(RADIATOR) Cisco 1200 and 802.1x problem

David Rhodes drhodes at deakin.edu.au
Sat Jan 3 22:58:34 CST 2004


Hi,

I am trying to setup Radiator for our wireless Cisco 1200's using PEAP and mschapv2. (XP implementation).  I have the following problem which seems to be in the 802.1x phase:

1. If I set the mschapv2 setting on the client to use the logged in username and password it will fail with the debugs below.

2. Disabling this option brings up the Username and Password (and domain) dialog box on log in, but the wireless connection is marked 'unsuccessful' before the details can be entered and the authentication is unsucessful. It also seems to bipass the Radius server, with no debugging output.

I have disabled server certificate verification on the client to remove this as a problem. I have also not enabled WEP on the AP.

I am assuming the Radius config is correct, as it seems to colerate with that of other configs posted to the list. I will be checking the access point config with the TAC (unless some-one on the list can confirm it is correct), but any other hints would be much valued.

OS is XP SP1 (no cisco client).
Client card is a Cisco 340 pccard

Radiator config:
================
# $Id: eap_peap.cfg,v 1.6 2003/09/16 01:33:42 mikem Exp $
AuthPort 1645
AcctPort 1646
BindAddress 192.168.100.XX,192.168.100.XX,127.0.0.1

Foreground
LogStdout
LogDir          .
DbDir           .
Trace           4

<Client DEFAULT>
        Secret  XXXX_DELETED
        DupInterval 0
</Client>

<Handler TunnelledByPEAP=1>
        <AuthBy FILE>
                Filename %D/users
                EAPType PEAP,MSCHAP-V2
        </AuthBy>
</Handler>

<Handler>
        <AuthBy FILE>
                Filename %D/users

                EAPType PEAP
                EAPTLS_CAFile %D/certificates/demoCA/cacert.pem
                EAPTLS_CertificateFile %D/certificates/cert-srv.pem
                EAPTLS_CertificateType PEM
                EAPTLS_PrivateKeyFile %D/certificates/cert-srv.pem
                EAPTLS_PrivateKeyPassword whatever
                EAPTLS_MaxFragmentSize 1000
                AutoMPPEKeys
                SSLeayTrace 4
        </AuthBy>
</Handler>



Radiator debug:
===============
radiusd -config_file /etc/radius.cfg
Sun Jan  4 11:23:49 2004: DEBUG: Reading users file ./users
Sun Jan  4 11:23:49 2004: DEBUG: Reading users file ./users
Sun Jan  4 11:23:50 2004: DEBUG: Finished reading configuration file '/etc/radiu
s.cfg'
Sun Jan  4 11:23:50 2004: DEBUG: Reading dictionary file './dictionary'
Sun Jan  4 11:23:52 2004: DEBUG: Creating authentication port 192.168.100.1:1645
Sun Jan  4 11:23:52 2004: DEBUG: Creating accounting port 192.168.100.1:1646
Sun Jan  4 11:23:52 2004: DEBUG: Creating authentication port 192.168.100.55:164
5
Sun Jan  4 11:23:52 2004: DEBUG: Creating accounting port 192.168.100.55:1646
Sun Jan  4 11:23:52 2004: DEBUG: Creating authentication port 127.0.0.1:1645
Sun Jan  4 11:23:52 2004: DEBUG: Creating accounting port 127.0.0.1:1646
Sun Jan  4 11:23:53 2004: NOTICE: Server started: Radiator 3.8 on pup.engicom.co
m.au
Sun Jan  4 11:24:17 2004: DEBUG: Packet dump:
*** Received from 192.168.100.150 port 21645 ....
Code:       Access-Request
Identifier: 102
Authentic:  <31><9><163>n2<161><157><188>AL:t}CR9
Attributes:
	User-Name = "AD\drhodes"
	Framed-MTU = 1400
	Called-Station-Id = "000d.ed2e.ca06"
	Calling-Station-Id = "0040.9636.0c8e"
	Message-Authenticator = <245>p.0<<193>6Mo<209>:<189><188><245>QR
	EAP-Message = <2><2><0><15><1>AD\drhodes
	NAS-Port-Type = Wireless-IEEE-802-11
	NAS-Port = 383
	Service-Type = Framed-User
	NAS-IP-Address = 192.168.100.150
	NAS-Identifier = "ap"

