(RADIATOR) Private Attribute radius

Hugh Irvine hugh at open.com.au
Tue Jan 4 16:03:01 CST 2005


Hello Julio -

My comments are the same as before - I can't understand how vendor 4846 
can be reported as 529.

Note also that the lengths have been "fixed" to show the length of the 
value only, not what is contained in the packet which is the length of 
the overall attribute-length-value tuple (as specified by the RFC - see 
"doc/rfc2865.txt").

The reason for my criticism is that there are already two different 
sets of Ascend attributes - one in the RFC space and one in the 529 
vendor-specific space. Now there will be a _third_ set of Ascend 
attributes in the 4846 vendor-specific space - this is very poor 
practice on the part of the vendor.

regards

Hugh


On 5 Jan 2005, at 03:02, Julio Cesar Pinto wrote:

> Hi Hugh,
>
> The test with 16-bit-vendor-specific showed us the following:
>
> Radiator.
> *** Received from 216.241.0.70 port 7008 ....
>
> Packet length = 97
> 01 37 00 61 b9 6b 0c 9d 80 b7 ab 2b 14 53 8f 68
> 10 fb 88 8e 01 04 6a 63 02 12 39 0b 47 ae dc 96
> e7 88 dd 36 de 6a 2b 09 8f bf 04 06 d8 f1 00 46
> 20 12 54 4e 54 54 45 53 54 2e 69 66 78 6e 77 2e
> 63 6c 05 06 00 00 00 00 1a 0d 00 00 12 ee 00 0d
> 07 00 00 00 00 3d 06 00 00 00 05 06 06 00 00 00
> 01
> Code:       Access-Request
> Identifier: 55
> Authentic:
> <185>k<12><157><128><183><171>+<20>S<143>h<16><251><136><142>
> Attributes:
>         User-Name = "jc"
>         User-Password =
> "9<11>G<174><220><150><231><136><221>6<222>j+<9><143><191>"
>         NAS-IP-Address = 216.241.0.70
>         NAS-Identifier = "TNTTEST.ifxnw.cl"
>         NAS-Port = 0
>         NAS-Port-Type = Virtual
>         Service-Type = Login-User
>
> Tue Jan  4 10:58:30 2005: DEBUG: Handling request with Handler
> 'NAS-IP-Address=216.241.0.70'
> Tue Jan  4 10:58:30 2005: DEBUG: SDB1 Deleting session for jc,
> 216.241.0.70, 0
> Tue Jan  4 10:58:30 2005: DEBUG: do query is: 'delete from RADONLINE
> where NASIDENTIFIER='216.241.0.70' and NASPORT=00':
>
> Tue Jan  4 10:58:30 2005: DEBUG: Handling with AuthINTERNAL:
> Tue Jan  4 10:58:30 2005: DEBUG: Access accepted for jc
> Tue Jan  4 10:58:30 2005: DEBUG: Packet dump:
> *** Sending to 216.241.0.70 port 7008 ....
>
> Packet length = 67
> 02 37 00 43 c9 26 ba 8f f2 01 e1 2e 4e 16 78 9e
> b7 22 65 e9 07 06 00 00 00 01 1a 1c 00 00 12 ee
> 01 1f 16 68 74 74 70 3a 2f 2f 32 31 36 2e 32 34
> 31 2e 31 2e 33 30 1a 0d 00 00 12 ee 01 20 07 00
> 00 00 50
> Code:       Access-Accept
> Identifier: 55
> Authentic:
> <185>k<12><157><128><183><171>+<20>S<143>h<16><251><136><142>
> Attributes:
>         Framed-Protocol = PPP
>         Ascend-HTTP-Redirect-URL = "http://216.241.1.30"
>         Ascend-HTTP-Redirect-Port = 80
>
> NAS.
