(RADIATOR) Help setting up PEAP (with MSCHAP)
António Fernandes
afernandes at egp.up.pt
Thu Jun 23 03:49:18 CDT 2005
Hi Mike,
I'm sending as attachment.
Yours,
Antonio Fernandes
Oporto Management School
Oporto University
-----Original Message-----
From: Mike McCauley [mailto:mikem at open.com.au]
Sent: quarta-feira, 22 de Junho de 2005 23:13
To: António Fernandes
Cc: radiator at open.com.au
Subject: Re: (RADIATOR) Help setting up PEAP (with MSCHAP)
Hello António,
On Wednesday 22 June 2005 23:52, António Fernandes wrote:
> I'm very sorry for not seeing the difference :)
>
> I've changed like you said (AuthColumnDef 0, User-Password, check) and
also
> changed the <Handler Realm = /egp\.up\.pt.*/i>
> replacing
> EAPType TTLS, PEAP, TLS
> with
> EAPType PEAP, TTLS, TLS
> speeding Requests/Replies.
>
>
> It still performs as previously:
> Wed Jun 22 12:27:38 2005: DEBUG: Radius::AuthSQL ACCEPT:
> Wed Jun 22 12:27:38 2005: DEBUG: EAP result: 1, EAP MSCHAP-V2
> Authentication failure
I think its now time for you to send us a complete level 4 log file and
complete current configuration file.
Cheers.
>
>
> Yours,
>
> Antonio Fernandes
> Oporto Management School
> Oporto University
>
>
>
> -----Original Message-----
> From: Mike McCauley [mailto:mikem at open.com.au]
> Sent: quarta-feira, 22 de Junho de 2005 11:44
> To: António Fernandes
> Cc: 'Hugh Irvine'; radiator at open.com.au
> Subject: Re: (RADIATOR) Help setting up PEAP (with MSCHAP)
>
> Hello Antonio,
>
> On Wednesday 22 June 2005 19:46, António Fernandes wrote:
> > Hi Mike,
> >
> > I already did. My first iteration was what you suggested:
> > (near the end of the e-mail appears)
> >
> > > > AuthSelect SELECT NTLM, CONCAT(User,'@',Domain) AS
> > > > Username, VLAN
> > > > FROM users WHERE CONCAT(User,'@',Domain) = '%n' AND AccWiFi='1'
> > > > AuthColumnDef 0, Encrypted-Password, check
>
> For that you would need:
> AuthColumnDef 0, User-Password, check
>
> not Encrypted-Password.
> It should work fine.
>
> > but it still doesn't work.
> > I suspected (still do) that it has something to do with Challenge
> > process:
> >
> > 1 - Access-Request
> > 2 - Access-Challenge (it's "EAP TTLS Challenge")
> > 3 - Access-Request (switching to "EAP PEAP")
> > 4 - Access-Challenge (this time it's PEAP)
> > 5 - Access-Request
> > 6 - ......
>
> Hmm, have you sent us a complete log of that?
>
> > The strange part is that in the debug appears:
> > Radius::AuthSQL ACCEPT
> > but in the next line
> > EAP result: 1, EAP MSCHAP-V2 Authentication failure
> >
> > Thank you again Mike,
> >
> > Antonio Fernandes
> > Oporto Management School
> > Oporto University
> >
> >
> >
> >
> > -----Original Message-----
> > From: Mike McCauley [mailto:mikem at open.com.au]
> > Sent: terça-feira, 21 de Junho de 2005 23:55
> > To: António Fernandes
> > Cc: 'Hugh Irvine'; radiator at open.com.au
> > Subject: Re: (RADIATOR) Help setting up PEAP (with MSCHAP)
> >
> > Hello Antonio,
> >
> > I think the problem is that you have specified that the SQL nthash is to
>
> be
>
> > used as Encrypted-Password, but you have prefixed it with {nthash} as if
>
> it
>
> > were to be used as User-Password. If the passwords have {nthash} in
> > front, you should use User-Password like this:
> >
> > AuthColumnDef 0, User-Password, check
> >
> > Encryted-Pasword should only be used if there is no other indication
that
> > the
> > password is encrypted.
> >
> > Actually I would think it would be better if you had:
> >
> > AuthSelect SELECT NTLM,\
> > CONCAT(User,'@',Domain) AS Username, VLAN FROM users where\
> > CONCAT(User,'@',Domain)='%n' AND AccWiFi='1'
> > AuthColumnDef 0, Encrypted-Password, check
> >
> > and use the NTLM hash directly?
> > Your choice.
> >
> > Cheers.
