(RADIATOR) Ipv6 and authport change on radiator on window xp
Hugh Irvine
hugh at open.com.au
Wed Mar 22 22:19:05 CST 2006
Hello -
Well I am guessing that Windows does not have IPv6 support installed.
regards
Hugh
On 23 Mar 2006, at 15:07, <YF at uni-holding.com> wrote:
> Thanks Hugh,I changed to 11647 as authport and still got the
> error.Here below is the error message and my configure file
> changes.Please advise.thanks!
> Rgds
> YF
>
> C:\Program Files\Radiator>perl \perl\bin\radiusd
> Thu Mar 23 12:03:43 2006: DEBUG: Finished reading configuration
> file 'C:\Program
> Files\Radiator\radius.cfg'
> Thu Mar 23 12:03:43 2006: DEBUG: Reading dictionary file './
> dictionary'
> Thu Mar 23 12:03:44 2006: DEBUG: Creating authentication port
> ipv6::::11647
> Could not create authentication socket: Unknown error at (eval 4)
> line 541.
> ...caught at \perl\bin\radiusd line 2.
>
> C:\Program Files\Radiator>
>
>
>
> config file update:
>
> # You will probably want to add other Clients to suit your site,
> # one for each NAS you want to work with
>
> AuthPort 11647
> AcctPort 11648
>
>
> # This will handle requests from the IPV6 loopback address only
> <Client ipv6:::1>
> Secret topsec
> DupInterval 0
>
>
>
>
> ----- Original Message ----- From: "Hugh Irvine" <hugh at open.com.au>
> To: <YF at uni-holding.com>
> Cc: "Radiator" <radiator at open.com.au>
> Sent: Monday, March 20, 2006 6:11 AM
> Subject: Re: (RADIATOR) Ipv6 and authport change on radiator on
> window xp
>
>
>>
>>
>> Hello YF -
>>
>> Could you try using different port numbers altogether?
>>
>> Try something like this:
>>
>>
>> AuthPort 11645
>>
>> AcctPort 11646
>>
>>
>> This way we can tell whether it is a port problem or something else.
>>
>> regards
>>
>> Hugh
>>
>>
>> On 19 Mar 2006, at 23:45, <YF at uni-holding.com> <YF at uni-
>> holding.com> wrote:
>>
>>> Thanks!
>>> I checked, and found 2 Radius software tested on this XP PC. IAS not
>>> installed though.I disabled those radius service ,and use netstat
>>> - a to
>>> check , port 1645 not in use any more,but it still gave me that
>>> error,"
>>> Could not create authentication socket: Unknown error at (eval
>>> 4) line 541.
>>> ...caught at c:\Perl\bin\radiusd line 2. "
>>>
>>> can you advise?Thanks!
>>>
>>> C:\Program Files\Radiator>
>>> C:\Program Files\Radiator>netstat -a
>>>
>>> Active Connections
>>>
>>> Proto Local Address Foreign Address State
>>> TCP hw-4cf5e4c6e681:http hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:epmap hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:211 hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:microsoft-ds hw-4cf5e4c6e681:0
>>> LISTENING
>>> TCP hw-4cf5e4c6e681:gds_db hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:3306 hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:3389 hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:1025 hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:10110 hw-4cf5e4c6e681:0 LISTENING
>>> TCP hw-4cf5e4c6e681:netbios-ssn hw-4cf5e4c6e681:0
>>> LISTENING
>>> UDP hw-4cf5e4c6e681:microsoft-ds *:*
>>> UDP hw-4cf5e4c6e681:isakmp *:*
>>> UDP hw-4cf5e4c6e681:4500 *:*
>>> UDP hw-4cf5e4c6e681:ntp *:*
>>> UDP hw-4cf5e4c6e681:1900 *:*
>>> UDP hw-4cf5e4c6e681:ntp *:*
>>> UDP hw-4cf5e4c6e681:netbios-ns *:*
>>> UDP hw-4cf5e4c6e681:netbios-dgm *:*
>>> UDP hw-4cf5e4c6e681:1900 *:*
>>>
>>> C:\Program Files\Radiator>
>>> C:\Program Files\Radiator>
>>> C:\Program Files\Radiator>perl c:\Perl\bin\radiusd
>>> Thu Mar 16 23:11:37 2006: DEBUG: Finished reading configuration file
>>> 'C:\Program
>>> Files\Radiator\radius.cfg'
>>> This Radiator license will expire on 2006-07-01
>>> This Radiator license will stop operating after 1000 requests
>>> To purchase an unlimited full source version of Radiator, see
>>> http://www.open.com.au/ordering.html
>>> To extend your license period, contact admin at open.com.au
>>>
>>> Thu Mar 16 23:11:37 2006: DEBUG: Reading dictionary file './
>>> dictionary'
>>> Thu Mar 16 23:11:37 2006: DEBUG: Creating authentication port
>>> ipv6::::1645
>>> Could not create authentication socket: Unknown error at (eval
>>> 4) line 541.
