(RADIATOR) Can't Install Digest::MD5
MJ
php at cyberia.net.sa
Tue Jun 22 02:05:44 CDT 2004
Hi,
I want to assign IPs from the cfg/user file itself. I have gone through faqs
and manual, I am confused as there are multiple ways to do it. Would you
please give me some hints. I will work on oracle issue later on.
Thanks
----- Original Message -----
From: "Hugh Irvine" <hugh at open.com.au>
To: "MJ" <php at cyberia.net.sa>
Cc: <radiator at open.com.au>
Sent: Monday, June 21, 2004 7:45 AM
Subject: Re: (RADIATOR) Can't Install Digest::MD5
>
> Hello MJ -
>
> For point 1 how and where are you going to define the IP address pools?
> The usual way to indicate which IP address pool to use is by returning
> a Framed-Pool reply attribute according to which category a user
> belongs to.
>
> For point 2 you should use an AuthBy SQL clause instead of an AuthBy
> FILE clause which you would set up for Oracle.
>
> There is an example table creation script in "goodies/ansiCreate.sql"
> and an exampe configuration file in "goodies/sql.cfg" that you may find
> useful. There is also an FAQ item in "doc/faq.html".
>
> regards
>
> Hugh
>
>
> On 21 Jun 2004, at 00:12, MJ wrote:
>
> > Many thanks It work! Now I have two more things
> >
> > 1- We have two different categories of dsl users, "Home" and "Office"
> > both
> > are using similar realm. We want that each category of user should
> > get IP
> > from different network block reserved for this category means home
> > users
> > should get IP from "Home IP pool", and office users should get IP from
> > "Office IP pool", so that we can control bandwidth.
> >
> > 2- For testing purposes I am using flat file for authentication but for
> > production we need to connect radiator to Oracle database.
> >
> > Please help me in achieving these two tasks.
> >
> > MJ
> > ----- Original Message -----
> > From: "Hugh Irvine" <hugh at open.com.au>
> > To: "MJ" <php at cyberia.net.sa>
> > Cc: <radiator at open.com.au>
> > Sent: Friday, June 18, 2004 8:42 AM
> > Subject: Re: (RADIATOR) Can't Install Digest::MD5
> >
> >
> >>
> >> Hello MJ -
> >>
> >> You have a typo in the configuration file.
> >>
> >>
> >> <Handler Client-Indentifier=dialup>
> >>
> >> should be
> >>
> >> <Handler Client-Identifier=dialup>
> >>
> >>
> >> regards
> >>
> >> Hugh
> >>
> >>
> >> On 16 Jun 2004, at 23:27, MJ wrote:
> >>
> >>> Probably I sent wrong config file to you as I am using one very
> >>> similar to
> >>> your example. Sorry for that. I am sending you correct cfg file and
> >>> todays'
> >>> log file. please have a look.
> >>> Thanks for the marvelous support of Hugh Irvine and Stefan.
> >>> MJ
> >>> ----- Original Message -----
> >>> From: "Hugh Irvine" <hugh at open.com.au>
> >>> To: "MJ" <php at cyberia.net.sa>
> >>> Cc: <radiator at open.com.au>
> >>> Sent: Wednesday, June 16, 2004 2:54 PM
> >>> Subject: Re: (RADIATOR) Can't Install Digest::MD5
> >>>
> >>>
> >>>>
> >>>> Hello MJ -
> >>>>
> >>>> Your configuration file is incorrect. You cannot have AuthBy clauses
> >>>> inside Client clauses.
> >>>>
> >>>> It should look like this (as shown in my previous example).
> >>>>
> >>>> Foreground
> >>>> LogStdout
> >>>> LogDir .
> >>>> DbDir .
> >>>> # User a lower trace level in production systems:
> >>>> Trace 4
> >>>>
> >>>> # You will probably want to add other Clients to suit your site,
> >>>> # one for each NAS you want to work with
> >>>>
> >>>> <Client 212.119.67.21>
> >>>> Identifier Dialup
> >>>> Secret cisco
> >>>> DupInterval 0
> >>>> </Client>
> >>>>
> >>>> <Client 212.119.67.23>
> >>>> Identifier Roaming
> >>>> Secret cisco
> >>>> DupInterval 0
> >>>> </Client>
> >>>>
> >>>> <Handler Client-Identifier = Dialup>
> >>>> <AuthBy FILE>
> >>>> Filename ./dialup
> >>>> </AuthBy>
> >>>> </Handler>
> >>>>
> >>>> <Handler Client-Identifier = Roaming>
> >>>> <AuthBy FILE>
> >>>> Filename ./roaming
> >>>> </AuthBy>
> >>>> </Handler>
> >>>>
> >>>>
> >>>> regards
> >>>>
> >>>> Hugh
> >>>>
> >>>>
> >>>>
> >>>> On 15 Jun 2004, at 17:58, MJ wrote:
> >>>>
> >>>>> Thanks, both files are attached. Please ignore log events older
> >>>>> than
> >>>>> 15
> >>>>> June. you may find some successful attempts also as I told it works
> >>>>> fine
> >>>>> with first nas in cfg file, so I was testing with changing the
> >>>>> nases
> >>>>> order
> >>>>> in cfg file.
> >>>>>
> >>>>> MJ
> >>>>> ----- Original Message -----
> >>>>> From: "Hugh Irvine" <hugh at open.com.au>
> >>>>> To: "MJ" <php at cyberia.net.sa>
> >>>>> Cc: <radiator at open.com.au>
> >>>>> Sent: Tuesday, June 15, 2004 6:38 PM
> >>>>> Subject: Re: (RADIATOR) Can't Install Digest::MD5
> >>>>>
> >>>>>
> >>>>>
> >>>>> Hello MJ -
> >>>>>
> >>>>> Please send me a copy of the configuration file that you are using
> >>>>> together with a trace 4 debug from that instance of Radiator
> >>>>> showing
> >>>>> exactly what is happening.
