(RADIATOR) multiple <Log FILE>
Lengacher Stefan
Stefan.Lengacher at weroam.com
Mon Jun 21 06:53:09 CDT 2004
Bret, Hugh
Thanks for the bogus-hint. It now works well (of course it would be
better to have a globally part to define different <Log FILE> Handlers).
The global Log file logs everything and the others only the appropriate
one.
But this now leads me to the _trace_ Problem. I would like to have in
this example:
- 1 global log file (logfile_proxy_auth) where we log at trace level 2
or 3
- 1 log file for each defined realm (wetest.ch and lemy.ch) where we
would like to be
able to log at level 4 if necessary.
I've setted everything to trace 4 but this appears only to be valid for
the global log file. In the others i have alway logs at level 2 or 3. Is
this normal behaviour? I read in the documentation that logging at trace
level 4 in a <Log FILE> clause is only possible when globally trace is
set to 4. But this doesn't work in my example, since i've set every
trace to 4. So this should work in this example.
But when we go productive, i don't want a trace 4 globally! I just want
a trace 4 on a specific realm if there are any problems. Isn't that the
normal way of logging?
Do you have any work around for me?
Regards,
-Stefan
Example configuration:
########################################################
LogDir /var/log/radius
LogFile %L/logfile_proxy_auth
Trace 4
<Realm foo>
<Log FILE>
Identifier lemylogger
Filename %L/lemy_logfile_proxy_auth
Trace 4
</Log>
<Log FILE>
Identifier wetestlogger
Filename %L/wetest_logfile_proxy_auth
Trace 4
</Log>
</Realm>
<Realm lemy.ch>
<AuthBy RADIUS>
Host <snipped>
Secret <snipped>
AuthPort <snipped>
AcctPort <snipped>
</AuthBy>
Log lemylogger
</Realm>
<Realm wetest.ch>
<AuthBy RADIUS>
Host <snipped>
Secret <snipped>
AuthPort <snipped>
AcctPort <snipped>
</AuthBy>
Log wetestlogger
</Realm>
########################################################
-----Original Message-----
From: Bret Jordan [mailto:bret.jordan at utah.edu]
Sent: Freitag, 18. Juni 2004 23:18
To: Hugh Irvine
Cc: Lengacher Stefan; radiator at open.com.au
Subject: Re: (RADIATOR) multiple <Log FILE>
You have to make a bogus realm/handler and put all your <Log FILE> stuff
in it, not globally then it will work. Let me know if you have
questions on what it should look like.. Then you can do exactly what
you want. I have made a feature request to get a global logging section
that will allow you to define multiple Log handlers., btw.
Bret
Hugh Irvine wrote:
>
> Hello Stefan -
>
> What you have discovered is correct - the logging is done for the
> server as a whole and if you have defined multiple Log FILE's you will
> get multiple copies of the same logging information.
>
> regards
>
> Hugh
>
>
> On 18 Jun 2004, at 20:09, Lengacher Stefan wrote:
>
>> Hello
>>
>> I'm an absolute newbie on Radiator. I just began working at weroam in
>> switzerland a couple of weeks ago and am already playing around with
>> your really good looking tool. Therefore i apologize if i ask stupid
>> questions ;-)
>>
>> Here we go:
>>
>> What we're exactly trying to do:
>> We want different Logfiles for different Realms.
>>
>> What i've found out:
>> We can use <Log FILE> for this.
>>
>> The Problem i reflect now is:
>> I've defined two <Log FILE> parts with different Identifiers and a
>> LogFile for logging everything and logging the realms that do not
>> define a Log param. In the Realm parts, i then set Log to the
>> according one. Unfortunately it does not Log correctly.
>>
>> The config: ##################################################
>> LogDir /var/log/radius
>> DbDir /etc/raddb
>> LogFile %L/logfile_proxy_auth
>>
>> Trace 4
>>
>> <Log FILE>
>> Identifier lemylogger
>> Filename %L/lemy_logfile_proxy_auth
>> Trace 4
>> </Log>
>>
>> <Log FILE>
>> Identifier wetestlogger
>> Filename %L/wetest_logfile_proxy_auth
>> Trace 4
>> </Log>
>>
>> <Realm lemy.ch>
>> <AuthBy RADIUS>
>> Host <snipped out>
>> Secret <snipped out>
>> AuthPort <snipped out>
>> AcctPort <snipped out>
>> </AuthBy>
>> Log lemylogger
>> </Realm>
>>
>> <Realm wetest.ch>
>> <AuthBy RADIUS>
>> Host <snipped out>
>> Secret <snipped out>
>> AuthPort <snipped out>
>> AcctPort <snipped out>
>> </AuthBy>
>> Log wetestlogger
>> </Realm> #####################################################
>>
>> When i now do a radpwtst once with realm wetest.ch and once with real
>> lemy.ch then in both cases i see the log-trace in logfile_proxy_auth
>> and lemy_logfile_proxy_auth. But nothing in wetest_logfile_proxy_auth
>>
>> Is that because i defined both <Log FILE> globally and they get
>> therefore overwritten? This would be a bit exhausting when i have to
>> define each <Log FILE> inside every Realm definition.
>> Are there any other possiblities to do this (even easyier)?
>>
>>
>> Regards,
>>
>> Stefan Lengacher
>> Project & Testing Manager
>>
>> ____________________________________________
>> WeRoam(r)
>>
>> TOGEWAnet AG / P.O. Box / Nussbaumstrasse 25
>> CH-3000 Bern 22 / Switzerland
>> tel. +41 31 341 10 20
>> direct: +41 31 341 1126
>> fax: +41 31 341 10 21
>> mobile: +41 79 483 8422
>> Stefan.Lengacher at weroam.com
>> www.weroam.com
>> ____________________________________________
>> This email may contain confidential and/or privileged information
>> which should not be used, copied or disclosed without permission. If
>> you are not an intended recipient, please contact the sender
>> immediately.
>>
>> --
>> Archive at http://www.open.com.au/archives/radiator/
>> Announcements on radiator-announce at open.com.au
>> To unsubscribe, email 'majordomo at open.com.au' with
>> 'unsubscribe radiator' in the body of the message.
>>
>>
>
> NB: have you included a copy of your configuration file (no secrets),
> together with a trace 4 debug showing what is happening?
>
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bret Jordan Dean's Office
Director of Networking College of Engineering
801.585.3765 University of Utah
jordan at coe.utah.edu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list