(RADIATOR) Profiles problems
Hugh Irvine
hugh at open.com.au
Thu Nov 13 00:31:43 CST 2003
Hello Brandon -
You have set the AuthByPolicy ContinueWhileAccept, but your first
AuthBy clause has "AuthSelect" to disable authentication.
Why do you have different AuthBy clauses for authentication and
accounting?
If you want to keep this structure, you will need to use an AuthBy
GROUP and alter the AuthByPolicy inside it:
<Realm DEFAULT>
.....
# AuthByPolicy to do both accounting and authentication
AuthByPolicy ContinueAlways
<AuthBy SQL>
.....
# disable authentication
AuthSelect
# do accounting
.....
</AuthBy>
#define AuthBy GROUP
# use different AuthByPolicy
<AuthBy GROUP>
AuthByPolicy ContinueWhileAccept
<AuthBy SQL>
# do authentication
.....
</AuthBy>
<AuthBy SQL>
# check time
.....
</AuthBy>
</AuthBy>
</Realm>
regards
Hugh
On 13/11/2003, at 5:03 PM, Brandon Lehmann wrote:
> Hugh,
>
> I just took a look around. Changed it to Time set it correctly in
> the
> SQL database, made it a check item. Set to ContinueWhileAccept. Trace
> -4
> reveals that "Authentication is Disabled"
> I'm confused...
>
> Brandon
> ----- Original Message -----
> From: "Hugh Irvine" <hugh at open.com.au>
> To: "Brandon Lehmann" <blehmann at glis.cc>
> Cc: <owner-radiator at open.com.au>; <radiator at open.com.au>
> Sent: Wednesday, November 12, 2003 11:20 PM
> Subject: Re: (RADIATOR) Profiles problems
>
>
>>
>> Hello Brandon -
>>
>> Thanks for your mail.
>>
>> Unfortunately I meant "a trace 4 debug from Radiator" (not a trace 4
>> debug from radpwtst).
>>
>> In any event, I suspect that at the very least the "TimeOfDay" radius
>> attribute is not defined in your Radiator dictionary.
>>
>> regards
>>
>> Hugh
>>
>>
>> On 13/11/2003, at 9:45 AM, Brandon Lehmann wrote:
>>
>>> Hugh,
>>>
>>> Note: I don't care that I left my ip address in there or the
>>> "encrypted"
>>> password. This is a test server with test data.
>>>
>>> Brandon
>>>
>>> ----- Original Message -----
>>> From: "Brandon Lehmann" <blehmann at glis.cc>
>>> To: "Hugh Irvine" <hugh at open.com.au>
>>> Cc: <owner-radiator at open.com.au>; <radiator at open.com.au>
>>> Sent: Wednesday, November 12, 2003 5:43 PM
>>> Subject: Re: (RADIATOR) Profiles problems
>>>
>>>
>>>> Hugh,
>>>>
>>>> Trace 4 with the config in my original message shows:
>>>>
>>>> --- START----
>>>> Reading dictionary file './dictionary'
>>>> sending Access-Request...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1645 ....
>>>> Code: Access-Request
>>>> Identifier: 120
>>>> Authentic: 1234567890123456
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> NAS-Port-Type = Async
>>>> User-Password =
>>>> ".<255>x]<205>2><212><197><219>Sj<143><221><224><129>"
>>>>
>>>> No reply
>>>> sending Accounting-Request Start...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 121
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Start
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 121
>>>> Authentic: f>e#O#<156><150>S<239>N<240><234><182><23><229>
>>>> Attributes:
>>>>
>>>> OK
>>>> sending Accounting-Request Stop...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 122
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Stop
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>> Acct-Session-Time = 1000
>>>> Acct-Input-Octets = 20000
>>>> Acct-Output-Octets = 30000
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 122
>>>> Authentic: 5Y<2>V<137><180>L<2>R<138>vzai<248><184>
>>>> Attributes:
>>>>
>>>> OK
>>>> -----END----
>>>>
>>>>
>>>> Chaning AuthByPolicy to ContinueWhileAccept returns this:
>>>>
>>>> -----START-----
>>>> Reading dictionary file './dictionary'
>>>> sending Access-Request...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1645 ....
