(RADIATOR) Radiator doesn't bind to LDAP
David Felipe Rios Rojas
DRIOSR at eeppm.com
Wed Feb 15 16:17:57 CST 2006
> -----Mensaje original-----
> De: Hugh Irvine [mailto:hugh at open.com.au]
> Enviado el: Martes, 14 de Febrero de 2006 11:37 p.m.
> Para: David Felipe Rios Rojas
> CC: radiator at open.com.au
> Asunto: Re: (RADIATOR) Radiator doesn't bind to LDAP
>
>
> Hello David -
>
> I think the AuthBy LDAP 2 configuration is incorrect.
>
> Try this instead:
>
>
> <Realm ldap.realm>
> <AuthBy LDAP2>
> Host xxxxxx
> Port 389
> AuthDN root
> AuthPassword xxxxxx
> BaseDN ou=xxxxx,o=xxxxx
> SearchFilter (&(%0=%1)(radiusloginservice=E))
> UsernameAttr uid
> PasswordAttr userPassword
> </AuthBy>
> </Realm>
>
>
> hope that helps
>
> regards
>
> Hugh
>
Hi Hugh.
I changed config file as you wrote but it didn't work :(
I used "snoop" to see what it was sending to LDAP server and
guess what! it doesn't send anything!; this is information
showed by snoop:
#############################################
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 1 arrived at 14:56:10.23
ETHER: Packet size = 62 bytes
ETHER: Destination = 0:e0:b6:4:d9:62,
ETHER: Source = 8:0:20:c7:98:4c, Sun
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 48 bytes
IP: Identification = 34837
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 64 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 479f
IP: Source address = ***.***.***.***, ********
IP: Destination address = ***.***.***.***, ********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 46731
TCP: Destination port = 389 (LDAP)
TCP: Sequence number = 3244986615
TCP: Acknowledgement number = 0
TCP: Data offset = 28 bytes
TCP: Flags = 0x02
TCP: ..0. .... = No urgent pointer
TCP: ...0 .... = No acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..1. = Syn
TCP: .... ...0 = No Fin
TCP: Window = 24820
TCP: Checksum = 0xaca4
TCP: Urgent pointer = 0
TCP: Options: (8 bytes)
TCP: - No operation
TCP: - No operation
TCP: - SACK permitted option
TCP: - Maximum segment size = 1460 bytes
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 2 arrived at 14:56:10.23
ETHER: Packet size = 62 bytes
ETHER: Destination = 8:0:20:c7:98:4c, Sun
ETHER: Source = 0:e0:b6:4:d9:62,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 48 bytes
IP: Identification = 16165
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 60 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 948f
IP: Source address = ***.***.***.***, **********
IP: Destination address = ***.***.***.***, ********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 389
TCP: Destination port = 46731
TCP: Sequence number = 1601298321
TCP: Acknowledgement number = 3244986616
TCP: Data offset = 28 bytes
TCP: Flags = 0x12
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..1. = Syn
TCP: .... ...0 = No Fin
TCP: Window = 64860
TCP: Checksum = 0xd177
TCP: Urgent pointer = 0
TCP: Options: (8 bytes)
TCP: - Maximum segment size = 1380 bytes
TCP: - No operation
TCP: - No operation
TCP: - SACK permitted option
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 3 arrived at 14:56:10.23
ETHER: Packet size = 54 bytes
ETHER: Destination = 0:e0:b6:4:d9:62,
ETHER: Source = 8:0:20:c7:98:4c, Sun
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 40 bytes
IP: Identification = 34838
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 64 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 47a6
IP: Source address = ***.***.***.***, ********
IP: Destination address = ***.***.***.***, **********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 46731
TCP: Destination port = 389 (LDAP)
TCP: Sequence number = 3244986616
TCP: Acknowledgement number = 1601298322
TCP: Data offset = 20 bytes
TCP: Flags = 0x10
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..0. = No Syn
TCP: .... ...0 = No Fin
TCP: Window = 24840
TCP: Checksum = 0x9a40
TCP: Urgent pointer = 0
TCP: No options
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 4 arrived at 14:56:10.23
ETHER: Packet size = 54 bytes