>>> ...caught at c:\Perl\bin\radiusd line 2.
>>>
>>>
>>>
>>> ----- Original Message ----- From: "Hugh Irvine" <hugh at open.com.au>
>>> To: <scottshaw at 163.com>
>>> Cc: "Radiator" <radiator at open.com.au>
>>> Sent: Thursday, March 16, 2006 5:19 AM
>>> Subject: Re: (RADIATOR) Ipv6 and authport change on radiator on
>>> window xp
>>>
>>>
>>>>
>>>> Hello YF -
>>>>
>>>> The error shown below is due to some other program already
>>>> listening on
>>>> the port number(s) you have specified.
>>>>
>>>> On a Windows server this is usually the Microsoft radius server
>>>> that must
>>>> be disabled before you can run Radiator.
>>>>
>>>> regards
>>>>
>>>> Hugh
>>>>
>>>>
>>>> On 16 Mar 2006, at 01:54, <scottshaw at 163.com>
>>>> <scottshaw at 163.com> wrote:
>>>>
>>>>> Hugh, thanks! I installed socket6 on windows Xp,which
>>>>> supports IPv6.
>>>>> Then I use the ipv6 sample in goodies , rename as radius.cfg
>>>>> and run
>>>>> radiusd again, got the error of
>>>>> "Could not create authentication socket: Unknown error at
>>>>> (eval 4) line
>>>>> 541.
>>>>> ...caught at c:\Perl\bin\radiusd line 2"
>>>>> Can you advise?Thanks!
>>>>> Rgds
>>>>> YF
>>>>>
>>>>>
>>>>> C:\>ppm install http://www.open.com.au/radiator/free-downloads/
>>>>> Socket6.ppd
>>>>> Installing package 'http://www.open.com.au/radiator/free-
>>>>> downloads/
>>>>> Socket6.ppd'.
>>>>> ..
>>>>> Downloading http://www.open.com.au/radiator/free-downloads/
>>>>> MSWin32-
>>>>> x86-multi-thr
>>>>> ead/Socket6.ppm.tar.gz ...
>>>>> Installing C:\Perl\site\lib\auto\Socket6\Socket6.dll
>>>>> Installing C:\Perl\site\lib\auto\Socket6\Socket6.lib
>>>>> Installing C:\Perl\site\lib\auto\Socket6\Socket6.exp
>>>>> Installing C:\Perl\site\lib\auto\Socket6\Socket6.bs
>>>>> Installing C:\Perl\site\lib\Socket6.pm
>>>>>
>>>>> C:\
>>>>>
>>>>> C:\Program Files\Radiator>perl c:\Perl\bin\radiusd -foreground
>>>>> ....
>>>>> Wed Mar 15 22:45:15 2006: DEBUG: Reading dictionary file './
>>>>> dictionary'
>>>>> Wed Mar 15 22:45:15 2006: DEBUG: Creating authentication port
>>>>> ipv6::::1645
>>>>> Could not create authentication socket: Unknown error at (eval
>>>>> 4) line
>>>>> 541.
>>>>> ...caught at c:\Perl\bin\radiusd line 2.
>>>>>
>>>>>
>>>>> My config file:
>>>>>
>>>>> # ipv6.cfg
>>>>>
>>>>> Foreground
>>>>> LogStdout
>>>>> LogDir .
>>>>> DbDir .