>
> RADIF: radius type Auth ID = 55
> RADIF: authenticating <2:jc> with PAP
> RADIF 20:04:31> _radiusRequest: id 55, user name <2:jc>
> RADIF: _radiusReq: socket 6015 len 97 ipaddr 200.62.3.102 port
> 65534->1645
> RADIF:_radiusReq: id 55 <2:jc>, starting timer (60 sec)
> ...radauth request queued, awaiting response
> admin> RADIF: _radCallback: entering...
> _receivedResponse :1, addrPoolAcked : 0
> RADIF: _radCallback: buf=14754d20 from 200.62.3.102 1645
> RADIF: _radCallback:  authcode 2, id 55, killing timer
> RADIF: Authentication Ack
> RADIF: vendor 0 attr 7, len 4, 00 00 00 01
> RADIF: vendor 529 attr 287, len 19, 68 74 74 70 3a 2f 2f 32
> RADIF: vendor 529 attr 288, len 4, 00 00 00 50
> RADIF: RI_EapMsg: collapse - info=14774040  msg=0
> Disposing of tunnel info object 14760850.
> radauth: 2
> RADIF:_freeInfoClassSess
>
> Let me know your comments,
>
> JC.
>
>
> -----Original Message-----
> From: Hugh Irvine [mailto:hugh at open.com.au]
> Sent: Monday, January 03, 2005 6:30 PM
> To: Julio Cesar Pinto
> Cc: radiator at open.com.au
> Subject: Re: (RADIATOR) Private Attribute radius
>
>
> Hello Julio -
>
> Well this is just plain wrong.
>
> Here is the debug showing what was sent:
>
>>
>> Packet length = 87
>> 02 15 00 57 75 fd 2e 0a c8 34 2e 3d 40 23 85 39
>> 2d 14 7a 8f 07 06 00 00 00 01 1a 1e 00 00 12 ee
>> 01 1f 18 68 74 74 70 3a 2f 2f 61 74 6c 61 73 2e
>> 69 66 78 6e 77 2e 63 6c 87 06 d8 f1 00 85 88 06
>> d8 f1 00 97 1b 06 00 00 0e 10 1a 0d 00 00 12 ee
>> 01 20 07 00 00 00 50
>> Code:       Access-Accept
>> Identifier: 21
>> Authentic:  <192>i.<171>'<130><14>Q<182>e<171><14><157>s<193><205>
>> Attributes:
>>         Framed-Protocol = PPP
>>         Ascend-HTTP-Redirect-URL = "http://atlas.ifxnw.cl"
>>         Ascend-Client-Primary-DNS = 216.241.0.133
>>         Ascend-Client-Secondary-DNS = 216.241.0.151
>>         Session-Timeout = 3600
>>         Ascend-HTTP-Redirect-Port = 80
>
> The relevant debug is this (one example):
>
>> ...... 1a 0d 00 00 12 ee
>> 01 20 07 00 00 00 50
>
> 1a = 26 = vendor-specific
>
> 0d = 13 = length overall
>
> 00 00 12 ee = 4846 = vendor code (_not_ 529)
>
> 01 20 = 288 = attribute number (16 bits)
>
> 07 = 7 = vendor-specific length
>
> 00 00 00 50 = 80 = value of the attribute
>
>
> What happens if you specify option 3 in the MaxTNT configuration?
>
>
> Please let me know what the vendor says about all of this.
>
> regards
>
> Hugh
>
>
> On 4 Jan 2005, at 02:40, Julio Cesar Pinto wrote:
>
>> Hi Hugh,
>>
>> We're using MaxTNT with TAOS 11, and radiator version 3.9.
>>
>> The MaxTNT have the following kind of compatibility attributes:
>> 1. old-ascend
>> 2. vendor-specific
>> 3. 16-bit-vendor-specific
>>
>> I used the number 2.
