(RADIATOR) Simultaneous-Use problem

Zvika Shpitalnik zvikaus at macam.ac.il
Tue Mar 22 10:02:03 CST 2005


Hello, Hugh

I tried CiscoSessionMIB and I gave the same result

 On machine with snmpwalk v4.2 and perl v5.6.1 (ciscovpdn mode) its work fine,
the output of command /usr/bin/snmpwalk -c "*****" 192.114.206.206 is:

interfaces.ifTable.ifEntry.ifIndex.1 = 1
interfaces.ifTable.ifEntry.ifIndex.2 = 2
interfaces.ifTable.ifEntry.ifIndex.3 = 3
interfaces.ifTable.ifEntry.ifIndex.4 = 4
interfaces.ifTable.ifEntry.ifIndex.5 = 5
interfaces.ifTable.ifEntry.ifIndex.6 = 6
interfaces.ifTable.ifEntry.ifIndex.7 = 7
interfaces.ifTable.ifEntry.ifIndex.8 = 8
interfaces.ifTable.ifEntry.ifIndex.9 = 9
interfaces.ifTable.ifEntry.ifIndex.10 = 10
interfaces.ifTable.ifEntry.ifIndex.11 = 11
interfaces.ifTable.ifEntry.ifIndex.12 = 12
interfaces.ifTable.ifEntry.ifIndex.15 = 15
interfaces.ifTable.ifEntry.ifIndex.16 = 16
interfaces.ifTable.ifEntry.ifIndex.17 = 17
interfaces.ifTable.ifEntry.ifIndex.18 = 18
interfaces.ifTable.ifEntry.ifIndex.19 = 19
interfaces.ifTable.ifEntry.ifIndex.20 = 20
interfaces.ifTable.ifEntry.ifIndex.21 = 21
interfaces.ifTable.ifEntry.ifIndex.22 = 22
interfaces.ifTable.ifEntry.ifIndex.23 = 23
interfaces.ifTable.ifEntry.ifIndex.24 = 24
interfaces.ifTable.ifEntry.ifIndex.25 = 25
interfaces.ifTable.ifEntry.ifIndex.26 = 26
interfaces.ifTable.ifEntry.ifIndex.27 = 27
interfaces.ifTable.ifEntry.ifIndex.28 = 28
interfaces.ifTable.ifEntry.ifIndex.29 = 29
interfaces.ifTable.ifEntry.ifIndex.30 = 30
interfaces.ifTable.ifEntry.ifIndex.31 = 31
interfaces.ifTable.ifEntry.ifIndex.32 = 32
interfaces.ifTable.ifEntry.ifIndex.33 = 33
interfaces.ifTable.ifEntry.ifIndex.34 = 34
interfaces.ifTable.ifEntry.ifIndex.35 = 35
interfaces.ifTable.ifEntry.ifIndex.36 = 36
interfaces.ifTable.ifEntry.ifIndex.37 = 37
interfaces.ifTable.ifEntry.ifIndex.38 = 38
interfaces.ifTable.ifEntry.ifIndex.39 = 39

and so on...


on the other one with snmpwalk v5.1.1 and perl v5.8.3 (ciscovpdn mode) the 
output of command /usr/bin/snmpwalk -c "*****" 192.114.206.206 is: snmpwalk: 
No securityName specified

Radius version is 3.9

Thanks,

Zvika

  
 
--
Open WebMail Project (http://openwebmail.org)


---------- Original Message -----------
From: Hugh Irvine <hugh at open.com.au>
To: "Zvi Shpitalnik" <zvikaus at macam.ac.il>
Cc: <radiator at open.com.au>
Sent: Mon, 21 Mar 2005 22:43:59 +0100
Subject: Re: (RADIATOR) Simultaneous-Use problem

> Hello -
> 
> Rather than CiscoVPDN, I suggest you use CiscoSessionMIB and 
> configure the Cisco device to use the session MIB.
> 
> If you still have problems please send me a copy of your 
> configuration file and a trace 4 debug showing what is happening.
> 
> It would also be useful to see the output from snmpwalk 5.1.1 and 
> snmpwalk 4.2.
> 
> Could you also tell me what version of Perl you are using and what 
> version of Radiator.
> 
> BTW - Radiator 3.12 has just been released.
> 
> regards
> 
> Hugh
> 
> On 21 Mar 2005, at 09:45, Zvi Shpitalnik wrote:
> 
> >  ,Hi
> >
> >   
> >
> > I have a problem with -Simultaneous Use check in CHECKATTR and 
> > snmpwalk version by  5.1.1 net-snmp
> >
> >  
> >
> > In the log file I get this :message
> >
> >   
> >
> > Sun Mar 20 22:04:45 2005 :DEBUG Checking if user is still :online 
> > ,CiscoVPDN ,daliak at macam.ac.il ,192.114.206.206 ,14 0000EA87 
> > 192.114.209.193
> >
> > Sun Mar 20 22:04:45 2005 NOTICE: CiscoVPDN: Checking 
> > 192.114.206.206:14:daliak at macam.ac.il
> >
> > Sun Mar 20 22:04:45 2005 :DEBUG Running command `/usr/bin/snmpwalk  
> > "*****"-c 192.114.206.206 .1.3.6.1.2.1.2.2.1.2 1>&2 `
> >
> > Sun Mar 20 22:04:46 2005 INFO:  Session for daliak at macam.ac.il at 
> > 192.114.206.206:14 has gone away
> >
> > Sun Mar 20 22:04:46 2005 DEBUG:  Deleting session for 
> > daliak at macam.ac.il, 192.114.206.206, 14
> >
> > Sun Mar 20 22:04:46 2005 DEBUG: do query is: 'DELETE FROM RADONLINE 
> > WHERE NASIDENTIFIER = '192.114.206.206' AND NASPORT = '212';':
> >
> >  
> >
> > Sun Mar 20 22:04:46 2005 DEBUG: Radius::AuthSQL ACCEPT:
> >
> >  
> >
> > And the user get connected
> >
> >  
> >
> > When I running "/usr/bin/snmpwalk -c "*****" 192.114.206.206 
> > .1.3.6.1.2.1.2.2.1.2" from shell without "-v" flag, I receive this 
> > error: "snmpwalk: No securityName specified"
> >
> >  
> >
> >  
> >
> > The Radiator version that I use is 3.9 and it work with client NasType 
> > CiscoVPDN
> >
> >  
> >
> > P.S
> >
> >  With snmpwalk UCD-snmp version: 4.2 I haven't this problem
> >
> >  
> >
> >  
> >
> > Thanks in ,advance
> >
> >   
> >
> >  
> >
> >                Zvika Shpitalnik
> >
> > Mofet Institute Communication Center
> >
> >     Unix&Networking Team Leader
> >
> >      E-mail: zvikaus at macam.ac.il
> >
> >         Web: www.macam.ac.il
> >
> >          Tel:   +972 3 6901415
> >
> >         Mob: +972 50 7552656
> >
> >  
> >
> 
> NB: I am travelling this week, so there may be delays in our 
> correspondence.
> 
> -- 
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
> -
> CATool: Private Certificate Authority for Unix and Unix-like systems.
> 
> --
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
------- End of Original Message -------

--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.


More information about the radiator mailing list