(RADIATOR) AddToReply

[Andrea Brancatelli]

in my SUBSCRIBERS table I have the following entry:

Username = ugo
Password = ....
Checkattr = (NULL)
ReplyAttr = 'Class = 3, Idle-Timeout = 600'
TimeLeft = (NULL)

WHERE am I supposed to see the replyattr? The access point is not doing 
what is specified there and radpwtst doesn't show any reply attribute as 
well. what's wrong?

I have to send "Class = 3, Idle-Timeout = 600" to almost anyone. How do 
I do that? The best solution would be a per-user granularity (so the 
SUBSCRIBERS table fits) but it doesn't seem to work.

Any suggestion?

here's radpwtst output:


Reading dictionary file '/etc/radiator/dictionary'
sending Access-Request...
Packet dump:
*** Sending to 127.0.0.1 port 1645 ....
Code:       Access-Request
Identifier: 161
Authentic:  1234567890123456
Attributes:
        User-Name = "ugo"
        Service-Type = Framed-User
        NAS-IP-Address = 203.63.154.1
        NAS-Port = 1234
        Called-Station-Id = "123456789"
        Calling-Station-Id = "987654321"
        NAS-Port-Type = Async
        User-Password = 
"<145>g<172><177><131><203><179>k<178>1<195>]<152><25>7<136>"

Packet dump:
*** Received from 127.0.0.1 port 1645 ....
Code:       Access-Accept
Identifier: 161
Authentic:  <132>|<244>c<P<177><160><148><17><28><28>kxD<144>
Attributes:

OK
sending Accounting-Request Start...
Packet dump:
*** Sending to 127.0.0.1 port 1646 ....
Code:       Accounting-Request
Identifier: 162
Authentic:  <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
        User-Name = "ugo"
        Service-Type = Framed-User
        NAS-IP-Address = 203.63.154.1
        NAS-Port = 1234
        NAS-Port-Type = Async
        Acct-Session-Id = "00001234"
        Acct-Status-Type = Start
        Called-Station-Id = "123456789"
        Calling-Station-Id = "987654321"
        Acct-Delay-Time = 0

Packet dump:
*** Received from 127.0.0.1 port 1646 ....
Code:       Accounting-Response
Identifier: 162
Authentic:  -<203>Fc<170>z~f<169><19><233><139><223><231>8<225>
Attributes:

OK
sending Accounting-Request Stop...
Packet dump:
*** Sending to 127.0.0.1 port 1646 ....
Code:       Accounting-Request
Identifier: 163
Authentic:  <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
        User-Name = "ugo"
        Service-Type = Framed-User
        NAS-IP-Address = 203.63.154.1
        NAS-Port = 1234
        NAS-Port-Type = Async
        Acct-Session-Id = "00001234"
        Acct-Status-Type = Stop
        Called-Station-Id = "123456789"
        Calling-Station-Id = "987654321"
        Acct-Delay-Time = 0
        Acct-Session-Time = 1000
        Acct-Input-Octets = 20000
        Acct-Output-Octets = 30000

Packet dump:
*** Received from 127.0.0.1 port 1646 ....
Code:       Accounting-Response
Identifier: 163
Authentic:  <248>a<136>X<242><233><202><174><164>v<152><194><218><22>A<8>
Attributes:

OK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.open.com.au/pipermail/radiator/attachments/20031010/c561238a/attachment.html>