Fwd: (RADIATOR) Help with configure radius.cfg with eap and ldap

[tudalat at shaw.ca]

> Hello Andy,
>
Hi Mike:

>
> On Thu, 22 Jan 2004 09:03 am, tudalat at shaw.ca wrote:
> > ----- Original Message -----
> > From: Mike McCauley <mikem at open.com.au>
> > Date: Tuesday, January 20, 2004 2:50 pm
> > Subject: Re: Fwd: (RADIATOR) Help with configure radius.cfg with eap and
> > ldap
> >
> > > Hello Andy,
> >
> > Hi Mike:
> > > I think the problem is that you do not have PasswordAttr defined
> > > in your
> > > config file for AuthBy LDAP2. You should have seen an error
> > > message about that when it starts up? Its not required with
> >
> > There was no error when ServerChecksPassword is not used. I tried
> > "PasswordAttr    userPassword" and I got "There was no password attribute
> > found" PasswordAttr (alone) and EncryptedPasswordAttr, however, work
> > successfully with LDAP but MD5-Challenge still fails. Just wonder if it's
> > because of our
> > peculiar way of implementing ldap.  I am not allowed to retrieve
> > the UserPassword, I can only use it to do a LDAP bind.
>
> I think that will be the problem. In order for Radiator to support
> MD5-Challenge, it needs to be able to get the plaintext password from the
> LDAP server in the LDAP attribute named by PasswordAttr.

We are using one way linux-crypt to store the passwords so the plaintext
option is not possible. Can you recommend any other EAP that will work
in my case.

Thank a bunch
>
> Cheers.

Andy Dalat
tudata at shaw.ca
-------------- next part --------------
An embedded message was scrubbed...
From: Tu Nguyen <nguyen at ucalgary.ca>
Subject: Re: Fwd: (RADIATOR) Help with configure radius.cfg with eap and ldap
Date: Wed, 04 Feb 2004 11:14:43 -0700 (MST)
Size: 9398
URL: <http://www.open.com.au/pipermail/radiator/attachments/20040204/d531b7b1/attachment.mht>