(RADIATOR) Wireless Config
Andrew
andrewb at acenet.net.au
Thu Oct 27 02:09:02 CDT 2005
Thanks Hugh, hope you don't mind me dumping the info here. I have also tried
updating to 3.13 and applying the latest patches. Please note I have
*hidden* some user/directory details.
---- TRACE ---
*** Received from 192.168.0.251 port 1316 ....
Code: Access-Request
Identifier: 0
Authentic: .<137>K<246>N<217>]<182>L<176>%vz<254><17><228>
Attributes:
Message-Authenticator = <156><A33K<229>\(n<232><255><172>U<223><137>
Service-Type = Framed-User
User-Name = "***"
Framed-MTU = 1488
Called-Station-Id = "00-11-95-E5-C3-90:Acenet"
Calling-Station-Id = "00-0F-3D-A9-7E-09"
NAS-Identifier = "D-Link Access Point"
NAS-Port-Type = Wireless-IEEE-802-11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = <2><0><0><11><1>****
NAS-IP-Address = 192.168.0.251
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Tue Dec 27 22:31:56 2005: DEBUG: Handling request with Handler ''
Tue Dec 27 22:31:56 2005: DEBUG: Deleting session for ***, 192.168.0.251, 1
Tue Dec 27 22:31:56 2005: DEBUG: Handling with Radius::AuthFILE:
Tue Dec 27 22:31:56 2005: DEBUG: Handling with EAP: code 2, 0, 11
Tue Dec 27 22:31:56 2005: DEBUG: Response type 1
Tue Dec 27 22:31:56 2005: ERR: Could not handle an EAP request: Can't locate
object method "response_identity" via package "Radius::EAP_25" at
/usr/local/lib/perl5/site_perl/5.8.0/Radius/EAP.pm line 145.
Tue Dec 27 22:31:56 2005: DEBUG: AuthBy FILE result: REJECT, Could not
handle an EAP request
Tue Dec 27 22:31:56 2005: INFO: Access rejected for ***: Could not handle an
EAP request
Tue Dec 27 22:31:56 2005: DEBUG: Packet dump:
*** Sending to 192.168.0.251 port 1316 ....
Code: Access-Reject
Identifier: 0
Authentic: .<137>K<246>N<217>]<182>L<176>%vz<254><17><228>
Attributes:
Reply-Message = "Could not handle an EAP request"
------- CONFIG -------
LogStdout
#Trace 3
Trace 4
LogDir /**/wlan
DictionaryFile /**/dictionary
BindAddress 192.168.0.253
<Client DEFAULT>
Secret airtunnel
</Client>
<AuthLog FILE>
Identifier authlog
Filename /**/authlog
LogSuccess 1
LogFailure 1
</AuthLog>
<Log FILE>
Identifier acelogger
Filename /**/radius.log
</Log>
<Handler TunnelledByPEAP=1>
RejectHasReason
AuthByPolicy ContinueWhileReject
Log acelogger
<AuthBy FILE>
Filename /**/users
EAPType MSCHAP-V2
</AuthBy>
AcctLogFileName /**/detail
AuthLog authlog
</Handler>
<Handler>
RejectHasReason
AuthByPolicy ContinueWhileReject
Log acelogger
<AuthBy FILE>
Filename /**/users
EAPType PEAP
EAPTLS_CAFile /**/certificates/demoCA/cacert.pem
EAPTLS_CertificateFile /**/certificates/cert-srv.pem
EAPTLS_CertificateType PEM
EAPTLS_PrivateKeyFile /**/certificates/cert-srv.pem
EAPTLS_PrivateKeyPassword whatever
EAPTLS_MaxFragmentSize 1000
AutoMPPEKeys
</AuthBy>
AcctLogFileName /**/detail
AuthLog authlog
</Handler>
-- Andrew
> -----Original Message-----
> From: owner-radiator at open.com.au [mailto:owner-radiator at open.com.au] On
> Behalf Of Hugh Irvine
> Sent: Thursday, 27 October 2005 4:06 PM
> To: andrewb at acenet.net.au
> Cc: radiator at open.com.au
> Subject: Re: (RADIATOR) Wireless Config
>
>
> Hello Andrew -
>
> As always, without a copy of your configuration file and a trace 4
> debug from Radiator showing what is happening it is impossible to say.
>
> At a guess there is some prerequisite missing - check the startup
> messages for details.
>
> regards
>
> Hugh
>
>
> On 27 Oct 2005, at 15:52, Andrew wrote:
>
> >
> > Hi All,
> >
> > I've just re-setup an AP with WPA/EAP (TKIP). Previously my
> > Radiator was
> > working ok (with this particular AP), but now I'm getting the
> > following
> > error.
> >
> > Can't locate object method "response_identity" via package
> > "Radius::EAP_25"
> >
> > I noticed also in the Authlog that the inner 'anonymous' auth isn't
> > occurring where previously it was. Does this has anything to do
> > with it?
> >
> > Anybody have any hints?
> >
> > -- Andrew
> >
> >
> > --
> > Archive at http://www.open.com.au/archives/radiator/
> > Announcements on radiator-announce at open.com.au
> > To unsubscribe, email 'majordomo at open.com.au' with
> > 'unsubscribe radiator' in the body of the message.
> >
>
>
> NB:
>
> Have you read the reference manual ("doc/ref.html")?
> Have you searched the mailing list archive (www.open.com.au/archives/
> radiator)?
> Have you had a quick look on Google (www.google.com)?
> Have you included a copy of your configuration file (no secrets),
> together with a trace 4 debug showing what is happening?
>
> --
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
> -
> CATool: Private Certificate Authority for Unix and Unix-like systems.
>
>
> --
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list