>>
>> Well, as you know I used in the dictionary the code 4846, but the
>> output
>> in the NAS is the following:
>>
>> RADIF: vendor 529 attr 287, len 19, 68 74 74 70 3a 2f 2f 32
>> RADIF: vendor 0 attr 135, len 4, c8 3e 03 03
>> RADIF: vendor 0 attr 136, len 4, c8 3e 03 03
>> RADIF: vendor 0 attr 242, len 24, 01 01 01 00 00 00 00 00
>> RADIF: vendor 0 attr 27, len 4, 00 00 0e 10
>> RADIF: vendor 529 attr 288, len 4, 00 00 00 50
>>
>> As you see, the NAS received the attributes like 529.
>>
>> I page you a debug log. I expect that this can help you.
>>
>> *** Received from 216.241.0.70 port 7001 ....
>>
>> Packet length = 128
>> 01 15 00 80 c0 69 2e ab 27 82 0e 51 b6 65 ab 0e
>> 9d 73 c1 cd 01 09 66 72 69 76 61 73 00 02 09 b6
>> 43 87 4f 51 ce 33 04 06 d8 f1 00 46 20 12 54 4e
>> 54 54 45 53 54 2e 69 66 78 6e 77 2e 63 6c 05 06
>> 00 00 24 04 3d 06 00 00 00 00 06 06 00 00 00 02
>> 07 06 00 00 00 01 18 02 1f 0a 32 33 37 34 32 35
>> 38 33 1e 06 38 38 30 30 2c 0c 34 37 32 33 33 35
>> 33 36 34 00 c5 06 00 00 79 e0 ff 06 00 00 ab e0
>> Code:       Access-Request
>> Identifier: 21
>> Authentic:  <192>i.<171>'<130><14>Q<182>e<171><14><157>s<193><205>
>> Attributes:
>>         User-Name = "frivas"
>>         User-Password = "<182>C<135>OQ<206>3"
>>         NAS-IP-Address = 216.241.0.70
>>         NAS-Identifier = "TNTTEST.ifxnw.cl"
>>         NAS-Port = 9220
>>         NAS-Port-Type = Async
>>         Service-Type = Framed-User
>>         Framed-Protocol = PPP
>>         State = ""
>>         Calling-Station-Id = "23742583"
>>         Called-Station-Id = "8800"
>>         Acct-Session-Id = "472335364"
>>         Ascend-Data-Rate = 31200
>>         Ascend-Xmit-Rate = 44000
>>
>> Thu Dec 30 09:59:55 2004: DEBUG: Handling request with Handler
>> 'NAS-IP-Address=216.241.0.70'
>> Thu Dec 30 09:59:55 2004: DEBUG: SDB1 Deleting session for frivas,
>> 216.241.0.70, 9220
>> Thu Dec 30 09:59:55 2004: DEBUG: do query is: 'delete from RADONLINE
>> where NASIDENTIFIER='216.241.0.70' and NASPORT=09220':
>> Thu Dec 30 09:59:56 2004: DEBUG: Handling with AuthINTERNAL:
>> Thu Dec 30 09:59:56 2004: DEBUG: Access accepted for frivas
>> Thu Dec 30 09:59:56 2004: DEBUG: Packet dump:
>> *** Sending to 216.241.0.70 port 7001 ....
>>
>> Packet length = 87
>> 02 15 00 57 75 fd 2e 0a c8 34 2e 3d 40 23 85 39
>> 2d 14 7a 8f 07 06 00 00 00 01 1a 1e 00 00 12 ee
>> 01 1f 18 68 74 74 70 3a 2f 2f 61 74 6c 61 73 2e
>> 69 66 78 6e 77 2e 63 6c 87 06 d8 f1 00 85 88 06
>> d8 f1 00 97 1b 06 00 00 0e 10 1a 0d 00 00 12 ee
>> 01 20 07 00 00 00 50
>> Code:       Access-Accept
>> Identifier: 21
>> Authentic:  <192>i.<171>'<130><14>Q<182>e<171><14><157>s<193><205>
>> Attributes:
>>         Framed-Protocol = PPP
>>         Ascend-HTTP-Redirect-URL = "http://atlas.ifxnw.cl"
>>         Ascend-Client-Primary-DNS = 216.241.0.133
>>         Ascend-Client-Secondary-DNS = 216.241.0.151
>>         Session-Timeout = 3600
>>         Ascend-HTTP-Redirect-Port = 80
>>
>> Regards,
>>
>> JC.
