(RADIATOR) Assign Automatic IP

[Nuno Rodrigues]

Hello,

I need that the Radius Server (Radiator 3.8) assign an
IP address to the client that connects to one AP1100
(IOS 12.2).
Despite the Radius register that send the IP Address to
client, this don't accept the IP.

** Sending to 172.29.3.1 port 21672 ....
Code:       Access-Accept
Identifier: 242
Authentic: 
<181>&r<1>|<128><9><220><212><134>Y<241><235><146>_u
Attributes:
        User-Name = "test at test.pt"
        Framed-IP-Address = 172.28.1.220
        Framed-IP-Netmask = 255.255.0.0
        Tunnel-Type = 1:VLAN
        Tunnel-Medium-Type = 1:Ether_802
        Tunnel-Private-Group-ID = 1:100

The TCP/IP config of the client Wireless LAN tries to
obtain the IP in automatic mode.

Is a special configuration necessary on AP for that
Radius can assign the IP address for the client?

Thanks,
Nuno.

-------------------------------------------------
Email Enviado utilizando o serviço MegaMail

--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.