> >
> > On Tuesday 21 June 2005 18:36, António Fernandes wrote:
> > > Hi Hugh,
> > >
> > > Thanks... I've done the changes but I can't seem to get it to work.
> > > Can you help me?
> > >
> > > Yours,
> > >
> > > Antonio Fernandes
> > > Oporto Management School
> > > Oporto University
> > >
> > >
> > >
> > >
> > > <AuthBy SQL>
> > > #identificador
> > > Identifier authby_MYSQL_PEAP_eu
> > > # No default
> > > NoDefault
> > > NoDefaultIfFound
> > > #EAP
> > > EAPType MSCHAP-V2
> > > EAPTLS_PEAPVersion 0
> > > # Definicao da BD
> > > DBSource dbi:mysql:EGP_Sistema:mysql.egp.up.pt
> > > DBUsername XXXXXXXX
> > > DBAuth XXXXXXXXX
> > > #SQL de acesso
> > > AuthSelect SELECT CONCAT('{nthash}',NTLM) AS NTLM,
> > > CONCAT(User,'@',Domain) AS Username, VLAN FROM users where
> > > CONCAT(User,'@',Domain)='%n' AND AccWiFi='1'
> > > AuthColumnDef 0, Encrypted-Password, check
> > > AuthColumnDef 1, User-Name, reply
> > > AuthColumnDef 2, Tunnel-Private-Group-ID, reply
> > > # Se nao tiver VLAN retorna para default
> > > AllowInReply Tunnel-Private-Group-ID
> > > AddToReplyIfNotExist Tunnel-Private-Group-ID = "1:5"
> > > AddToReply Tunnel-Type = "1:VLAN",
> > > Tunnel-Medium-Type = "1:Ether_802"
> > > # Only one session per user at a time
> > > DefaultSimultaneousUse 1
> > > </AuthBy>
> > > <Handler TunnelledByPEAP=1>
> > > RewriteUsername s/^([^@]+).*/$1/
> > > UsernameCharset a-zA-Z0-9\._\@-
> > > SessionDatabase NULL
> > > AuthByPolicy ContinueUntilAccept
> > > AuthBy authby_MYSQL_PEAP_eu
> > > # <AuthBy FILE>
> > > # RewriteUsername s/^([^@]+).*/$1/
> > > # Filename /etc/radiator/users_OK
> > > # EAPType MSCHAP-V2
> > > # AddToReply User-Name=%u
> > > # </AuthBy>
> > > AuthLog log_LocalUsers
> > > </Handler>
> > > <Handler Realm = /egp\.up\.pt.*/i>
> > > # Stripoff de realm
> > > RewriteUsername s/^([^@]+).*/$1/
> > > SessionDatabase NULL
> > > MaxSessions 1
> > > AuthByPolicy ContinueUntilAccept
> > > <AuthBy FILE>
> > > EAPType TTLS, PEAP, TLS
> > > EAPTLS_CAFile /etc/radiator/certEGP/EGP-ROOT-CA.crt
> > > EAPTLS_CertificateFile
>
> /etc/radiator/certEGP/radiator.pem
>
> > > EAPTLS_CertificateType PEM
> > > EAPTLS_PrivateKeyFile
> > > /etc/radiator/certEGP/radiator.pem EAPTLS_PrivateKeyPassword
XXXXXXXXXX
> > > EAPTLS_MaxFragmentSize 1000
> > > AutoMPPEKeys
> > > SSLeayTrace 4
> > > </AuthBy>
> > > <Log SYSLOG>
> > > Facility radius
> > > </Log>
> > > </Handler>
> > >
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Hugh Irvine [mailto:hugh at open.com.au]
> > > Sent: sábado, 18 de Junho de 2005 15:06
> > > To: António Fernandes
> > > Cc: radiator at open.com.au
> > > Subject: Re: (RADIATOR) Help setting up PEAP (with MSCHAP)
> > >
> > >
> > > Hello Antonio -
> > >
> > > Radiator supports NT hash passwords with a prefix of "{nthash}".
> > >
> > > See section 13.1.1 in the Radiator 3.13 reference manual ("doc/
> > > ref.html").
> > >
> > > regards
> > >
> > > Hugh
> > >
> > > On 18 Jun 2005, at 19:46, António Fernandes wrote:
> > > > I'm currently using Radiator for wireless authentication (EAP-TTLS)
> > > > using
> > > > SecureW2 in WinXP SP2. Since the beginning I would also like to add
> > > > PEAP
> > > > using MSCHAP. The problem with MSCHAP comes with the need of clear
> > > > text
> > > > passwords. Recently I've came across with a FreeRadius
> > > > implementation that
> > > > allows to do MSCHAP authentication using NTLM style passwords (NT/LM
> > > > hashes). I understand that NTLM are reversible and if so, it should
> > > > work
> > > > also with Radiator?
