(RADIATOR) Can't get PEAP to work, need help.
Tom Rixom
tom.rixom at alfa-ariss.com
Mon Jun 23 08:18:52 CDT 2003
Make sure you have the correct/latest SSLeay library.
The output message that Radiator sends back looks weird:
EAP-Message = "<4><2><0><4>"
Signature = "<0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>"
EAP-Message = "<1><3><0><6><25><0>"
Two EAP-Messages? One reject and one PEAP ack
Regards,
Tom.
> -----Original Message-----
> From: Jerome Fleury [mailto:jeje at jeje.org]
> Sent: Monday, June 23, 2003 2:23 PM
> To: Hugh Irvine
> Cc: radiator at open.com.au
> Subject: Re: (RADIATOR) Can't get PEAP to work, need help.
>
>
> --On Friday, June 20, 2003 10:10:46 AM +1000 Hugh Irvine
> <hugh at open.com.au> wrote:
>
> >
> > Salut Jerome -
> >
> > It looks like Radiator is crashing if the log stops as
> shown. You will need to look at the
> > Perl output to see what the error is, but it is usually a
> missing module that has not been
> > loaded. The easiest way to see what is happening is to run
> radiusd from the command line like
> > this:
> >
> > perl radiusd -foreground -log_stdout -trace 4 -config_file .....
> >
> > where "...." is the name of your configuration file.
>
> Thanks for help Hugh.
>
> I tried this, but the server is not crashing. It just stops
> processing. Added some debug in the
> EAP_25.pm code and got this:
>
> Mon Jun 23 14:04:09 2003: DEBUG: Handling request with Handler ''
> Mon Jun 23 14:04:09 2003: DEBUG: Deleting session for
> testUser, 172.30.24.10, 78
> Mon Jun 23 14:04:09 2003: DEBUG: Handling with Radius::AuthFILE:
> Mon Jun 23 14:04:09 2003: DEBUG: Handling with EAP: code 2, 2, 94
> Mon Jun 23 14:04:09 2003: DEBUG: Response type 25
> Mon Jun 23 14:04:09 2003: DEBUG: jeje - else2
> Mon Jun 23 14:04:09 2003: DEBUG: jeje - 25, PEAP
> Mon Jun 23 14:04:09 2003: DEBUG: EAP TLS SSL_accept result:
> -1, 2, 8465
> Mon Jun 23 14:04:09 2003: ERR: jeje - want read
> Mon Jun 23 14:04:09 2003: ERR: EAP TLS error: -1, 2, 8465,
> Mon Jun 23 14:04:09 2003: DEBUG: Access challenged for
> testUser: EAP PEAP Challenge
> Mon Jun 23 14:04:09 2003: DEBUG: Packet dump:
> *** Sending to 172.30.24.10 port 1645 ....
> Code: Access-Challenge
> Identifier: 215
> Authentic: NW<237>T?<254>DT<202><146><22>|z<4><219><161>
> Attributes:
> EAP-Message = "<4><2><0><4>"
> Signature = "<0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>"
> EAP-Message = "<1><3><0><6><25><0>"
>
>
> It seems like I'm stuck in the ERROR_WANT_READ block code,
> which does nothing, and this does
> this all the time, wether I'm doing EAP-TTLS or EAP-PEAP. It
> looks definitely like a
> Radiator/SSL issue, but I'm stuck by this lack of information.
> First I guessed it was my version of OpenSSL (it was 0.9.6c),
> but after upgrading to the most
> recent one, I still have this problem.
>
> I'm looking forward to any suggestion one could have.
>
>
> > Note the list of prerequisite modules that are listed in
> the comment block at the top of the
> > "eap_peap.cfg" file.
> >
> > regards
> >
> > Hugh
> >
> >
> > On Thursday, Jun 19, 2003, at 23:49 Australia/Melbourne,
> Jerome Fleury wrote:
> >
> >> Here is the test config:
> >>
> >> Client: Cisco Aironet/Orinoco
> >> 802.1X client: 2000+hotfix/Funk Odyssey
> >> AP: Cisco Aironet 1100
> >>
> >> I use the test config from goodies/eap_peap.cfg with this
> modification:
> >>
> >> Filename %D/users-wifi
> >>
> >> (is there any special entry to put in this file ? anonymous user ?)
> >>
> >> As soon as I enter my credentials (802.1X identification
> window from
> >> Windows 2000 appears), the
> >> radius request launches from the AP:
> >>
> >> .Jun 19 13:42:01.250: dot11_dot1x_run_rfsm: current state
> CLIENT_WAIT,
> >> received CLIENT_REPLY,
> >> mac: 0060.1df0.3503
> >> .Jun 19 13:42:01.250: dot11_dot1x_send_response_to_server: Sending
> >> client data to server
> >> .Jun 19 13:42:01.251: RADIUS/ENCODE(00003489):
> acct_session_id: 13473
> >> .Jun 19 13:42:01.251: RADIUS(00003489): sending
> >> .Jun 19 13:42:01.252: RADIUS: Send to unknown id 44
> 172.30.19.3:1812,
> >> Access-Request, len 128
> >> .Jun 19 13:42:01.252: RADIUS: authenticator 52 44 49 1C
> E4 86 B3 78 -
> >> E9 F8 87 6C B1 59 CA FF
> >> .Jun 19 13:42:01.252: RADIUS: User-Name [1] 5 "ben"
> >> .Jun 19 13:42:01.252: RADIUS: Framed-MTU [12] 6 1400
> >> .Jun 19 13:42:01.252: RADIUS: Called-Station-Id [30] 16
> >> "0002.8a5b.400f"
> >> .Jun 19 13:42:01.252: RADIUS: Calling-Station-Id [31] 16
> >> "0060.1df0.3503"
> >> .Jun 19 13:42:01.252: RADIUS: NAS-Port-Type [61] 6
> 802.11
> >> wireless [19]
> >> .Jun 19 13:42:01.252: RADIUS: Message-Authenticato[80] 18 *
> >> .Jun 19 13:42:01.252: RADIUS: EAP-Message [79] 8
> >> .Jun 19 13:42:01.253: RADIUS: 02 03 00 06
>
> >> [????]