>>>>> # User a lower trace level in production systems:
>>>>> Trace 4
>>>>>
>>>>> # Listen for radius requests on all IPV6 and IPV4 addresses
>>>>> BindAddress ipv6:::
>>>>>
>>>>> # Another example: listen on the IPV6 loopback address, and on a
>>>>> specific IPV4 address:
>>>>> #BindAddress ipv6:::1,203.63.154.29
>>>>>
>>>>> # You will probably want to add other Clients to suit your site,
>>>>> # one for each NAS you want to work with
>>>>>
>>>>> # This will handle requests from the IPV6 loopback address only
>>>>> <Client ipv6:::1>
>>>>> Secret topsec
>>>>> DupInterval 0
>>>>> </Client>
>>>>>
>>>>> # This will handle requests from a specific IPV6 address only:
>>>>> <Client ipv6:2001:720:1500:1::a100>
>>>>> Secret mysecret
>>>>> DupInterval 0
>>>>> </Client>
>>>>>
>>>>> # This will handle requests from
>>>>> <Client 192.168.2.121>
>>>>> Secret topsec
>>>>> DupInterval 0
>>>>> </Client>
>>>>>
>>>>> <Realm DEFAULT>
>>>>> <AuthBy FILE>
>>>>> Filename ./users
>>>>> </AuthBy>
>>>>> # Log accounting to a detail file
>>>>> AcctLogFileName ./detail
>>>>> </Realm>
>>>>>
>>>>> # This proxies all users with a user name like username at proxy.com
>>>>> # to an IPV6 server on loclahost
>>>>> <Realm proxy.com>
>>>>> <AuthBy RADIUS>
>>>>> # This binds our outgoing proxy port to IPV6 any address. We
>>>>> need this
>>>>> # if the main incoming radius port does not have an IPV6
>>>>> BindAddress
>>>>> # (the default in an IPV4 ANY address)
>>>>> # In order to proxy to an IPV6 address, LocalAddress
>>>>> # _must_ be bound to an IPV6 address
>>>>> # LocalAddress ipv6:::
>>>>>
>>>>> # On the other hand if the main incoming BindAddress is ipv6,
>>>>> # and you wish to proxy to an IPV4 address, you will need
>>>>> LocalAddress 0.0.0.0
>>>>>
>>>>> # Proxy to localhost by IPV6
>>>>> Host ipv6:::1
>>>>>
>>>>> AuthPort 1647
>>>>> AcctPort 1648
>>>>> </AuthBy>
>>>>> </Realm>
>>>>>
>>>>> ----- Original Message ----- From: "Hugh Irvine"
>>>>> <hugh at open.com.au>
>>>>> To: <YF at uni-holding.com>
>>>>> Cc: "Radiator" <radiator at open.com.au>
>>>>> Sent: Tuesday, March 14, 2006 4:06 AM
>>>>> Subject: Re: (RADIATOR) Ipv6 and authport change on radiator on
>>>>> window
>>>>> xp
>>>>>
>>>>>
>>>>>>
>>>>>>
>>>>>> Hello YF -
>>>>>>
>>>>>> As shown in the error message (and in the manual) you will
>>>>>> need to
>>>>>> install Socket6 before you can use IPv6.
>>>>>>
>>>>>> See the example configuration file in "goodies/ipv6.cfg" in the
>>>>>> Radiator 3.14 reference manual.
>>>>>>
>>>>>> Note that your operating system must also support IPv6.
>>>>>>
>>>>>> regards
>>>>>>
>>>>>> Hugh
>>>>>>
>>>>>>
>>>>>> On 14 Mar 2006, at 01:17, <YF at uni-holding.com> <YF at uni-
>>>>>> holding.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Dear friends,
>>>>>>> I have installed the radiator on a windows XP, with basic test/
>>>>>>> radtest works well,and with a NAS system.Now I changed it
>>>>>>> use port
>>>>>>> 1812 for authentication and added IPv6 statement,But I got
>>>>>>> the error
>>>>>>> as below:
>>>>>>> 1.Could not bind authentication socket
>>>>>>> 2.DEBUG: Creating authentication port :::1:1645
>>>>>>> Can't locate Socket6.pm in @INC (@INC contains: . C:/Perl/lib
>>>>>>> C:/
>>>>>>> Perl/site/lib
>>>>>>> ) at C:/Perl/site/lib/Radius/Util.pm line 754
>>>>>>>
>>>>>>> can any of you advise?I will do an IPv6 testing with a Ipv6
>>>>>>> router in
>>>>>>> a few days,radiator will be on windows2003 server.Thanks!
>>>>>>> YF
>>>>>>>
>>>>>>> C:\Program Files\Radiator>perl c:\perl\bin\radiusd -foreground
>>>>>>>
>>>>>>> Mon Mar 13 21:56:44 2006: DEBUG: Reading dictionary file 'c:/
>>>>>>> Program
>>>>>>> Files/Radi
>>>>>>> tor/dictionary'
>>>>>>> Mon Mar 13 21:56:45 2006: DEBUG: Creating authentication port
>>>>>>> 0.0.0.0:1812
>>>>>>> Could not bind authentication socket: Unknown error at (eval
>>>>>>> 4) line
>>>>>>> 544.
>>>>>>> ...caught at c:\perl\bin\radiusd line 2.
>>>>>>>
>>>>>>>
>>>>>>> C:\Program Files\Radiator>perl c:\perl\bin\radiusd -foreground
>>>>>>> Mon Mar 13 21:59:23 2006: DEBUG: Finished reading
>>>>>>> configuration file
>>>>>>> 'C:\Progra
>>>>>>> Files\Radiator\radius.cfg'
>>>>>>>
>>>>>>> Mon Mar 13 21:59:23 2006: DEBUG: Reading dictionary file 'c:/
>>>>>>> Program
>>>>>>> Files/Radi
>>>>>>> tor/dictionary'
>>>>>>> Mon Mar 13 21:59:23 2006: DEBUG: Creating authentication
>>>>>>> port :::
>>>>>>> 1:1645
>>>>>>> Can't locate Socket6.pm in @INC (@INC contains: . C:/Perl/lib
>>>>>>> C:/
>>>>>>> Perl/site/lib
>>>>>>> ) at C:/Perl/site/lib/Radius/Util.pm line 754.