>>>> Code: Access-Request
>>>> Identifier: 81
>>>> Authentic: 1234567890123456
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> NAS-Port-Type = Async
>>>> User-Password =
>>>> ".<255>x]<205>2><212><197><219>Sj<143><221><224><129>"
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1645 ....
>>>> Code: Access-Reject
>>>> Identifier: 81
>>>> Authentic: <201>KV<189>Ao<213><235><254>3<22>z>h<239><4>
>>>> Attributes:
>>>> Reply-Message = "Request Denied"
>>>>
>>>> Rejected: Request Denied
>>>> sending Accounting-Request Start...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 82
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Start
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 82
>>>> Authentic:
>>>> <237><157><221><24><8><3><11><235><207><167>t<226>SVQ<227>
>>>> Attributes:
>>>>
>>>> OK
>>>> sending Accounting-Request Stop...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 83
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Stop
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>> Acct-Session-Time = 1000
>>>> Acct-Input-Octets = 20000
>>>> Acct-Output-Octets = 30000
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 83
>>>> Authentic: <4>\<212>g'`<252><214><23><246>>A]<136><172><174>
>>>> Attributes:
>>>>
>>>> OK
>>>>
>>>> ----END-----
>>>>
>>>> Removing the Authby clause for the profile & timeofday returns this
>>>> (with
>>>> ContinueWhileAccept):
>>>>
>>>> ----START------
>>>> Reading dictionary file './dictionary'
>>>> sending Access-Request...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1645 ....
>>>> Code: Access-Request
>>>> Identifier: 251
>>>> Authentic: 1234567890123456
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> NAS-Port-Type = Async
>>>> User-Password =
>>>> ".<255>x]<205>2><212><197><219>Sj<143><221><224><129>"
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1645 ....
>>>> Code: Access-Reject
>>>> Identifier: 251
>>>> Authentic: <2>I<24> <180>7<222><164><151>k<213><22>O<15><255>N
>>>> Attributes:
>>>> Reply-Message = "Request Denied"
>>>>
>>>> Rejected: Request Denied
>>>> sending Accounting-Request Start...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 252
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Start
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 252
>>>> Authentic: <203>r<199><16>8<247>G<146><29>fe<135>`<20><133>Q
>>>> Attributes:
>>>>
>>>> OK
>>>> sending Accounting-Request Stop...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 253
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Stop
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>> Acct-Session-Time = 1000
>>>> Acct-Input-Octets = 20000
>>>> Acct-Output-Octets = 30000
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 253
>>>> Authentic: TZ<243><171><164><236><146>h<14>+<186>)<190><14><<197>
>>>> Attributes:
>>>>
>>>> OK
>>>> ----------END---------
>>>>
>>>> And with the authbyclaus for timeofday removed and the policy set to
>>>> ContinueAlways:
>>>>
>>>> --------START---------
>>>> Reading dictionary file './dictionary'
>>>> sending Access-Request...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1645 ....
>>>> Code: Access-Request
>>>> Identifier: 62
>>>> Authentic: 1234567890123456
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> NAS-Port-Type = Async
>>>> User-Password =
>>>> ".<255>x]<205>2><212><197><219>Sj<143><221><224><129>"
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1645 ....