ETHER: Destination = 0:e0:b6:4:d9:62,
ETHER: Source = 8:0:20:c7:98:4c, Sun
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 40 bytes
IP: Identification = 34839
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 64 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 47a5
IP: Source address = ***.***.***.***, ********
IP: Destination address = ***.***.***.***, ********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 46731
TCP: Destination port = 389 (LDAP)
TCP: Sequence number = 3244986616
TCP: Acknowledgement number = 1601298322
TCP: Data offset = 20 bytes
TCP: Flags = 0x11
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..0. = No Syn
TCP: .... ...1 = Fin
TCP: Window = 24840
TCP: Checksum = 0x9a3f
TCP: Urgent pointer = 0
TCP: No options
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 5 arrived at 14:56:10.24
ETHER: Packet size = 60 bytes
ETHER: Destination = 8:0:20:c7:98:4c, Sun
ETHER: Source = 0:e0:b6:4:d9:62,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 40 bytes
IP: Identification = 16166
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 60 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 9496
IP: Source address = ***.***.***.***, ********
IP: Destination address = ***.***.***.***, ********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 389
TCP: Destination port = 46731
TCP: Sequence number = 1601298322
TCP: Acknowledgement number = 3244986617
TCP: Data offset = 20 bytes
TCP: Flags = 0x10
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..0. = No Syn
TCP: .... ...0 = No Fin
TCP: Window = 64860
TCP: Checksum = 0xfdea
TCP: Urgent pointer = 0
TCP: No options
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 6 arrived at 14:56:11.67
ETHER: Packet size = 60 bytes
ETHER: Destination = 8:0:20:c7:98:4c, Sun
ETHER: Source = 0:e0:b6:4:d9:62,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 40 bytes
IP: Identification = 16167
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 60 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 9495
IP: Source address = ***.***.***.***, ********
IP: Destination address = ***.***.***.***, ********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 389
TCP: Destination port = 46731
TCP: Sequence number = 1601298322
TCP: Acknowledgement number = 3244986617
TCP: Data offset = 20 bytes
TCP: Flags = 0x11
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..0. = No Syn
TCP: .... ...1 = Fin
TCP: Window = 64860
TCP: Checksum = 0xfde9
TCP: Urgent pointer = 0
TCP: No options
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 7 arrived at 14:56:11.67
ETHER: Packet size = 54 bytes
ETHER: Destination = 0:e0:b6:4:d9:62,
ETHER: Source = 8:0:20:c7:98:4c, Sun
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: Total length = 40 bytes
IP: Identification = 34840
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 64 seconds/hops
IP: Protocol = 6 (TCP)
IP: Header checksum = 47a4
IP: Source address = ***.***.***.***, ********
IP: Destination address = ***.***.***.***, ********
IP: No options
IP:
TCP: ----- TCP Header -----
TCP:
TCP: Source port = 46731
TCP: Destination port = 389 (LDAP)
TCP: Sequence number = 3244986617
TCP: Acknowledgement number = 1601298323
TCP: Data offset = 20 bytes
TCP: Flags = 0x10
TCP: ..0. .... = No urgent pointer
TCP: ...1 .... = Acknowledgement
TCP: .... 0... = No push
TCP: .... .0.. = No reset
TCP: .... ..0. = No Syn
TCP: .... ...0 = No Fin
TCP: Window = 24840
TCP: Checksum = 0x9a3e
TCP: Urgent pointer = 0
TCP: No options
TCP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
#############################################
If you use grep to filter it, you could see that lines with
"LDAP:" don't have any important information.
PD. Sensible information was replace with "*"
>
> On 14 Feb 2006, at 08:45, David Felipe Rios Rojas wrote:
>
> > I'm testing Radiator for first time, but I'm a little
> confused because
> > an error message when it try binding to LDAP server; I use LDAP
> > superuser account just to try it.