Sun Jan  4 11:24:17 2004: DEBUG: Handling request with Handler ''
Sun Jan  4 11:24:17 2004: DEBUG:  Deleting session for AD\drhodes, 192.168.100.1
50, 383
Sun Jan  4 11:24:17 2004: DEBUG: Handling with Radius::AuthFILE: 
Sun Jan  4 11:24:17 2004: DEBUG: Handling with EAP: code 2, 2, 15
Sun Jan  4 11:24:17 2004: DEBUG: Response type 1
Sun Jan  4 11:24:18 2004: DEBUG: EAP result: 3, EAP PEAP Challenge
Sun Jan  4 11:24:18 2004: DEBUG: Access challenged for AD\drhodes: EAP PEAP Chal
lenge
Sun Jan  4 11:24:18 2004: DEBUG: Packet dump:
*** Sending to 192.168.100.150 port 21645 ....
Code:       Access-Challenge
Identifier: 102
Authentic:  <31><9><163>n2<161><157><188>AL:t}CR9
Attributes:
	EAP-Message = <1><3><0><6><25>!
	Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Sun Jan  4 11:24:18 2004: DEBUG: Packet dump:
*** Received from 192.168.100.150 port 21645 ....
Code:       Access-Request
Identifier: 103
Authentic:  p<217>f<139><240><228><22><138><227><164><141><203><193><214><235>U
Attributes:
	User-Name = "AD\drhodes"
	Framed-MTU = 1400
	Called-Station-Id = "000d.ed2e.ca06"
	Calling-Station-Id = "0040.9636.0c8e"
	Message-Authenticator = <151>$,$<5><164><186><210><143><235><25>6o<183>q
D
	EAP-Message = <2><3><0>P<25><128><0><0><0>F<22><3><1><0>A<1><0><0>=<3><1
>?<247><149><202><205><165><147><145><229>J<249><138>Xq<127><242><239><247>x<139
><203><153><140>*<253><196>_<23><187><240>RZ<0><0><22><0><4><0><5><0><10><0><9><
0>d<0>b<0><3><0><6><0><19><0><18><0>c<1><0>
	NAS-Port-Type = Wireless-IEEE-802-11
	NAS-Port = 383
	Service-Type = Framed-User
	NAS-IP-Address = 192.168.100.150
	NAS-Identifier = "ap"

