(RADIATOR) Simultaneous Use + CiscoVPDN (PPPOE)

[Michael Bellears]

We are testing pppoe from Cisco NAS (1841), and are having a problem
with simultaneous use (Current session is just dropped, and the new
session is allowed)

I am seeing the following in the logs:

Fri Jun  2 09:03:34 2006: NOTICE: CiscoVPDN: Checking
NAS_IP:0:test_user at test.com
Fri Jun  2 09:03:34 2006: DEBUG: Running command `/usr/bin/snmpwalk -c
"snmp_secret" NAS_IP .1.3.6.1.2.1.2.2.1.2 2>&1`
Fri Jun  2 09:03:34 2006: INFO:  Session for test_user at test.com at
NAS_IP:0 has gone away
Fri Jun  2 09:03:34 2006: DEBUG:  Deleting session for
test_user at test.com, NAS_IP, 0

The snmp query appears to not work from command line:

# /usr/bin/snmpwalk -c "snmp_secret" NAS_IP .1.3.6.1.2.1.2.2.1.2 2

snmpwalk: No securityName specified

Adding -v 2c *appears* to get it functioning(If this is a workaround,
where would I add this?(CiscoVPDN.pm?), but it is not listing the
current vpdn sessions:

/usr/bin/snmpwalk -c "snmp_secret" NAS_IP .1.3.6.1.2.1.2.2.1.2 2 -v 2c

IF-MIB::ifDescr.1 = STRING: FastEthernet0
IF-MIB::ifDescr.2 = STRING: BRI0
IF-MIB::ifDescr.3 = STRING: BRI0:1
IF-MIB::ifDescr.4 = STRING: BRI0:2
IF-MIB::ifDescr.5 = STRING: FastEthernet1
IF-MIB::ifDescr.6 = STRING: FastEthernet2
IF-MIB::ifDescr.7 = STRING: FastEthernet3
IF-MIB::ifDescr.8 = STRING: FastEthernet4
IF-MIB::ifDescr.9 = STRING: FastEthernet5
IF-MIB::ifDescr.10 = STRING: FastEthernet6
IF-MIB::ifDescr.11 = STRING: FastEthernet7
IF-MIB::ifDescr.12 = STRING: FastEthernet8
IF-MIB::ifDescr.13 = STRING: ATM0
IF-MIB::ifDescr.14 = STRING: Null0
IF-MIB::ifDescr.15 = STRING: ATM0-atm layer
IF-MIB::ifDescr.16 = STRING: ATM0.0-atm subif
IF-MIB::ifDescr.17 = STRING: ATM0-aal5 layer
IF-MIB::ifDescr.18 = STRING: ATM0.0-aal5 layer
IF-MIB::ifDescr.19 = STRING: ATM0-adsl
IF-MIB::ifDescr.20 = STRING: Vlan1
IF-MIB::ifDescr.21 = STRING: Loopback0
IF-MIB::ifDescr.22 = STRING: ATM0.1-atm subif
IF-MIB::ifDescr.23 = STRING: ATM0.1-aal5 layer
IF-MIB::ifDescr.24 = STRING: Virtual-Template11
IF-MIB::ifDescr.25 = STRING: Dialer0
IF-MIB::ifDescr.26 = STRING: BRI0-Physical
IF-MIB::ifDescr.27 = STRING: BRI0-Signaling
IF-MIB::ifDescr.28 = STRING: BRI0:1-Bearer Channel
IF-MIB::ifDescr.29 = STRING: BRI0:2-Bearer Channel
IF-MIB::ifDescr.30 = STRING: Virtual-Access1
IF-MIB::ifDescr.31 = STRING: Virtual-Access2
IF-MIB::ifDescr.34 = STRING: Virtual-Access5
IF-MIB::ifDescr.38 = STRING: Virtual-Access9
IF-MIB::ifDescr.39 = STRING: Virtual-Access10

Radiator 3.14/Radmin 1.10

Any suggestions greatly appreciated.


Regards, 

Michael

--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.