> that pool but differ from pool to pool. But that's already technical
>> after I have found a way how to pass them on.
>>
>> Rgds.
>> Toomas
>>
>> Friday, April 18, 2008, 8:50:02 AM, you wrote:
>>
>>> Hello Toomas -
>>
>>> You can't do this directly with the current code, but you can use a
>>> supplementary AuthBy SQL to do whatever you need to.
>>
>>> Typically, VSA's are part of a user record or a group definition,
>>> rather than an IP address definition.
>>
>>> Could you give me a bit more detail on your requirments?
>>
>>> regards
>>
>>> Hugh
>>
>>
>>> On 17 Apr 2008, at 19:26, Toomas Kärner wrote:
>>>> Hi,
>>>>
>>>> Simple question: Currently I can see that from AddressAllocator  
>>>> SQL to
>>>> AuthBy Dynaddress are returned 2 attributes (that get then mapped).
>>>> I'd like to return more attributes than 2 (default gw + some VSA's),
>>>> how?
>>>>
>>>>
>>>> Best regards,
>>>> Toomas
>>>>
>>>>
>>>> --
>>>> Archive at http://www.open.com.au/archives/radiator/
>>>> Announcements on radiator-announce at open.com.au
>>>> To unsubscribe, email 'majordomo at open.com.au' with
>>>> 'unsubscribe radiator' in the body of the message.
>>
>>
>>
>>> NB:
>>
>>> Have you read the reference manual ("doc/ref.html")?
>>> Have you searched the mailing list archive (www.open.com.au/archives/
>>> radiator)?
>>> Have you had a quick look on Google (www.google.com)?
>>> Have you included a copy of your configuration file (no secrets),
>>> together with a trace 4 debug showing what is happening?
>>> Have you checked the RadiusExpert wiki:
>>> http://www.open.com.au/wiki/index.php/Main_Page
>>
>>
>>
>> --
>> Archive at http://www.open.com.au/archives/radiator/
>> Announcements on radiator-announce at open.com.au
>> To unsubscribe, email 'majordomo at open.com.au' with
>> 'unsubscribe radiator' in the body of the message.



> NB:

> Have you read the reference manual ("doc/ref.html")?
> Have you searched the mailing list archive (www.open.com.au/archives/ 
> radiator)?
> Have you had a quick look on Google (www.google.com)?
> Have you included a copy of your configuration file (no secrets),
> together with a trace 4 debug showing what is happening?
> Have you checked the RadiusExpert wiki:
> http://www.open.com.au/wiki/index.php/Main_Page




--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.