Sun Jan  4 11:24:18 2004: DEBUG: Handling request with Handler ''
Sun Jan  4 11:24:18 2004: DEBUG:  Deleting session for AD\drhodes, 192.168.100.1
50, 383
Sun Jan  4 11:24:18 2004: DEBUG: Handling with Radius::AuthFILE: 
Sun Jan  4 11:24:18 2004: DEBUG: Handling with EAP: code 2, 3, 80
Sun Jan  4 11:24:18 2004: DEBUG: Response type 25
Sun Jan  4 11:24:18 2004: DEBUG: EAP TLS SSL_accept result: -1, 2, 8576
Sun Jan  4 11:24:18 2004: DEBUG: EAP result: 3, EAP PEAP Challenge
Sun Jan  4 11:24:18 2004: DEBUG: Access challenged for AD\drhodes: EAP PEAP Chal
lenge
Sun Jan  4 11:24:18 2004: DEBUG: Packet dump:
*** Sending to 192.168.100.150 port 21645 ....
Code:       Access-Challenge
Identifier: 103
Authentic:  p<217>f<139><240><228><22><138><227><164><141><203><193><214><235>U
Attributes:
	EAP-Message = <1><4><3><242><25><192><0><0><8>P<22><3><1><0>J<2><0><0>F<
3><1>?<247><177><146><255>+<227>4<200><146><130>q<196><0><144><6><206><181>k#<7>
<163><186><129> <216><245><26><203><228><4><236> <216><127><244><172><180>4<185>
<247><24><186>k<23>L<254><185><156><176>|<136><6><151><152><29>,<186><31>/<144><
205>J<195><171><0><4><0><22><3><1><7><27><11><0><7><23><0><7><20><0><2><209>0<13
0><2><205>0<130><2>6<160><3><2><1><2><2><1><2>0<13><6><9>*<134>H<134><247><13><1
><1><4><5><0>0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><1
9><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19>
<21>OSC Demo Certificates1!0<31><6><3>U<4><11><19><24>Test Certificate Sec
	EAP-Message = tion1/0-<6><3>U<4><3><19>&OSC Test CA (do not use in produ
ction)1 0<30><6><9>*<134>H<134><247><13><1><9><1><22><17>mikem at open.com.au0<30><
23><13>030227061500Z<23><13>040227061500Z0u1<11>0<9><6><3>U<4><6><19><2>AU1<17>0
<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<24>0<22
><6><3>U<4><10><19><15>My Test Company1%0#<6><3>U<4><3><19><28>test.server.some.
company.com0<129><159>0<13><6><9>*<134>H<134><247><13><1><1>
	EAP-Message = <1><5><0><3><129><141><0>0<129><137><2><129><129><0><196><
186>)<217><245><205><159>@<144><133><177><255>0<165><3><215>cGR<136><231><253>9<
193><13><255>m@<220>y^<160><244><236>Sa'<198>^<231><158>4<156>"<242>IS<151><30><
211>$<142><196>!}R<146><166><129>yh<17><162><207><196><0><171>5s<187><229><139>2
<250><146><1><187><207><226><203>5<251><178><1><212><178><141><219>O<253><134><2
13>N|<172>:J<23><173><161><191><141><25>&<198>Fi<17><181><137>Fy<0><177><210><21
5><186>x<141><197><212>s<145><235>\<164><8>!<2><3><1><0><1><163><23>0<21>0<19><6
><3>U<29>%<4><12>0<10><6><8>+<6><1><5><5><7><3><1>0<13><6><9>*<134>H<134><247><1
3><1><1><4><5><0><3><129><129><0><20>m<159><141><185><184><252><248><201>FM<195>
PB(^<127>3<24><136><172><19><211><137><132>EF<170>9<236>^<187><146><253><171><20
0><183><230><148><142><21>_<9>^<227><10>3<162><186><214><206><197>Tq<219><4>r<23
9>?<1><16><203>
	EAP-Message = T<0><161>wm<173>S<4><0>)<141><209><<197>tT<228><150>P<156>
<22>^zes^<202>u<161><176>F3=<4><200><229><154>q<146><194>cy<23>z*o><219><28><206
>t<196><188><3><195>.%<19>mD<242><149><237>O<138><193><0><4>=0<130><4>90<130><3>
<162><160><3><2><1><2><2><1><0>0<13><6><9>*<134>H<134><247><13><1><1><4><5><0>0<
129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<
18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC Demo Ce
rtificates1!0<31><6><3>U<4><11><19><24>Test Certificate Section1/0-<6><3>U<4><3>
<19>&OSC Test CA (do no
	Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Sun Jan  4 11:24:18 2004: DEBUG: Packet dump:
*** Received from 192.168.100.150 port 21645 ....
Code:       Access-Request
Identifier: 104
Authentic:  <132><173>t<213>8<222><179><171>A<139><250><150><218><221><176>z
Attributes:
	User-Name = "AD\drhodes"
	Framed-MTU = 1400
	Called-Station-Id = "000d.ed2e.ca06"
	Calling-Station-Id = "0040.9636.0c8e"
	Message-Authenticator = t<137><185><154><191><155><20>O<135><213><216><2
05>/<208><7>0
	EAP-Message = <2><4><0><6><25><0>
	NAS-Port-Type = Wireless-IEEE-802-11
	NAS-Port = 383
	Service-Type = Framed-User
	NAS-IP-Address = 192.168.100.150
	NAS-Identifier = "ap"