>>
>> -----Original Message-----
>> From: owner-radiator at open.com.au [mailto:owner-radiator at open.com.au]
> On
>> Behalf Of Hugh Irvine
>> Sent: Friday, December 31, 2004 5:12 PM
>> To: Julio Cesar Pinto
>> Cc: radiator at open.com.au
>> Subject: Re: (RADIATOR) Private Attribute radius
>>
>>
>> Hello Julio -
>>
>> Thanks very much for the information.
>>
>> Could you please tell me exactly what NAS equipment you are using
>> (hardware and software versions) and what version of vendor-specific
>> attributes you are using? Better yet, could you please send me a trace
>> 5 debug showing the attribute dumps?
>>
>> The reason I ask this is because the attribute definitions I sent you
>> (see below) are in a special "Lucent" format (vendor 4846) rather than
>> in the standard "Ascend" format (vendor 529).
>>
>> thanks and regards
>>
>> Hugh
>>
>>
>> On 1 Jan 2005, at 03:14, Julio Cesar Pinto wrote:
>>
>>> Hi Hugh,
>>>
>>> At the moment we solved the problem, the solution was to modify in
> the
>>> NAS the compatibility with radius in the external profile.
>>>
>>> By default the NAS have old-ascend we change it to vendor-specific
> and
>>> work very well.
>>>
>>> Thanks a lot for your help,
>>>
>>> Greetings and Happy New Year,
>>>
>>> JC.
>>>
>>> -----Original Message-----
>>> From: owner-radiator at open.com.au [mailto:owner-radiator at open.com.au]
>> On
>>> Behalf Of Julio Cesar Pinto
>>> Sent: Wednesday, December 29, 2004 6:32 PM
>>> To: Hugh Irvine
>>> Cc: radiator at open.com.au
>>> Subject: RE: (RADIATOR) Private Attribute radius
>>>
>>> Hi Hugh,
>>>
>>> Very interesting, I see the correct attribute in the log trace 5.
>>>
>>> LOG.
>>>
>>> *** Sending to 216.241.0.70 port 7007 ....
>>>
>>> Packet length = 67
>>> 02 69 00 43 08 71 cf 80 7b 4d 4a da 00 7f c4 13
>>> 5f 49 9b d8 07 06 00 00 00 01 1a 1c 00 00 12 ee
>>> 01 1f 16 68 74 74 70 3a 2f 2f 32 31 36 2e 32 34
>>> 31 2e 31 2e 33 30 1a 0d 00 00 12 ee 01 20 07 00
>>> 00 00 50
>>> Code:       Access-Accept
>>> Identifier: 105
>>> Authentic:  <149><153><199><245>D<207>x<253><243>;N
> <30><132><211><22>
>>> Attributes:
>>>         Framed-Protocol = PPP
>>>         Ascend-HTTP-Redirect-URL = "http://216.241.1.30"
>>>         Ascend-HTTP-Redirect-Port = 80
>>>
>>> I'm going to discuses this with the support of Lucent, I will page
> you
>>> when we solve this problems.
>>>
>>> Thanks a lot,
>>>
>>> JC.
>>>
>>> -----Original Message-----
>>> From: Hugh Irvine [mailto:hugh at open.com.au]
>>> Sent: Wednesday, December 29, 2004 4:55 PM
>>> To: Julio Cesar Pinto
>>> Cc: radiator at open.com.au
>>> Subject: Re: (RADIATOR) Private Attribute radius
>>>
>>>
>>> Hello Julio -
>>>
>>> The attribute definitions as shown in the URL you sent me and in the
>>> definitions I sent to you _are_ vendor-specifics.