>>>> Code: Access-Accept
>>>> Identifier: 62
>>>> Authentic:
>>>> 9<165>Y<201><211><140><2>u<210><251><161><200>3<149><179><1>
>>>> Attributes:
>>>> Service-Type = Framed-User
>>>> Session-Timeout = 18000
>>>> Idle-Timeout = 1740
>>>> Framed-IP-Netmask = 255.255.255.255
>>>> Port-Limit = 3
>>>>
>>>> OK
>>>> sending Accounting-Request Start...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 63
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Start
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 63
>>>> Authentic: <1>.<245><190>|!.1g<201>0<201><148><229><234>%
>>>> Attributes:
>>>>
>>>> OK
>>>> sending Accounting-Request Stop...
>>>> Packet dump:
>>>> *** Sending to 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Request
>>>> Identifier: 64
>>>> Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
>>>> Attributes:
>>>> User-Name = "brandon"
>>>> Service-Type = Framed-User
>>>> NAS-IP-Address = 203.63.154.1
>>>> NAS-Port = 1234
>>>> NAS-Port-Type = Async
>>>> Acct-Session-Id = "00001234"
>>>> Acct-Status-Type = Stop
>>>> Called-Station-Id = "123456789"
>>>> Calling-Station-Id = "987654321"
>>>> Acct-Delay-Time = 0
>>>> Acct-Session-Time = 1000
>>>> Acct-Input-Octets = 20000
>>>> Acct-Output-Octets = 30000
>>>>
>>>> Packet dump:
>>>> *** Received from 63.148.117.3 port 1646 ....
>>>> Code: Accounting-Response
>>>> Identifier: 64
>>>> Authentic: <237><203>Z_<169><202>Um#&<241><136><29>8<145><23>
>>>> Attributes:
>>>>
>>>> OK
>>>> --------END----------
>>>>
>>>> As for a crash course in TimeOfDay, its a radius attribute that is
>>>> used to
>>>> define when a user can login. Say 7:30am to 3:30pm etc ->
>>>> "07:30-15:30" or
>>>> cannot login "!00:00-02:00" -> midnight to 2am. It is pretty similar
>>>> to
>>> the
>>>> Radiator Time attribute. However I have tried changing the columndef
>>>> to
>>>> "AuthColumnDef 0,Time,reply" and adding "Al" to the front of the
>>>> field to
>>>> apply for all days as the radiator manual shows. What I need to do
>>>> is
>>> limit
>>>> a few users to only login during certain hours (at their bosses
>>>> request).
>>>> For now I have just added a stored procedure to my SQL server and a
>>>> job to
>>>> turn the account on and off at the specified time however that will
>>>> not
>>> work
>>>> forever.
>>>>
>>>> Thanks for the help,
>>>>
>>>> Brandon
>>>>
>>>> Note: This is running Radiator 3.7.1 on Windows 2000 SP4, w/
>>>> activestate
>>>> perl 5.6.1 using a 3com total control.
>>>>
>>>> ----- Original Message -----
>>>> From: "Hugh Irvine" <hugh at open.com.au>
>>>> To: "Brandon Lehmann" <blehmann at glis.cc>
>>>> Cc: <owner-radiator at open.com.au>; <radiator at open.com.au>
>>>> Sent: Wednesday, November 12, 2003 5:03 PM
>>>> Subject: Re: (RADIATOR) Profiles problems
>>>>
>>>>
>>>>>
>>>>> Hello Brandon -
>>>>>
>>>>> Could you please send me a trace 4 debug showing what is happening,
>>>>> and
>>>>> a bit more detail on what exactly you are wanting to have happen? I
>>>>> am
>>>>> not clear on what the TimeOfDay reply item is meant to do.
>>>>>
>>>>> regards
>>>>>
>>>>> Hugh
>>>>>
>>>>>
>>>>> On 13/11/2003, at 7:10 AM, Brandon Lehmann wrote:
>>>>>
>>>>>> Hi List,
>>>>>>
>>>>>> I cannot get the radius server to return the profile while using
>>>>>> the following configuration:
>>>>>>
>>>>>> ------START-----
>>>>>> LogStdout c:/radiator/stdout.txt
>>>>>> LogDir c:/radiator
>>>>>> DbDir c:/radiator.