> >>>>>
> >>>>> In what you show below, Radiator is telling you that it can't find
> >>>>> a
> >>>>> Handler to process this radius request. I am guessing this is
> >>>>> because
> >>>>> your Client definitions are not correct, but without seeing your
> >>>>> configuration file it is impossible to tell.
> >>>>>
> >>>>> regards
> >>>>>
> >>>>> Hugh
> >>>>>
> >>>>>
> >>>>> On 15 Jun 2004, at 16:44, MJ wrote:
> >>>>>
> >>>>>> Hi,
> >>>>>> I created new cfg file exactly same as per your example but I am
> >>>>>> getting following error, while I am connecting from second NAS
> >>>>>> (which
> >>>>>> appear 2nd in cfg file). It works fine if I connect from first NAS
> >>>>>> (which appears), I tried to change order of NASes in the cfg file,
> >>>>>> it
> >>>>>> always works fine with first client set. Any idea?
> >>>>>> MJ
> >>>>>> *** Received from 212.119.67.23 port 1645 ....
> >>>>>> Code: Access-Request
> >>>>>> Identifier: 77
> >>>>>> Authentic:
> >>>>>> <225>p<227>[c<138><130>s<131><190><250><227><171><156>D<242>
> >>>>>> Attributes:
> >>>>>> Framed-Protocol = PPP
> >>>>>> User-Name = "roaming"
> >>>>>> User-Password =
> >>>>>> "f<25><160><231><211>u<18><176>D<165><158>6<0>!I<166>"
> >>>>>> NAS-Port-Type = Virtual
> >>>>>> NAS-Port = 80
> >>>>>> Calling-Station-Id = "14647114"
> >>>>>> Called-Station-Id = "3010"
> >>>>>> Service-Type = Framed-User
> >>>>>> NAS-IP-Address = 212.119.67.23
> >>>>>>
> >>>>>> Tue Jun 15 16:49:37 2004: WARNING: Could not find a handler for
> >>>>>> roaming: request is ignored
> >>>>>> ----- Original Message -----
> >>>>>> From: "Hugh Irvine" <hugh at open.com.au>
> >>>>>> To: "MJ" <php at cyberia.net.sa>
> >>>>>> Cc: <radiator at open.com.au>; <elias at tmnet.com.my>; "Stefan
> >>>>>> Riegelnik"
> >>>>>> <sriegelnik at netway.at>
> >>>>>> Sent: Monday, June 14, 2004 6:17 PM
> >>>>>> Subject: Re: (RADIATOR) Can't Install Digest::MD5
> >>>>>>
> >>>>>>
> >>>>>
> >>>>> NB: have you included a copy of your configuration file (no
> >>>>> secrets),
> >>>>> together with a trace 4 debug showing what is happening?
> >>>>>
> >>>>> --
> >>>>> Radiator: the most portable, flexible and configurable RADIUS
> >>>>> server
> >>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> >>>>> -
> >>>>> Nets: internetwork inventory and management - graphical,
> >>>>> extensible,
> >>>>> flexible with hardware, software, platform and database
> >>>>> independence.
> >>>>> -
> >>>>> CATool: Private Certificate Authority for Unix and Unix-like
> >>>>> systems.
> >>>>>
> >>>>>
> >>>>>
> >>>>> NB: have you included a copy of your configuration file (no
> >>>>> secrets),
> >>>>> together with a trace 4 debug showing what is happening?
> >>>>>
> >>>>> --
> >>>>> Radiator: the most portable, flexible and configurable RADIUS
> >>>>> server
> >>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> >>>>> -
> >>>>> Nets: internetwork inventory and management - graphical,
> >>>>> extensible,
> >>>>> flexible with hardware, software, platform and database
> >>>>> independence.
> >>>>> -
> >>>>> CATool: Private Certificate Authority for Unix and Unix-like
> >>>>> systems.
> >>>>>
> >>>>> <logfile.log><simple1.cfg>
> >>>>
> >>>> NB: have you included a copy of your configuration file (no
> >>>> secrets),
> >>>> together with a trace 4 debug showing what is happening?
> >>>>
> >>>> --
> >>>> Radiator: the most portable, flexible and configurable RADIUS server
> >>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> >>>> -
> >>>> Nets: internetwork inventory and management - graphical, extensible,
> >>>> flexible with hardware, software, platform and database
> >>>> independence.
> >>>> -
> >>>> CATool: Private Certificate Authority for Unix and Unix-like
> >>>> systems.
> >>>>
> >>>>
> >>> <logfile><simple1.cfg>
> >>
> >> NB: have you included a copy of your configuration file (no secrets),
> >> together with a trace 4 debug showing what is happening?
> >>
> >> --
> >> Radiator: the most portable, flexible and configurable RADIUS server
> >> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> >> -
> >> Nets: internetwork inventory and management - graphical, extensible,
> >> flexible with hardware, software, platform and database independence.
> >> -
> >> CATool: Private Certificate Authority for Unix and Unix-like systems.
> >>
> >> --
> >> Archive at http://www.open.com.au/archives/radiator/
> >> Announcements on radiator-announce at open.com.au
> >> To unsubscribe, email 'majordomo at open.com.au' with
> >> 'unsubscribe radiator' in the body of the message.
> >>
> >
> >
>
> NB: have you included a copy of your configuration file (no secrets),
> together with a trace 4 debug showing what is happening?
>
> --
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
> -
> CATool: Private Certificate Authority for Unix and Unix-like systems.
>
> --
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
>
--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list