>>>
>>> If you look at a trace 4 debug from Radiator (or radpwtst) you should
>>> see the correct attribute name.
>>>
>>> You will need to check with your NAS vendor how to use the attributes
>>> with RADIUS.
>>>
>>> If you could send me a trace 5 debug from Radiator showing the
>>> attributes in the reply I will verify the encoding.
>>>
>>> regards
>>>
>>> Hugh
>>>
>>>
>>> On 30 Dec 2004, at 08:12, Julio Cesar Pinto wrote:
>>>
>>>> Hi Hugh,
>>>>
>>>> It doesn't work :(
>>>>
>>>> I did a radstock, and the packet show me the following:
>>>>
>>>> Request (62) - 216.241.0.70:7007 -> 200.62.3.98:1812 (L124)
>>>>   User-Name             Len  6  "fgf*"
>>>>   User-Password         Len  8  "****|*"
>>>>   NAS-IP-Address        Len  6  216.241.0.70
>>>>   NAS-Identifier        Len 18  "TNTTEST.ifxnw.cl"
>>>>   NAS-Port              Len  6  9228
>>>>   NAS-Port-Type         Len  6  Async
>>>>   Service-Type          Len  6  Framed-User
>>>>   Framed-Protocol       Len  6  PPP
>>>>   State                 Len  2  ""
>>>>   Calling-Station-Id    Len 10  "25596126"
>>>>   Called-Station-Id     Len  6  "8800"
>>>>   Acct-Session-Id       Len 12  "472335283*"
>>>>   Calling-Station-Id    Len 10  "27582762"
>>>>   Called-Station-Id     Len  6  "8800"
>>>>   Ascend-Data-Svc       Len  6  Switched-Voice-Bearer
>>>> Acc-Ack (30) - 216.241.0.70:7006 <- 200.62.3.97:1813 (L67)
>>>>   Framed-Protocol       Len  6  PPP
>>>>   Vendor-Specific       Len 28  "*******http://216.241.1.30"
>>>>   Vendor-Specific       Len 13  "***** ****P"
>>>>
>>>> As you see the fields are show as Vendor-Specific, I'm using another
>>>> attributes like:
>>>>
>>>> ATTRIBUTE       Ascend-Client-Primary-DNS       135     ipaddr
>>>> ATTRIBUTE       Ascend-Client-Secondary-DNS     136     ipaddr
>>>> ATTRIBUTE       Ascend-Client-Assign-DNS        137     integer
>>>> ATTRIBUTE       Ascend-Data-Filter              242     abinary
>>>>
>>>> And this attribute in the radstock are show it with the same value
>>> that
>>>> the dictionary, keep in mind that the radstock use the same
>> dictionary
>>>> that I use in the radiators process.
>>>>
>>>> I know that this feature is working ok, because we implement a local
>>>> user into the NAS with the redirection parameter and work very well.
>>>>
>>>> I appreciate your comments in the matter.
>>>>
>>>> Thanks a lot,
>>>>
>>>> JC.
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Hugh Irvine [mailto:hugh at open.com.au]
>>>> Sent: Tuesday, December 28, 2004 5:40 PM
>>>> To: Julio Cesar Pinto
>>>> Cc: radiator at open.com.au
>>>> Subject: Re: (RADIATOR) Private Attribute radius
>>>>
>>>>
>>>> Hello Julio -
>>>>
>>>> Thanks for the URL.
>>>>
>>>> You should be able to add the following to the standard Radiator
> 3.11
>>>> dictionary:
>>>>
>>>> VENDORATTR      4846     Ascend-Http-Redirect-URL                287
>>>>   string
>>>> VENDORATTR      4846     Ascend-Http-Redirect-Port
>> 288
>>>>     integer
>>>>
>>>> Please let me know whether or not they work correctly.