> >
> > Next is my config file; it was made based on sample
> configuration file
> > provided and several items are not configured yet because I just
> > want to
> > test LDAP binding first.
> >
> > Here we go:
> >
> > ##################################################################
> > Foreground
> >
> > LogStdout
> >
> > Trace 4
> >
> > PidFile /tmp/radiusd.pid
> >
> > AuthPort 1645
> >
> > AcctPort 1646
> >
> > LogFile %L/%Y-%m-%d_logfile
> > LogDir /var/log/radius
> >
> > DbDir .
> >
> > DictionaryFile /etc/radiator/dictionary,/etc/radiator/
> > dictionary.ascend
> >
> > User radius
> > Group radius
> >
> > <Client DEFAULT>
> > Secret mysecret
> > DupInterval 0
> > DefaultRealm ldap.realm
> > StatusServerShowClientDetails
> > </Client>
> >
> >
> > <Realm DEFAULT>
> > RewriteUsername s/^([^@]+).*/$1/
> > MaxSessions 2
> > AcctLogFileName %L/detail
> > WtmpFileName %L/wtmp
> > PasswordLogFileName %L/password.log
> > RejectHasReason
> >
> > <AuthBy FILE>
> > Filename /etc/radiator/users
> > DynamicReply USR-IP-Input-Filter
> > DynamicCheck Group
> > UseAddressHint
> > AddToReply Reply-Message=hello
> > AddToReplyIfNotExist Ascend-Data-Filter="ip in
> forward tcp est"
> > DefaultReply
> Service-Type=Framed-User,Framed-Protocol=PPP
> > RejectEmptyPassword
> > AutoMPPEKeys
> > EAPType MD5-Challenge
> > </AuthBy>
> >
> > <AuthBy GROUP>
> > AuthByPolicy ContinueUntilAccept
> > AddToReply Reply-Message=xxxx
> > <AuthBy FILE>
> > Filename users
> > </AuthBy>
> > <AuthBy FILE>
> > Filename users
> > </AuthBy>
> > </AuthBy>
> >
> > </Realm>
> >
> > <Realm unix.realm>
> > RewriteUsername s/^([^@]+).*/$1/
> >
> > <AuthBy UNIX>
> > Identifier System
> > DefaultReply
> Service-Type=Framed-User,Framed-Protocol=PPP
> > </AuthBy>
> > </Realm>
> >
> >
> > <Realm system.realm>
> > RewriteUsername s/^([^@]+).*/$1/
> > </Realm>
> >
> >
> > <Realm ldap.realm>
> > <AuthBy LDAP2>
> > Host xxxxxx
> > Port 389
> > AuthDN cn=root
> > AuthPassword xxxxxx
> > BaseDN
> (&(%0=%1,ou=xxxxx,o=xxxxx)(radiusloginservice=E))
> > UsernameAttr uid
> > PasswordAttr userPassword
> > </AuthBy>
> > </Realm>
> >
> >
> >
> > <Realm external.realm>
> > RewriteUsername s/^([^@]+).*/$1/
> > <AuthBy EXTERNAL>
> > Command perl ./goodies/testcommand.pl
> > DecryptPassword
> > </AuthBy>
> > </Realm>
> >
> > <Realm internal.realm>
> > <AuthBy INTERNAL>
> > DefaultResult accept
> > </AuthBy>
> > </Realm>
> >
> >
> > <Realm mobileip.realm>
> > RewriteUsername s/^([^@]+).*/$1/
> > <AuthBy FILE>
> > Filename ./users
> > </AuthBy>
> > <AuthBy MOBILEIP>
> > DefaultHAAddress 192.10.10.2
> > </AuthBy>
> > </Realm>
> >
> >