> >> .Jun 19 13:42:01.253: RADIUS: NAS-Port-Type [61] 6
> Virtual
> >> [5]
> >> .Jun 19 13:42:01.253: RADIUS: NAS-Port [5] 6 159
> >> .Jun 19 13:42:01.253: RADIUS: Service-Type [6] 6
> Login
> >> [1]
> >> .Jun 19 13:42:01.254: RADIUS: NAS-IP-Address [4] 6
> >> 172.30.24.10
> >> .Jun 19 13:42:01.254: RADIUS: Nas-Identifier [32] 9
> "ap2.gre"
> >> .Jun 19 13:42:06.253: RADIUS: Retransmit to
> (172.30.19.3:1812,1813)
> >> for id 44
> >> .Jun 19 13:42:12.056: RADIUS: Retransmit to
> (172.30.19.3:1812,1813)
> >> for id 44
> >> .Jun 19 13:42:17.057: RADIUS: Retransmit to
> (172.30.19.3:1812,1813)
> >> for id 44
> >> .Jun 19 13:42:21.899: dot11_dot1x_parse_client_pak: Received EAPOL
> >> packet from 0060.1df0.3503
> >> .Jun 19 13:42:21.899: EAPOL pak dump rx
> >> .Jun 19 13:42:21.899: EAPOL Version: 0x1 type: 0x1 length: 0x0000
> >> 00E126C0: 01010000 ....
> >> .Jun 19 13:42:21.899: dot11_dot1x_run_rfsm: current state
> SERVER_WAIT,
> >> received EAP_START, mac:
> >> 0060.1df0.3503
> >> .Jun 19 13:42:21.900: dot11_dot1x_ignore_event: Ignore event: do
> >> nothing
> >> .Jun 19 13:42:22.188: RADIUS: Tried all servers.
> >> .Jun 19 13:42:22.188: RADIUS: No valid server found.
> Trying any viable
> >> server
> >> .Jun 19 13:42:22.188: RADIUS: Tried all servers.
> >> .Jun 19 13:42:22.188: RADIUS: No response from
> (172.30.19.3:1812,1813)
> >> for id 44
> >> .Jun 19 13:42:22.188: RADIUS/DECODE: parse response no app
> start; FAIL
> >> .Jun 19 13:42:22.188: RADIUS/DECODE: parse response; FAIL
> >>
> >>
> >> As you can see, the Radius server seems not to respond, and AP
> >> retransmits.
> >>
> >> Here are the logs on Radiator:
> >>
> >> Code: Access-Request
> >> Identifier: 44
> >> Authentic: RDI<28><228><134><179>x<233><248><135>l<177>Y<202><255>
> >> Attributes:
> >> User-Name = "ben"
> >> Framed-MTU = 1400
> >> Called-Station-Id = "0002.8a5b.400f"
> >> Calling-Station-Id = "0060.1df0.3503"
> >> NAS-Port-Type = 19
> >> Signature =
> >> "<14><184>;<197>Q<12>;<219>Y5<209><240><179>%<181><184>"
> >> EAP-Message = "<2><3><0><6><25>"
> >> NAS-Port-Type = Virtual
> >> NAS-Port = 159
> >> Service-Type = Login-User
> >> NAS-IP-Address = 172.30.24.10
> >> NAS-Identifier = "ap2.gre"
> >>
> >> Thu Jun 19 15:42:17 2003: DEBUG: Handling request with Handler ''
> >> Thu Jun 19 15:42:17 2003: DEBUG: Deleting session for ben,
> >> 172.30.24.10, 159
> >> Thu Jun 19 15:42:17 2003: DEBUG: Handling with Radius::AuthFILE:
> >> Thu Jun 19 15:42:17 2003: DEBUG: Handling with EAP: code 2, 3, 6
> >> Thu Jun 19 15:42:17 2003: DEBUG: Response type 25
> >>
> >> and that's pretty all. No error to help me out.
> >>
> >> Has anybody any clue about that ?
> >>
> >> Thanks.
> >> --
> >> Jerome Fleury
> >> ===
> >> Archive at http://www.open.com.au/archives/radiator/
> >> Announcements on radiator-announce at open.com.au
> >> To unsubscribe, email 'majordomo at open.com.au' with
> >> 'unsubscribe radiator' in the body of the message.
> >>
> >>
> >
> > NB: have you included a copy of your configuration file (no
> secrets),
> > together with a trace 4 debug showing what is happening?
> >
> > --
> > Radiator: the most portable, flexible and configurable RADIUS server
> > anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
> > -
> > Nets: internetwork inventory and management - graphical, extensible,
> > flexible with hardware, software, platform and database
> independence.
> >
>
>
>
> --
> Jerome Fleury
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
>
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list