>>>>
>>>> I will then consider what to do about adding them to the standard
>>>> dictionary.
>>>>
>>>> regards
>>>>
>>>> Hugh
>>>>
>>>>
>>>> On 29 Dec 2004, at 01:01, Julio Cesar Pinto wrote:
>>>>
>>>>> Hi Hugh,
>>>>>
>>>>> I found the attributes in the following page
>>>>>
>>>>> http://www.lucentradius.com/dcforum/User_files/3dd2be19328291e9.txt
>>>>>
>>>>> You could see that this page management the information about Navis
>>>>> Soft.
>>>>>
>>>>> So, according whit this information the official definitions are:
>>>>>
>>>>> ATTRIBUTE       Ascend-Http-Redirect-URL                287
>>> string
>>>>> Lucent
>>>>> ATTRIBUTE       Ascend-Http-Redirect-Port               288
>>>> integer
>>>>> Lucent
>>>>>
>>>>> Let me know your comments,
>>>>>
>>>>> Thanks,
>>>>>
>>>>> JC.
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Hugh Irvine [mailto:hugh at open.com.au]
>>>>> Sent: Monday, December 27, 2004 6:09 PM
>>>>> To: Julio Cesar Pinto
>>>>> Cc: radiator at open.com.au
>>>>> Subject: Re: (RADIATOR) Private Attribute radius
>>>>>
>>>>>
>>>>> Hello Julio -
>>>>>
>>>>> What are the "official" definitions for these attributes?
>>>>>
>>>>> Normally the definitions would look like this, but from the code I
>>>>> think there is the same restriction of less than 255 for these
>>>>> attributes too (see "Radius/Radius.pm->sub pack()) so I don't think
>>>>> they will work.
>>>>>
>>>>>
>>>>> VENDORATTR      529     Ascend-HTTP-Redirect-URL                287
>>>>> string
>>>>> VENDORATTR      529     Ascend-HTTP-Redirect-Port
>> 288
>>>>>    integer
>>>>>
>>>>>
>>>>> Please let me know what you discover for the "official" attributes.
>>>>>
>>>>> regards
>>>>>
>>>>> Hugh
>>>>>
>>>>>
>>>>> On 28 Dec 2004, at 08:40, Julio Cesar Pinto wrote:
>>>>>
>>>>>> Hugh,
>>>>>>
>>>>>> I appreciate your help in this doubt, thanks a lot.
>>>>>>
>>>>>> Working in a new project we need to use the following attributes:
>>>>>> Ascend-HTTP-Redirect-URL
>>>>>> Ascend-HTTP-Redirect-Port
>>>>>>
>>>>>> This attributes don't exist in the radiator dictionary, so I added
>>>>> this
>>>>>> by hand in the following way:
>>>>>>
>>>>>> ATTRIBUTE       Ascend-HTTP-Redirect-URL        287     string
>>>>>> ATTRIBUTE       Ascend-HTTP-Redirect-Port       288     integer
>>>>>>
>>>>>> Anyway I received the following message in the logs:
>>>>>>
>>>>>> Mon Dec 27 16:33:46 2004: WARNING: Invalid reply item
>>>>>> Ascend-HTTP-Redirect-URL ignored
>>>>>> Mon Dec 27 16:33:46 2004: WARNING: Invalid reply item
>>>>>> Ascend-HTTP-Redirect-Port ignored
>>>>>>
>>>>>> What is the correct way to add this attributes, into the 529
>>> vendor?.
>>>>>>
>>>>>> Let me know your comments,
>>>>>>
>>>>>> Thanks in advantage,
>>>>>>
>>>>>> JC.