>>>>>>
>>>>>> <Client DEFAULT>
>>>>>> Secret !removed for my protection!
>>>>>> DupInterval 0
>>>>>> </Client>
>>>>>>
>>>>>> <Realm DEFAULT>
>>>>>>
>>>>>> AuthByPolicy ContinueAlways
>>>>>>
>>>>>> <AuthBy SQL>
>>>>>> Identifier ACCT1
>>>>>> DBSource dbi:ODBC:!removed for my protection!
>>>>>> DBUsername !removed for my protection!
>>>>>> DBAuth !removed for my protection!
>>>>>>
>>>>>> AuthSelect
>>>>>>
>>>>>> AccountingTable radacct1
>>>>>> AcctColumnDef UserName,User-Name
>>>>>> AcctColumnDef LogDateTime,Timestamp,integer-date
>>>>>> AcctColumnDef AcctStatusType,Acct-Status-Type
>>>>>> AcctColumnDef AcctDelayTime,Acct-Delay-Time,integer
>>>>>> AcctColumnDef AcctInputOctets,Acct-Input-Octets,integer
>>>>>> AcctColumnDef
>>>>>> AcctOutputOctets,Acct-Output-Octets,integer
>>>>>> AcctColumnDef
>>>>>> AcctInputPackets,Acct-Input-Packets,integer
>>>>>> AcctColumnDef
>>>>>> AcctOutputPackets,Acct-Output-Packets,integer
>>>>>> AcctColumnDef AcctSessionTime,Acct-Session-Time,integer
>>>>>> AcctColumnDef AcctTerminateCause,Acct-Terminate-Cause
>>>>>> AcctColumnDef NasIPAddress,NAS-IP-Address
>>>>>> AcctColumnDef NasIdentifier,NAS-Identifier
>>>>>> AcctColumnDef NasPortId,NAS-Port,integer
>>>>>> AcctColumnDef NasPortType,NAS-Port-Type,integer
>>>>>> AcctColumnDef ConnectInfo,Connect-Info
>>>>>> AcctColumnDef ServiceType,Service-Type
>>>>>> AcctColumnDef FramedProtocol,Framed-Protocol
>>>>>> AcctColumnDef FramedAddress,Framed-IP-Address
>>>>>> AcctColumnDef CallingStationId,Calling-Station-Id
>>>>>> </AuthBy>
>>>>>>
>>>>>> <AuthBy SQL>
>>>>>> Identifier AUTH1
>>>>>> DBSource dbi:ODBC:!removed for my protection!
>>>>>> DBUsername !removed for my protection!
>>>>>> DBAuth !removed for my protection!
>>>>>>
>>>>>> AuthSelect select
>>>>>> ClearTextPassword,ServiceType,SessionLimit, \
>>>>>> IdleLimit,StaticIP,IPNetmask,FramedRoute,PortLimit,
>>>>>> \
>>>>>> PortLimit,ProfileID from Customers where
>>>>>> CustomerID=%0 \
>>>>>> and Disable is null
>>>>>> AuthColumnDef 0,Password,check
>>>>>> AuthColumnDef 1,Service-Type,reply
>>>>>> AuthColumnDef 2,Session-Timeout,reply
>>>>>> AuthColumnDef 3,Idle-Timeout,reply
>>>>>> AuthColumnDef 4,Framed-IP-Address,reply
>>>>>> AuthColumnDef 5,Framed-IP-Netmask,reply
>>>>>> AuthColumnDef 6,Framed-Route,reply
>>>>>> AuthColumnDef 7,Port-Limit,reply
>>>>>> AuthColumnDef 8,Simultaneous-Use,check
>>>>>> AuthColumnDef 9,Profile,reply
>>>>>> </AuthBy>
>>>>>> <AuthBy SQL>
>>>>>> DBSource dbi:ODBC:!removed for my protection!