> > <AuthBy FILE>
> > Identifier identifier1
> > </AuthBy>
> >
> >
> > <Realm xyz>
> > AuthBy identifier1
> > </Realm>
> > ##################################################################
> >
> >
> > And this is output debug after "perl radpwtst -user driosr -
> > password pass" is execute:
> >
> > ##################################################################
> > Fri Feb 10 07:45:26 2006: DEBUG: Reading group file /etc/group
> > Fri Feb 10 07:45:27 2006: DEBUG: Finished reading configuration
> > file '/etc/radiator/radius.cfg'
> > This Radiator license will expire on 2006-07-01
> > This Radiator license will stop operating after 1000 requests
> > To purchase an unlimited full source version of Radiator, see
> > http://www.open.com.au/ordering.html
> > To extend your license period, contact admin at open.com.au
> >
> > Fri Feb 10 07:45:27 2006: DEBUG: Reading dictionary file '/etc/
> > radiator/dictionary'
> > Fri Feb 10 07:45:28 2006: DEBUG: Reading dictionary file '/etc/
> > radiator/dictionary.ascend'
> > Fri Feb 10 07:45:28 2006: DEBUG: Creating authentication port
> > 0.0.0.0:1645
> > Fri Feb 10 07:45:28 2006: DEBUG: Creating accounting port
> 0.0.0.0:1646
> > Fri Feb 10 07:45:28 2006: NOTICE: Server started: Radiator 3.14 on
> > XXXX(LOCKED)
> > Fri Feb 10 07:46:16 2006: DEBUG: Packet dump:
> > *** Received from 127.0.0.1 port 33466 ....
> > Code: Access-Request
> > Identifier: 211
> > Authentic: 1234567890123456
> > Attributes:
> > User-Name = "driosr"
> > Service-Type = Framed-User
> > NAS-IP-Address = 203.63.154.1
> > NAS-Identifier = "203.63.154.1"
> > NAS-Port = 1234
> > Called-Station-Id = "123456789"
> > Calling-Station-Id = "987654321"
> > NAS-Port-Type = Async
> > User-Password = <137><234>,<222><175>
> > \<4><246><188>8<9><160><216>}x<153>
> >
> > Fri Feb 10 07:46:17 2006: DEBUG: Handling request with Handler
> > 'Realm=ldap.realm'
> > Fri Feb 10 07:46:17 2006: DEBUG: Deleting session for driosr,
> > 203.63.154.1, 1234
> > Fri Feb 10 07:46:17 2006: DEBUG: Handling with Radius::AuthLDAP2:
> > Fri Feb 10 07:46:17 2006: INFO: Connecting to XXXX:389
> > Fri Feb 10 07:46:17 2006: INFO: Attempting to bind to LDAP server
> > XXXX:389
> > Fri Feb 10 07:46:17 2006: ERR: Could not bind connection with
> > cn=root, xxxx, error: LDAP error code -1(0xFFFFFFFF) (server XXXX:
> > 389).
> > Fri Feb 10 07:46:17 2006: ERR: Backing off from XXXX:389 for 600
> > seconds.
> > Fri Feb 10 07:46:17 2006: DEBUG: AuthBy LDAP2 result: IGNORE, User
> > database access error
> > Fri Feb 10 07:46:22 2006: DEBUG: Packet dump:
> > *** Received from 127.0.0.1 port 33466 ....