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Hugh Irvine [mailto:hugh at open.com.au]
>>>>>> Sent: Wednesday, December 22, 2004 10:29 PM
>>>>>> To: Julio Cesar Pinto
>>>>>> Cc: radiator at open.com.au
>>>>>> Subject: Re: (RADIATOR) Private Attribute radius
>>>>>>
>>>>>>
>>>>>> Hello Julio -
>>>>>>
>>>>>> Radius attributes are encoded into an 8 bit field - hence are
>>> limited
>>>>>> to 255 and below.
>>>>>>
>>>>>> We provide the OSC-AVPAIR attribute that can be used in any way
> you
>>>>>> wish.
>>>>>>
>>>>>> 	AddToReply OSC-AVPAIR = "Test=123, Conn-Stat=active,
>>>>>> Visp-Id=whatever,
>>>>>> ....."
>>>>>>
>>>>>> If you want to define your own "official" attributes you should
>>> apply
>>>>>> for your own vendor number from IANA.
>>>>>>
>>>>>> 	http://www.iana.org/cgi-bin/enterprise.pl
>>>>>>
>>>>>> regards
>>>>>>
>>>>>> Hugh
>>>>>>
>>>>>>
>>>>>> On 23 Dec 2004, at 11:30, Julio Cesar Pinto wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I would like to know, if is possible include in my dictionary a
>>>>>> private
>>>>>>> attribute. Something likes that:
>>>>>>>
>>>>>>> ATTRIBUTE       Test                689             integer
>>>>>>> ATTRIBUTE       Conn-Stat		690             integer
>>>>>>> ATTRIBUTE       Visp-Id   		691             string
>>>>>>> ATTRIBUTE       Country-Id          692             string
>>>>>>>
>>>>>>> I know that I can :) the machine is my slave, but the idea is
> that
>>>>>>> these
>>>>>>> attribute to be recognized by radiator, because at the moment I
>>>>>> receive
>>>>>>> the following error:
>>>>>>>
>>>>>>> Wed Dec 22 18:28:33 2004: WARNING: Invalid reply item Visp-Id
>>>> ignored
>>>>>>> Wed Dec 22 18:28:33 2004: WARNING: Invalid reply item Country-Id
>>>>>>> ignored
>>>>>>>
>>>>>>> When the packet pass through AuthBy RADIUS
>>>>>>>
>>>>>>> I appreciate any comments.
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> JC.
>>>>>>>
>>>>>>> --
>>>>>>> Archive at http://www.open.com.au/archives/radiator/
>>>>>>> Announcements on radiator-announce at open.com.au
>>>>>>> To unsubscribe, email 'majordomo at open.com.au' with
>>>>>>> 'unsubscribe radiator' in the body of the message.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> NB:
>>>>>>
>>>>>> Have you read the reference manual ("doc/ref.html")?
>>>>>> Have you searched the mailing list archive
>>>>>> (www.open.com.au/archives/radiator)?
>>>>>> Have you had a quick look on Google (www.google.com)?
>>>>>> Have you included a copy of your configuration file (no secrets),
>>>>>> together with a trace 4 debug showing what is happening?
>>>>>>
>>>>>> -- 
>>>>>> Radiator: the most portable, flexible and configurable RADIUS
>> server
>>>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>>>>> -
>>>>>> Nets: internetwork inventory and management - graphical,
>> extensible,
>>>>>> flexible with hardware, software, platform and database
>>> independence.
>>>>>> -
>>>>>> CATool: Private Certificate Authority for Unix and Unix-like
>>> systems.
>>>>>>
>>>>>>
>>>>>
>>>>> NB:
>>>>>
>>>>> Have you read the reference manual ("doc/ref.html")?
>>>>> Have you searched the mailing list archive
>>>>> (www.open.com.au/archives/radiator)?
>>>>> Have you had a quick look on Google (www.google.com)?
>>>>> Have you included a copy of your configuration file (no secrets),
>>>>> together with a trace 4 debug showing what is happening?