Sun Jan  4 11:24:18 2004: DEBUG: Handling request with Handler ''
Sun Jan  4 11:24:18 2004: DEBUG:  Deleting session for AD\drhodes, 192.168.100.1
50, 383
Sun Jan  4 11:24:18 2004: DEBUG: Handling with Radius::AuthFILE: 
Sun Jan  4 11:24:18 2004: DEBUG: Handling with EAP: code 2, 4, 6
Sun Jan  4 11:24:18 2004: DEBUG: Response type 25
Sun Jan  4 11:24:18 2004: DEBUG: EAP result: 3, EAP PEAP Challenge
Sun Jan  4 11:24:18 2004: DEBUG: Access challenged for AD\drhodes: EAP PEAP Chal
lenge
Sun Jan  4 11:24:18 2004: DEBUG: Packet dump:
*** Sending to 192.168.100.150 port 21645 ....
Code:       Access-Challenge
Identifier: 104
Authentic:  <132><173>t<213>8<222><179><171>A<139><250><150><218><221><176>z
Attributes:
	EAP-Message = <1><5><3><238><25>@t use in production)1 0<30><6><9>*<134>
H<134><247><13><1><9><1><22><17>mikem at open.com.au0<30><23><13>030227061411Z<23><
13>050226061411Z0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8
><19><8>Victoria1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><
19><21>OSC Demo Certificates1!0<31><6><3>U<4><11><19><24>Test Certificate Sectio
n1/0-<6><3>U<4><3><19>&OSC Test CA (do not use in p
	EAP-Message = roduction)1 0<30><6><9>*<134>H<134><247><13><1><9><1><22><
17>mikem at open.com.au0<129><159>0<13><6><9>*<134>H<134><247><13><1><1><1><5><0><3
><129><141><0>0<129><137><2><129><129><0><193>@h<28><185>'<7><254><247>{9<233><2
45>3S<209>=<173>>c<144>Z<239>?b<150><224><171><219><170><170>i<226><251><234>\Jw
i<210><141><249><141><148><224>|<188>V<24><209><8><223>f?<149><172><6><226><18><
232>1<249><227>$<176>G<164>'Y<193><160>$n<160>e<153>V<166>x<2><162><<244><4><225
>T>n<18><<204><210><135><162>T<16><221><6>Pn<9>7<141><197><160><197><245><155>6<
3><172><154>p<230><210>Z<159><149><192>C<255><154><220><149><3>*<156>q<2><3><1><
0><1><163><130><1>+0<130><1>'0<29><6><3>U<29><14><4><22><4><20><180><27><24>R'<2
7><169>)<152><148>o<139>c<198><6>9\<249>s<196>0<129><247><6><3>U<29>#
	EAP-Message = <4><129><239>0<129><236><128><20><180><27><24>R'<27><169>)
<152><148>o<139>c<198><6>9\<249>s<196><161><129><208><164><129><205>0<129><202>1
<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victoria1<18>0<16><6
><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC Demo Certificates
1!0<31><6><3>U<4><11><19><24>Test Certificate Section1/0-<6><3>U<4><3><19>&OSC T
est CA (do not use in production)1 0<30><6><9>*<134>H<134><247><13><1><9><1><22>
<17>mikem at open.com.au<130><1><0>0<12><6><3>U<29><19><4><5>0<3>
	EAP-Message = <1><1><255>0<13><6><9>*<134>H<134><247><13><1><1><4><5><0>
<3><129><129><0>A<130>4<253><23>-<13><9><9><222>3<19><171>aj<23><187><195>gs<145
><194>w<164>1m#<242>t<233><144><146>&g<162><190><234><145>H<159><10>^6IQ<223><21
9><193>@><204>b<245><12><6><133><147><132><192>fU<165><197><180>k<136>:<8><198><
152><165>*%<221><237><188><23><251><255><172>'n<142>H<25>q<173>t<215><212><221><
239><20>FZyd<205><240>Wbd<143><139>q]h<236><127><16><143>tA<163>4I<236><230><147
><218>><175>B^<130><0>*9<22><3><1><0><220><13><0><0><212><2><1><2><0><207><0><20
5>0<129><202>1<11>0<9><6><3>U<4><6><19><2>AU1<17>0<15><6><3>U<4><8><19><8>Victor
ia1<18>0<16><6><3>U<4><7><19><9>Melbourne1<30>0<28><6><3>U<4><10><19><21>OSC Dem
o Certif
	Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>

Sun Jan  4 11:24:19 2004: DEBUG: Packet dump:
*** Received from 192.168.100.150 port 21645 ....
Code:       Access-Request
Identifier: 105
Authentic:  <139><189>OFpZZ&|<224>u<163>e<23><207>0
Attributes:
	User-Name = "AD\drhodes"
	Framed-MTU = 1400
	Called-Station-Id = "000d.ed2e.ca06"
	Calling-Station-Id = "0040.9636.0c8e"
	Message-Authenticator = Q<158>m<247>@<142>@<138><216><226>1L~.<11><209>
	EAP-Message = <2><5><0><6><25><0>
	NAS-Port-Type = Wireless-IEEE-802-11
	NAS-Port = 383
	Service-Type = Framed-User
	NAS-IP-Address = 192.168.100.150
	NAS-Identifier = "ap"