>>>>>>> ...caught at c:\perl\bin\radiusd line 2.
>>>>>>>
>>>>>>> C:\Program Files\Radiator>
>>>>>>>
>>>>>>>
>>>>>>> The config file:
>>>>>>>
>>>>>>>
>>>>>>> Foreground
>>>>>>> LogStdout
>>>>>>> LogDir c:/Program Files/Radiator
>>>>>>> DbDir c:/Program Files/Radiator
>>>>>>>
>>>>>>> BindAddress :::1
>>>>>>>
>>>>>>> AuthPort 1812
>>>>>>> AcctPort 1813
>>>>>>>
>>>>>>> # This will log at DEBUG level: very verbose
>>>>>>> # User a lower trace level in production systems, typically
>>>>>>> use 3
>>>>>>> Trace 4
>>>>>>>
>>>>>>> #
>>>>>>>
>>>>>>> <Client 192.168.2xx.121>
>>>>>>> Secret xxxx
>>>>>>> DupInterval 0
>>>>>>> Identifier topsystem
>>>>>>> </Client>
>>>>>>>
>>>>>>>
>>>>>>> # Authenticate all realms with this
>>>>>>> <Realm DEFAULT>
>>>>>>> # Look up user details in a flat file
>>>>>>> <AuthBy FILE>
>>>>>>> # %D is replaced by DbDir above
>>>>>>> Filename %D/users
>>>>>>> </AuthBy>
>>>>>>>
>>>>>>> # Log accounting to a detail file. %D is replaced by DbDir
>>>>>>> above
>>>>>>> AcctLogFileName %D/detail
>>>>>>> </Realm>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> NB:
>>>>>>
>>>>>> Have you read the reference manual ("doc/ref.html")?
>>>>>> Have you searched the mailing list archive (www.open.com.au/
>>>>>> archives/
>>>>>> radiator)?
>>>>>> Have you had a quick look on Google (www.google.com)?
>>>>>> Have you included a copy of your configuration file (no secrets),
>>>>>> together with a trace 4 debug showing what is happening?
>>>>>>
>>>>>> --
>>>>>> Radiator: the most portable, flexible and configurable RADIUS
>>>>>> server
>>>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>>>>> -
>>>>>> Nets: internetwork inventory and management - graphical,
>>>>>> extensible,
>>>>>> flexible with hardware, software, platform and database
>>>>>> independence.
>>>>>> -
>>>>>> CATool: Private Certificate Authority for Unix and Unix-like
>>>>>> systems.
>>>>>>
>>>>>>
>>>>
>>>>
>>>> NB:
>>>>
>>>> Have you read the reference manual ("doc/ref.html")?
>>>> Have you searched the mailing list archive (www.open.com.au/
>>>> archives/
>>>> radiator)?
>>>> Have you had a quick look on Google (www.google.com)?
>>>> Have you included a copy of your configuration file (no secrets),
>>>> together with a trace 4 debug showing what is happening?
>>>>
>>>> --
>>>> Radiator: the most portable, flexible and configurable RADIUS
>>>> server
>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>>> -
>>>> Nets: internetwork inventory and management - graphical,
>>>> extensible,
>>>> flexible with hardware, software, platform and database
>>>> independence.
>>>> -
>>>> CATool: Private Certificate Authority for Unix and Unix-like
>>>> systems.
>>>>
>>>>
>>>> --
>>>> Archive at http://www.open.com.au/archives/radiator/
>>>> Announcements on radiator-announce at open.com.au
>>>> To unsubscribe, email 'majordomo at open.com.au' with
>>>> 'unsubscribe radiator' in the body of the message.
>>
>>
>> NB:
>>
>> Have you read the reference manual ("doc/ref.html")?
>> Have you searched the mailing list archive (www.open.com.au/
>> archives/ radiator)?
>> Have you had a quick look on Google (www.google.com)?
>> Have you included a copy of your configuration file (no secrets),
>> together with a trace 4 debug showing what is happening?
>>
>> --
>> Radiator: the most portable, flexible and configurable RADIUS server
>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>> -
>> Nets: internetwork inventory and management - graphical, extensible,
>> flexible with hardware, software, platform and database independence.
>> -
>> CATool: Private Certificate Authority for Unix and Unix-like systems.
>>
>>
NB:
Have you read the reference manual ("doc/ref.html")?
Have you searched the mailing list archive (www.open.com.au/archives/
radiator)?
Have you had a quick look on Google (www.google.com)?
Have you included a copy of your configuration file (no secrets),
together with a trace 4 debug showing what is happening?
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows, MacOS X.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
-
CATool: Private Certificate Authority for Unix and Unix-like systems.
--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list