> > > >
> > > > Is this possible with Radiator? I tried to get passwords from the
> > > > MySQL with
> > > > no success. When the password is in plain text it works fine but
> > > > when I
> > > > change it to NTLM it rejects...
> > > >
> > > > Any ideas?
> > > >
> > > >
> > > > Yours,
> > > >
> > > > Antonio Fernandes
> > > > Oporto Management School
> > > > Oporto University
> > > >
> > > >
> > > >
> > > >
> > > > Config:
> > > > <AuthBy SQL>
> > > > #identifier
> > > > Identifier authby_MYSQL_PEAP_eu
> > > > # No default
> > > > NoDefault
> > > > NoDefaultIfFound
> > > > #EAP
> > > > EAPType MSCHAP-V2
> > > > # DB
> > > > DBSource dbi:mysql:XXXXX:XXXXXX
> > > > DBUsername XXXXXX
> > > > DBAuth XXXXXXX
> > > > # SQL
> > > > AuthSelect SELECT NTLM, CONCAT(User,'@',Domain) AS
> > > > Username, VLAN
> > > > FROM users WHERE CONCAT(User,'@',Domain) = '%n' AND AccWiFi='1'
> > > > AuthColumnDef 0, Encrypted-Password, check
> > > > AuthColumnDef 1, User-Name, reply
> > > > AuthColumnDef 2, Tunnel-Private-Group-ID, reply
> > > > AddToReply Tunnel-Type = "1:VLAN", Tunnel-Medium-Type =
> > > > "1:Ether_802"
> > > > # Only one session per user at a time
> > > > DefaultSimultaneousUse 1
> > > > </AuthBy>
> > > > <Handler TunnelledByPEAP=1, Client-Identifier=LocaL>
> > > > UsernameCharset a-zA-Z0-9\._\@-
> > > > SessionDatabase NULL
> > > > AuthBy authby_MYSQL_PEAP_eu
> > > > </Handler>
> > > > <Handler Realm = /egp\.up\.pt.*/i>
> > > > # Stripoff de realm
> > > > RewriteUsername s/^([^@]+).*/$1/
> > > >
> > > > SessionDatabase NULL
> > > >
> > > > MaxSessions 1
> > > > <AuthBy FILE>
> > > > EAPType TTLS, PEAP, TLS
> > > > EAPTLS_CAFile /etc/radiator/certEGP/EGP-ROOT-CA.crt
> > > > EAPTLS_CertificateFile /etc/radiator/certEGP/
> > > > radiator.pem
> > > > EAPTLS_CertificateType PEM
> > > > EAPTLS_PrivateKeyFile /etc/radiator/certEGP/
> > > > radiator.pem
> > > > EAPTLS_PrivateKeyPassword XXXXXXXXXXXX
> > > > EAPTLS_MaxFragmentSize 1000
> > > > AutoMPPEKeys
> > > > SSLeayTrace 4
> > > > </AuthBy>
> > > > <Log SYSLOG>
> > > > Facility radius
> > > > </Log>
> > > > </Handler>
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Snipet.... (http://forum.chupa.nl/showthread.php?t=1141&page=3)
> > > >
> > > > passwd etc_smbpasswd_with_domain {
> > > > filename = /opt/etc/smbpasswd
> > > > format = "*Stripped-User-Name:NT-Password"
> > > > authtype = MS-CHAP
> > > > hashsize = 100
> > > > ignorenislike = no
> > > > allowmultiplekeys = no
> > > > }
> > > >
> > > > My "smbpasswd" (far from it now) looks like this:
> > > > # Sample smbpasswd file.
> > > > # To use this, set 'encrypt passwords = yes' in the [global]-section
> > > > # of /etc/smb.conf
> > > > Tommy:NTLMPASS
> > > > Connie:NTLMPASS
> > > > PocketPC:NTLMPASS
> > >
> > > NB: I am travelling this week, so there may be delays in our
> > > correspondence.
--
Mike McCauley mikem at open.com.au
Open System Consultants Pty. Ltd Unix, Perl, Motif, C++, WWW
9 Bulbul Place Currumbin Waters QLD 4223 Australia http://www.open.com.au
Phone +61 7 5598-7474 Fax +61 7 5598-7070
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
TTLS, PEAP etc on Unix, Windows, MacOS etc.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PEAP Trouble.zip
Type: application/x-zip-compressed
Size: 6091 bytes
Desc: not available
URL: <http://www.open.com.au/pipermail/radiator/attachments/20050623/b38e3953/attachment.bin>
More information about the radiator
mailing list