Sun Jan  4 11:24:19 2004: DEBUG: Handling request with Handler ''
Sun Jan  4 11:24:19 2004: DEBUG:  Deleting session for AD\drhodes, 192.168.100.1
50, 383
Sun Jan  4 11:24:19 2004: DEBUG: Handling with Radius::AuthFILE: 
Sun Jan  4 11:24:19 2004: DEBUG: Handling with EAP: code 2, 5, 6
Sun Jan  4 11:24:19 2004: DEBUG: Response type 25
Sun Jan  4 11:24:19 2004: DEBUG: EAP result: 3, EAP PEAP Challenge
Sun Jan  4 11:24:19 2004: DEBUG: Access challenged for AD\drhodes: EAP PEAP Chal
lenge
Sun Jan  4 11:24:19 2004: DEBUG: Packet dump:
*** Sending to 192.168.100.150 port 21645 ....
Code:       Access-Challenge
Identifier: 105
Authentic:  <139><189>OFpZZ&|<224>u<163>e<23><207>0
Attributes:
	EAP-Message = <1><6><0><134><25><0>icates1!0<31><6><3>U<4><11><19><24>Te
st Certificate Section1/0-<6><3>U<4><3><19>&OSC Test CA (do not use in productio
n)1 0<30><6><9>*<134>H<134><247><13><1><9><1><22><17>mikem at open.com.au<14><0><0>
<0>
	Message-Authenticator = <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>




1200 series config:
===================

ap#show running-config
Building configuration...

Current configuration : 2598 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$gdtO$m5O3HjtpPuGmOT4TFZ0x0.
!
username XXXX_DELETED password 7 XXXX_DELETED
ip subnet-zero
!
aaa new-model
!
!
aaa group server radius rad_eap
 server 192.168.100.XX auth-port 1645 acct-port 1646
 deadtime 0
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
!
aaa group server tacacs+ tac_admin
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 ssid frogjump
    authentication open eap eap_methods
    authentication network-eap eap_methods
    guest-mode
 !
 speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
 rts threshold 2312
 station-role root
 dot1x reauth-period 50
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 shutdown
 !
 ssid tsunami
    authentication open
    guest-mode
 !
 speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
 rts threshold 2312
 station-role root
 dot1x reauth-period 50
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface FastEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address 192.168.100.XX 255.255.255.0
 no ip route-cache
!
ip default-gateway 192.168.100.55
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
/ivory/1100
ip radius source-interface BVI1
radius-server host 192.168.100.XX auth-port 1645 acct-port 1646 key 7 XXXX_DELETED
radius-server host 192.168.100.XX auth-port 1645 acct-port 1646 key 7 XXXX_DELETED
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
bridge 1 route ip
!
!
line con 0
line vty 5 15
!
end


Debug:
======

*Mar  1 04:28:57.102: dot11_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,EAP_START) for 0040.9636.0c8e
*Mar  1 04:28:57.102: dot11_dot1x_send_id_req_to_client: sending identity request for 0040.9636.0c8e
*Mar  1 04:28:57.111: dot11_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:57.111: dot11_dot1x_send_response_to_server: Sending client 0040.9636.0c8e data to server
*Mar  1 04:28:58.699: dot11_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:58.699: dot11_dot1x_send_response_to_client: Forwarding server message to client 0040.9636.0c8e
*Mar  1 04:28:58.705: dot11_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:58.706: dot11_dot1x_send_response_to_server: Sending client 0040.9636.0c8e data to server
*Mar  1 04:28:58.925: dot11_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:58.925: dot11_dot1x_send_response_to_client: Forwarding server message to client 0040.9636.0c8e
*Mar  1 04:28:58.929: dot11_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:58.930: dot11_dot1x_send_response_to_server: Sending client 0040.9636.0c8e data to server
*Mar  1 04:28:59.117: dot11_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:59.117: dot11_dot1x_send_response_to_client: Forwarding server message to client 0040.9636.0c8e
*Mar  1 04:28:59.121: dot11_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:59.121: dot11_dot1x_send_response_to_server: Sending client 0040.9636.0c8e data to server
*Mar  1 04:28:59.663: dot11_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_REPLY) for 0040.9636.0c8e
*Mar  1 04:28:59.663: dot11_dot1x_send_response_to_client: Forwarding server message to client 0040.9636.0c8e
*Mar  1 04:29:25.725: %DOT11-4-MAXRETRIES: Packet to client 0040.9636.0c8e reached max retries, removing the client




Regards

David Rhodes

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.


More information about the radiator mailing list