(RADIATOR) Negative bytes_out number on adsl users!!

[Nikos Aslanakis]

Hello all,
 
We're trying to setup a billing system with radiator interim updates for our
adsl users. We're getting negative values for bytes_out witch translated
into wrong values. This affects our billling system as you may imagine. 
Is there any workaround for this ?

Thanks a lot for your support,



Here is an example accounting record:


###############################################
CISCO ROUTER (show accounting command - IOS ver 12.2-17 3660 router)

Active Accounted actions on Interface Virtual-Access3, User XXX at xxx Priv 1
 Task ID 8949, Network Accounting record, 14:11:17 Elapsed
 task_id=8949 start_time=1064437345 timezone=GMT service=ppp
ip-addresses=195.66.100.9 source-ip=195.66.100.10 tunnel-type=2
tunnel-id=spark-the-dsl gw-name=standard tunnel-connection-id=9863899
protocol=ip addr=195.66.98.140 pre-session-time=1674397 pre-bytes-in=104
pre-bytes-out=35 pre-paks-in=4 pre-paks-out=3 bytes_in=333783
bytes_out=-637369443 paks_in=10155 paks_out=6244 elapsed_time=48771
###############################################
RADIATOR LOGFILE  (debug 4)


Attributes:
        NAS-IP-Address = 195.66.100.148
        NAS-Port = 3
        Cisco-NAS-Port = "Virtual-Access3"
        NAS-Port-Type = ISDN
        User-Name = XXX at xxx
        Acct-Status-Type = Alive
        Acct-Authentic = RADIUS
        Service-Type = Framed-User
        Acct-Session-Id = "0C0022F5"
        Framed-Protocol = PPP
        Tunnel-Server-Endpoint = 195.66.100.9
        Tunnel-Client-Endpoint = 195.66.100.10
        Tunnel-Type = 0:L2TP
        Tunnel-Client-Auth-ID = spark-the-dsl
        Tunnel-Server-Auth-ID = standard
        Tunnel-ID = 9863899
        Framed-IP-Address = 195.66.98.140
        Acct-Input-Octets = 333783
        Acct-Output-Octets = 3657597853
        Acct-Input-Packets = 10155
        Acct-Output-Packets = 6244
        Acct-Session-Time = 48771
        cisco-avpair = "tunnel-id=spark-the-dsl"
        cisco-avpair = "gw-name=standard"
        cisco-avpair = "pre-session-time=1674397"
        cisco-avpair = "pre-bytes-in=104"
        cisco-avpair = "pre-bytes-out=35"
        cisco-avpair = "pre-paks-in=4"
        cisco-avpair = "pre-paks-out=3"
        Acct-Delay-Time = 0

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.