> > Code: Accounting-Request
> > Identifier: 212
> > Authentic: .<16>t<179>;<188><213>L<151><182><131>L<144>p<159><245>
> > Attributes:
> > User-Name = "driosr"
> > Service-Type = Framed-User
> > NAS-IP-Address = 203.63.154.1
> > NAS-Identifier = "203.63.154.1"
> > NAS-Port = 1234
> > NAS-Port-Type = Async
> > Acct-Session-Id = "00001234"
> > Acct-Status-Type = Start
> > Called-Station-Id = "123456789"
> > Calling-Station-Id = "987654321"
> > Acct-Delay-Time = 0
> >
> > Fri Feb 10 07:46:22 2006: DEBUG: Handling request with Handler
> > 'Realm=ldap.realm'
> > Fri Feb 10 07:46:22 2006: DEBUG: Adding session for driosr,
> > 203.63.154.1, 1234
> > Fri Feb 10 07:46:22 2006: DEBUG: Handling with Radius::AuthLDAP2:
> > Fri Feb 10 07:46:22 2006: DEBUG: AuthBy LDAP2 result: ACCEPT,
> > Fri Feb 10 07:46:22 2006: DEBUG: Accounting accepted
> > Fri Feb 10 07:46:22 2006: DEBUG: Packet dump:
> > *** Sending to 127.0.0.1 port 33466 ....
> > Code: Accounting-Response
> > Identifier: 212
> > Authentic: .<16>t<179>;<188><213>L<151><182><131>L<144>p<159><245>
> > Attributes:
> >
> > Fri Feb 10 07:46:22 2006: DEBUG: Packet dump:
> > *** Received from 127.0.0.1 port 33466 ....
> > Code: Accounting-Request
> > Identifier: 213
> > Authentic: 4f<127><151><175><206><15><9>uq<149><22>&_<238>M
> > Attributes:
> > User-Name = "driosr"
> > Service-Type = Framed-User
> > NAS-IP-Address = 203.63.154.1
> > NAS-Identifier = "203.63.154.1"
> > NAS-Port = 1234
> > NAS-Port-Type = Async
> > Acct-Session-Id = "00001234"
> > Acct-Status-Type = Stop
> > Called-Station-Id = "123456789"
> > Calling-Station-Id = "987654321"
> > Acct-Delay-Time = 0
> > Acct-Session-Time = 1000
> > Acct-Input-Octets = 20000
> > Acct-Output-Octets = 30000
> >
> > Fri Feb 10 07:46:22 2006: DEBUG: Handling request with Handler
> > 'Realm=ldap.realm'
> > Fri Feb 10 07:46:22 2006: DEBUG: Deleting session for driosr,
> > 203.63.154.1, 1234
> > Fri Feb 10 07:46:22 2006: DEBUG: Handling with Radius::AuthLDAP2:
> > Fri Feb 10 07:46:22 2006: DEBUG: AuthBy LDAP2 result: ACCEPT,
> > Fri Feb 10 07:46:22 2006: DEBUG: Accounting accepted
> > Fri Feb 10 07:46:22 2006: DEBUG: Packet dump:
> > *** Sending to 127.0.0.1 port 33466 ....
> > Code: Accounting-Response
> > Identifier: 213
> > Authentic: 4f<127><151><175><206><15><9>uq<149><22>&_<238>M
> > Attributes:
> > ##################################################################
> >
> >
> > And this is the output to "perl radpwtst -user driosr -password
> > pass" command:
> >
> > ##################################################################
> > sending Access-Request...
> > No reply
> > sending Accounting-Request Start...
> > OK
> > sending Accounting-Request Stop...
> > OK
> > ##################################################################
> >
> >
> > Could you help me?
> >
> > Thanks in advance.
> >
> > --
> > David Rios R.
> >
> > --
> > Archive at http://www.open.com.au/archives/radiator/
> > Announcements on radiator-announce at open.com.au
> > To unsubscribe, email 'majordomo at open.com.au' with
> > 'unsubscribe radiator' in the body of the message.
>
>
> NB:
>
> Have you read the reference manual ("doc/ref.html")?
> Have you searched the mailing list archive (www.open.com.au/archives/
> radiator)?
> Have you had a quick look on Google (www.google.com)?
> Have you included a copy of your configuration file (no secrets),
> together with a trace 4 debug showing what is happening?
>
> --
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
> -
> CATool: Private Certificate Authority for Unix and Unix-like systems.
>
>
>
--
David Rios R.
Ingenieria de Desarrollo
Expansion Nuevos Servicios
Empresas Publicas de Medellin
--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list