>>>>>> DBUsername !removed for my protection!
>>>>>> DBAuth !removed for my protection!
>>>>>>
>>>>>> AuthSelect SELECT timeofday FROM profiles WHERE \
>>>>>> [profile]='%{Reply:Profile}'
>>>>>> AuthColumnDef 0,TimeOfDay,reply
>>>>>>
>>>>>> StripFromReply Profile
>>>>>> </AuthBy>
>>>>>>
>>>>>> SessionDatabase SDB1
>>>>>>
>>>>>> </Realm>
>>>>>>
>>>>>> <SessionDatabase SQL>
>>>>>> Identifier SDB1
>>>>>> DBSource dbi:ODBC:!removed for my protection!
>>>>>> DBUsername !removed for my protection!
>>>>>> DBAuth !removed for my protection!
>>>>>> </SessionDatabase>
>>>>>> -------END----
>>>>>>
>>>>>> If I change "AuthByPolicy ContinueAlways" to "AuthByPolicy
>>>>>> ContinueWhileAccept" then the server always returns "Request
>>>>>> Denied".
>>>>>> Any
>>>>>> input would be greatly appreciated. Note: I have already searched
>>>>>> the
>>>>>> list
>>>>>> archives, nothing seems to work.
>>>>>>
>>>>>> Thank you,
>>>>>>
>>>>>> Brandon Lehmann
>>>>>> Network Administrator
>>>>>> Great Lakes Internet Service, LLC.
>>>>>> The Computer Loft, Inc.
>>>>>> 218 Justice St
>>>>>> Fremont, Ohio 43420
>>>>>> 419.332.3553
>>>>>> blehmann at glis.cc
>>>>>>
>>>>>> ===
>>>>>> Archive at http://www.open.com.au/archives/radiator/
>>>>>> Announcements on radiator-announce at open.com.au
>>>>>> To unsubscribe, email 'majordomo at open.com.au' with
>>>>>> 'unsubscribe radiator' in the body of the message.
>>>>>>
>>>>>>
>>>>>
>>>>> NB: have you included a copy of your configuration file (no
>>>>> secrets),
>>>>> together with a trace 4 debug showing what is happening?
>>>>>
>>>>> --
>>>>> Radiator: the most portable, flexible and configurable RADIUS
>>>>> server
>>>>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>>>>> -
>>>>> Nets: internetwork inventory and management - graphical,
>>>>> extensible,
>>>>> flexible with hardware, software, platform and database
>>>>> independence.
>>>>> -
>>>>> CATool: Private Certificate Authority for Unix and Unix-like
>>>>> systems.
>>>>>
>>>>>
>>>>
>>>
>>> ===
>>> Archive at http://www.open.com.au/archives/radiator/
>>> Announcements on radiator-announce at open.com.au
>>> To unsubscribe, email 'majordomo at open.com.au' with
>>> 'unsubscribe radiator' in the body of the message.
>>>
>>>
>>
>> NB: have you included a copy of your configuration file (no secrets),
>> together with a trace 4 debug showing what is happening?
>>
>> --
>> Radiator: the most portable, flexible and configurable RADIUS server
>> anywhere. Available on *NIX, *BSD, Windows, MacOS X.
>> -
>> Nets: internetwork inventory and management - graphical, extensible,
>> flexible with hardware, software, platform and database independence.
>> -
>> CATool: Private Certificate Authority for Unix and Unix-like systems.
>>
>> ===
>> Archive at http://www.open.com.au/archives/radiator/
>> Announcements on radiator-announce at open.com.au
>> To unsubscribe, email 'majordomo at open.com.au' with
>> 'unsubscribe radiator' in the body of the message.
>>
>
>
NB: have you included a copy of your configuration file (no secrets),
together with a trace 4 debug showing what is happening?
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows, MacOS X.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
-
CATool: Private Certificate Authority for Unix and Unix-like systems.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list