>>>>>
>>>>> -- 
>>>>> Radiator: the most portable, flexible and configurable RADIUS
> server
>>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>>>> -
>>>>> Nets: internetwork inventory and management - graphical,
> extensible,
>>>>> flexible with hardware, software, platform and database
>> independence.
>>>>> -
>>>>> CATool: Private Certificate Authority for Unix and Unix-like
>> systems.
>>>>>
>>>>>
>>>>
>>>> NB:
>>>>
>>>> Have you read the reference manual ("doc/ref.html")?
>>>> Have you searched the mailing list archive
>>>> (www.open.com.au/archives/radiator)?
>>>> Have you had a quick look on Google (www.google.com)?
>>>> Have you included a copy of your configuration file (no secrets),
>>>> together with a trace 4 debug showing what is happening?
>>>>
>>>> -- 
>>>> Radiator: the most portable, flexible and configurable RADIUS server
>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>>> -
>>>> Nets: internetwork inventory and management - graphical, extensible,
>>>> flexible with hardware, software, platform and database
> independence.
>>>> -
>>>> CATool: Private Certificate Authority for Unix and Unix-like
> systems.
>>>>
>>>>
>>>
>>> NB:
>>>
>>> Have you read the reference manual ("doc/ref.html")?
>>> Have you searched the mailing list archive
>>> (www.open.com.au/archives/radiator)?
>>> Have you had a quick look on Google (www.google.com)?
>>> Have you included a copy of your configuration file (no secrets),
>>> together with a trace 4 debug showing what is happening?
>>>
>>> -- 
>>> Radiator: the most portable, flexible and configurable RADIUS server
>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>> -
>>> Nets: internetwork inventory and management - graphical, extensible,
>>> flexible with hardware, software, platform and database independence.
>>> -
>>> CATool: Private Certificate Authority for Unix and Unix-like systems.
>>>
>>> --
>>> Archive at http://www.open.com.au/archives/radiator/
>>> Announcements on radiator-announce at open.com.au
>>> To unsubscribe, email 'majordomo at open.com.au' with
>>> 'unsubscribe radiator' in the body of the message.
>>>
>>>
>>
>> NB:
>>
>> Have you read the reference manual ("doc/ref.html")?
>> Have you searched the mailing list archive
>> (www.open.com.au/archives/radiator)?
>> Have you had a quick look on Google (www.google.com)?
>> Have you included a copy of your configuration file (no secrets),
>> together with a trace 4 debug showing what is happening?
>>
>> -- 
>> Radiator: the most portable, flexible and configurable RADIUS server
>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>> -
>> Nets: internetwork inventory and management - graphical, extensible,
>> flexible with hardware, software, platform and database independence.
>> -
>> CATool: Private Certificate Authority for Unix and Unix-like systems.
>>
>> --
>> Archive at http://www.open.com.au/archives/radiator/
>> Announcements on radiator-announce at open.com.au
>> To unsubscribe, email 'majordomo at open.com.au' with
>> 'unsubscribe radiator' in the body of the message.
>>
>>
>
> NB:
>
> Have you read the reference manual ("doc/ref.html")?
> Have you searched the mailing list archive
> (www.open.com.au/archives/radiator)?
> Have you had a quick look on Google (www.google.com)?
> Have you included a copy of your configuration file (no secrets),
> together with a trace 4 debug showing what is happening?
>
> -- 
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
> -
> CATool: Private Certificate Authority for Unix and Unix-like systems.
>
>

NB:

Have you read the reference manual ("doc/ref.html")?
Have you searched the mailing list archive 
(www.open.com.au/archives/radiator)?
Have you had a quick look on Google (www.google.com)?
Have you included a copy of your configuration file (no secrets),
together with a trace 4 debug showing what is happening?

-- 
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows, MacOS X.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
-
CATool: Private Certificate Authority for Unix and Unix-like systems.

--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.


More information about the radiator mailing list